Where is the Volkswagen CC produced?

1 Answers
LoganLee
07/29/25 12:00pm
The Volkswagen CC is produced in Changchun, Jilin. Configuration: Most models are equipped with features such as airbags, tire pressure monitoring system, full-seatbelt reminder, lane change assist, lane departure warning system, lane keeping assist system, autonomous emergency braking, rear parking radar, reverse camera, adaptive cruise control, engine start-stop technology, auto hold, hill start assist, electric sunroof, aluminum alloy wheels, keyless start system, front keyless entry function, and more. Powertrain: The entire lineup is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 162ps and peak torque of 350 Nm, complying with China VI emission standards. In terms of transmission, all models are paired with a 7-speed dual-clutch transmission.
Was this review help?
11
5
Share
More Forum Discussions

What are the correct steps to start and park an automatic transmission car?

The correct steps to start and park an automatic transmission car are as follows: Starting: 1. After sitting in the driver's seat, do not press the brake pedal, simply press the start button once. At this point, the ACC light will turn on, and the vehicle will perform a self-check. Note: If it is a mechanical key ignition, turn the ignition key to the second position, to the ACC (accessory) position, allowing the car's computer system to begin the self-check for at least 6 seconds or more. 2. Ensure the handbrake is engaged and the gear is in P (Park) or Neutral. Press the brake pedal and press the start button again to ignite and start the engine. Note: For mechanical keys, directly turn the ignition key to the ON position to start the engine. 3. Release the foot brake. You may choose to warm up the car for 1-3 minutes; specifically, check the coolant temperature gauge on the dashboard. When the needle reaches 90 degrees, it indicates the car is sufficiently warmed up. 4. Press the foot brake again, shift to D (Drive), and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Observe road conditions, watch for approaching vehicles from behind and pedestrians on the side. You may turn on the turn signal when starting, slowly release the foot brake, gently press the accelerator, and complete the starting process. Parking: 1. Release the accelerator and press the brake pedal to bring the vehicle to a smooth stop. 2. Shift the gear from D to N (Neutral). 3. Engage the handbrake (for electronic handbrakes, pull up the button). 4. Release the foot brake but do not turn off the power (this is to confirm the car is completely stationary under the handbrake's effect, preventing the P gear from locking). 5. Continue pressing the foot brake and shift the gear from N to P (Park). 6. Release the foot brake, press the start button to turn off the power, and the parking process is complete. Note: For mechanical keys, simply turn the key back to the OFF position, turn off the power, and remove the key.
2
5
Share

What does the ECON mode in a car mean?

The ECON mode in a car stands for low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive compared to Eco mode. Sport mode: Sport mode can be used during aggressive driving. When activated, the throttle pedal becomes highly responsive, and the transmission delays shifting. The transmission only upshifts when the engine reaches the redline. In Sport mode, the engine speed is maintained around 3,000 RPM, ensuring better power response during acceleration. Activating ECON mode helps reduce fuel consumption and save energy, but it may weaken the car's power. ECON can be understood as an abbreviation for "economy." It is generally recommended to keep ECON mode on in most situations, except when high torque output is needed (e.g., climbing hills) or when driving at very high speeds, where ECON mode should be turned off. After pressing the ECON button, the car enters a low-carbon, eco-friendly driving mode. The ECU, engine, and transmission then operate in the most fuel-efficient way to intelligently execute the driver's intentions, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal hard, the ECON system effectively controls the opening and closing of the intake valves to ensure stable engine operation and energy savings. Although ECON mode is simple and effective, it may not work under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the car exceeds the economical speed range (usually between 60-90 km/h), ECON mode will not save fuel. The key to ECON mode is its reliance on the car's computer for independent operation while driving. Therefore, it does not function during idle stops or when the car is in N, P, or manual mode.
14
1
Share

How to Solve the Problem of Loud Noise During Cold Start?

First, warm up the engine to ensure all components are fully lubricated before driving, which can effectively prevent wear and tear on engine parts. Alternatively, wait for a few minutes after starting the engine. The noise will subside as the engine returns to normal operation.
5
5
Share

How to Use the Wipers on an Old Santana?

The wiper control for the old Santana is located below the right side of the steering wheel. Push the right lever downward for intermittent front wiper action, upward for continuous front wiper action, forward for front wiper action plus windshield washer fluid, and backward for rear wiper action plus washer fluid.
6
2
Share

How to Connect Bluetooth for Older Great Wall Models?

First, establish a pairing relationship between your mobile phone and the vehicle's Bluetooth device. Activate the Bluetooth function on both your mobile phone and the vehicle's Bluetooth device. Then search for Bluetooth devices on your phone, select the discovered device, and proceed with pairing and connection.
13
3
Share

How to Fold the Old Model Long Hao Bi?

First retract the roof, then adjust the backrest to the seating position, release the two locking hooks, and locate the folding mechanism. When folding, the front wheels will automatically retract inward; simply release the front wheel locking mechanism.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.