Where is the Vios radiator located?

2 Answers
StJames
07/29/25 4:34am
Vios radiator is located in front of the engine in the engine compartment. The car radiator generally refers to the car radiator, which belongs to the car cooling system. The radiator in the engine water cooling system consists of an inlet chamber, an outlet chamber, a main plate and a radiator core. Taking the 2021 Vios as an example, it is a compact car with a body size of 4435mm in length, 1700mm in width, 1490mm in height, and a wheelbase of 2550mm. The 2021 Vios has a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 110ps, a maximum torque of 138nm, and a maximum power of 81kw, matched with a 5-speed manual transmission.
Was this review help?
12
4
Share
DiViolet
08/12/25 8:16am
I've been driving a Vios for several years. The radiator is located at the front of the car under the hood. When you open the hood, you can immediately see the large square container near the grille. The position is designed to ensure airflow cools the engine during high-speed driving. Be careful not to open it when the engine is hot during routine maintenance to avoid burns. Regularly check the coolant level, keeping it between the MIN and MAX lines, and use suitable antifreeze to prevent pipe blockages. When locating the radiator, pay attention to the hose connections. Clean any leaks or dirt promptly to prevent engine overheating and malfunctions, especially paying attention to cooling efficiency in summer. In short, the position is fixed, and daily attention can extend the car's lifespan and ensure safe driving.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the difference between driving with glasses and without glasses?

There is actually not much difference between driving with glasses and without glasses, as long as you pay attention to safety. Here are some driving precautions: 1. Slow down and observe when turning: Develop the habit of slowing down and observing the situation in the non-motorized vehicle lane and pedestrian lane when turning (especially when intersecting with them). Proceed slowly, which applies both in urban and rural areas. Actively yield to electric bikes in the non-motorized lane and pedestrians on the sidewalk. When making a right turn in the city, give way to pedestrians and electric bikes on the crosswalk and proceed slowly only after confirming there is no risk of accidents. 2. Slow down and look left and right at intersections: Develop the habit of looking left and right (while slowing down) when approaching an intersection, regardless of whether there is a traffic light or if your lane has a green light. Observe the traffic on the cross street and proceed only after confirming there are no vehicles rushing through. Also, be mindful of electric bikes, as their small size makes them easy to overlook.
13
3
Share

Does Wearing Contact Lenses Affect Driving Practice?

Wearing glasses or not actually makes little difference. Here are some driving precautions: 1. Slow down and observe when turning: Develop the habit of slowing down significantly when making turns (especially at intersections with bicycle lanes or pedestrian crossings)! Carefully observe the situation in bicycle lanes and pedestrian crossings, then proceed slowly. This applies to both urban and suburban driving. Actively yield to electric bikes in bicycle lanes and pedestrians on sidewalks. When making right turns in urban areas, give way to pedestrians and electric bikes at crosswalks, only proceeding slowly after confirming no potential hazards. 2. Slow down and look both ways at intersections: Cultivate the habit of looking left and right (while slowing down) when approaching intersections, regardless of traffic lights or whether your lane has a green light. Observe the traffic situation on the crossing roads, only accelerating through the intersection after confirming no vehicles are running red lights (also watch out for electric bikes as their small size makes them easy to overlook).
13
2
Share

What are the requirements for the third-phase traffic duty station?

The main task is to assist police officers in guiding citizens to comply with traffic regulations. For example, dissuading non-motor vehicles from running red lights, stopping beyond the line, going against traffic, or driving in non-designated lanes; discouraging pedestrians from running red lights or not using sidewalks. Stages: The three-hour persuasion activity is divided into three stages. In the first stage, trainees are required to stand at the intersection for one hour. The second stage allows trainees to rest and learn basic traffic knowledge. In the third stage, trainees continue to stand at the intersection for another hour. They must wear reflective vests uniformly, hold a small yellow triangular flag labeled "Traffic Persuader," and carry a whistle, directing on-site traffic under the command of traffic police. Duty Station: If a trainee leaves the post without approval from a police officer or auxiliary police, fails to dress as required or carry persuasion equipment, performs duties carelessly, or finds someone to substitute for the persuasion activity, they will be deemed as failing. The trainee must redo the duty station until they pass.
13
0
Share

What Causes the Handbrake of a Sedan to Fail to Hold?

Introduction to the reasons why the handbrake fails to hold: 1. Braking effect: The ABS activates, but the car still shows no obvious braking effect, and the braking distance significantly increases. 2. ABS not activated: The wheels do not lock up, the ABS does not activate, and the car rolls forward. The first issue likely stems from the tires, possibly due to severe tire wear, leading to a reduced static friction coefficient, which makes the tires prone to locking up and causes the ABS to intervene too early, failing to generate effective braking force and compromising safety. Solution: 1. Replace the tires: It is recommended to switch to a slightly larger tire size for a significantly improved braking effect. The second issue likely originates from the braking system itself. 2. Replace the brake pads: If a noticeable friction sound is heard during braking, it indicates severely worn brake pads that should be replaced immediately. If no sound is heard, the issue may lie with a malfunctioning brake pump, preventing the brake piston from working effectively. In such cases, it is advisable to promptly visit a repair shop to service the brake assembly.
15
2
Share

Will points be deducted if the two sides of the reverse parking are not equally wide?

As long as the mirrors are not outside the line, no points will be deducted. Here is the relevant introduction about reverse parking: 1. Technique: Align the mirror and turn right fully. When starting the first reverse parking, observe the positional relationship between the left rearview mirror and the parking line. First, turn the steering wheel half a turn to the right and start moving. When the left rearview mirror covers the parking line, turn the steering wheel fully to the right; while reversing with the steering wheel fully turned to the right, look at the right rearview mirror. Observe the distance between the car body and the right front corner of the parking space, keeping this distance at 30 centimeters. If it is too narrow, adjust the steering wheel. The standard width of the parking space line is 15 centimeters, so in the rearview mirror, it should appear as roughly two parking space line widths. 2. Precautions: Generally, start in 1st gear and do not shift incorrectly. When controlling the speed, turning the steering wheel as quickly as possible is always better. When these two conflict, prioritize controlling the speed.
13
5
Share

What Causes the Popping Sound in the Engine Compartment at Idle?

Excessive carbon deposits in the combustion chamber not only increase the compression ratio (resulting in high pressure) but also create high-temperature hot spots on the carbon deposit surfaces, leading to engine knocking. Below is an introduction to car idling: 1. The Role of Car Idling: Idling is a working condition of a car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle size, among other methods. Idling means the engine is "exerting force without doing work." When the engine is running, if the accelerator pedal is completely released, the engine enters the idling state. 2. Causes of Unstable Idling: Direct causes refer to mechanical parts being dirty, worn, or incorrectly installed, leading to variations in cylinder power output, which results in an imbalance of power among cylinders and causes unstable idling. Indirect causes refer to abnormalities in the engine's electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance the power output among cylinders and causing unstable idling.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.