Where is the Volkswagen external circulation button located?

1 Answers
AlejandroMarie
07/25/25 4:06am
The internal and external circulation switches for Volkswagen vehicles are located in the air conditioning control area in the center of the dashboard. Below is the relevant introduction: 1. Internal/External Circulation: Internal circulation refers to heating or cooling the air inside the car and then recirculating it back into the cabin, while external circulation allows outside air to enter the vehicle. During traffic jams, in tunnels, or when the external air quality does not meet standards, internal circulation should be prioritized. On highways, it is advisable to periodically switch from internal to external circulation, with internal circulation usage preferably not exceeding one hour. 2. Temperature Zone Synchronization (available in some models): When the temperature zone synchronization function is activated, changing the temperature setting for the driver's seat will automatically adjust the temperature in other zones accordingly. Turning off this synchronization allows each zone to be set individually, catering to the needs of passengers in different seating positions.
Was this review help?
3
2
Share
More Forum Discussions

How many SUV models does Chery have?

Chery's SUV lineup includes the Tiggo 3, Tiggo 3x, Tiggo 5x, Tiggo 7, Tiggo 8, Tiggo 3xe, Tiggo e, and others. The Tiggo 8 is a mid-size SUV from Chery with a wheelbase of 2710 mm, and its length, width, and height are 4700 mm, 1860 mm, and 1746 mm respectively. The Tiggo 8 is equipped with two engine options: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 and 4000 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm, achieving its maximum power at 5500 rpm and its peak torque between 2000 and 4000 rpm. This engine employs direct fuel injection technology and uses an all-aluminum cylinder head and block.
4
0
Share

How many kilometers can the BYD Yuan travel?

The BYD Yuan can travel 847km on a full tank of fuel. The fuel tank capacity is 50 liters, which is the officially announced data. Owners who have purchased the BYD Yuan can also check this information on the vehicle's configuration sheet. The BYD Yuan uses 92-octane gasoline, with a fuel consumption of 5.9L per 100 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
13
3
Share

Where is the Low Beam Light?

The switch for the low beam light is generally located on the left side of the dashboard, near the door. Turning it one notch activates the low beam. Below is some extended information about low beam lights: 1. The illumination distance of low beam lights is approximately 30-40 meters. Experiments have shown that when driving at 55 km/h at night, the stopping distance after immediately applying the brakes is exactly 30 meters. This means that if an object is detected within the low beam's illumination range and the brakes are applied immediately, there will be no gap between the vehicle and the object. 2. Function: Although low beam lights have an illumination distance of about 30 meters, they feature a very distinct beam cutoff line. Most vehicles' low beam lights measure an illumination distance of 30-40 meters, with the beam cutoff line located at around 12-18 meters. The area in front of the beam cutoff line is brightly lit, allowing clear identification of objects, and a clearly visible illuminated area of 2-3 meters in diameter on the ground. The area behind the beam cutoff line, extending 30-40 meters, primarily relies on ground-reflected light. This area can distinguish brightly colored objects, but stationary dark-toned objects on the road are not easily noticeable.
10
3
Share

What is the thing called that is placed behind the rear seats of a car?

Car trunk mat. A car trunk mat, also known as a car tailbox mat, refers to the mat placed at the bottom of the car trunk. The car trunk is a place for storing items, and its role should not be overlooked. The car trunk serves as the car's storage compartment, and the trunk mat can effectively protect the car trunk, preventing dirt or liquids from entering and eroding the trunk surface, as well as preventing items inside the trunk from sliding. Below are the reasons and solutions for a trunk that won't open: 1. Linkage rod or lock cylinder issue: If you frequently use a key to open the trunk lid, it might be due to a broken linkage rod, and you should go to a repair shop to have it opened. If you always use a remote control to open the trunk lid, the lock cylinder might be dirty or rusty; spraying some rust remover into the lock cylinder a few times can help open it. 2. Not unlocked: The trunk is difficult to open because it hasn't been unlocked with the remote key. It's best to press the unlock button on the key before trying to open it, or check if the key battery is dead. 3. Mechanical part failure: The trunk itself might have a problem, such as a broken wire or other trunk-related issues causing the car trunk not to open.
17
2
Share

How to Deal with Water Accumulation in the Rear Foot Mats of a BMW 3 Series?

Use a special adhesive for waterproof strips to reattach them, which can completely prevent water leakage. Here are the specific details: 1. Leakage situation: The waterproof strips embedded around the doors are prone to misalignment. If rainwater enters the car, check the waterproof strips. For loose waterproof strips, reattach them with a special adhesive. Restore the sealing performance to prevent further water leakage. For older cars, also pay attention to the aging of the waterproof strips. Most door perimeter leaks are caused by the surrounding waterproof strips. Check for any breaks or peeling. If part of the waterproof strip is raised or twisted, rainwater often enters from there. If severely deformed, replacement is necessary. If peeling occurs, use a waterproof adhesive called sealant to reattach it, being careful not to pull too hard to avoid damage. 2. Waterproof strips: If a small part is loose and difficult to reattach, simply peel it off and reattach it to fix any twisting or slackness. Waterproof strips are also applied around the trunk, often causing tight or twisted bends where rainwater seeps through gaps. After peeling off and reattaching the waterproof strip, apply a rubber protectant to restore elasticity, which can resolve the issue.
11
1
Share

Why does Mercedes-Benz prompt for abnormal tire pressure?

Mercedes-Benz tire pressure abnormalities generally have the following 3 reasons: Abnormal tire pressure: Usually, it will trigger an alarm when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new component is possible. According to the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5bar. In winter, the tire pressure should be based on the standard tire pressure of the car tire, with an appropriate increase of about 0.2bar. In summer, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.