Where is the Vios fuse box located?

1 Answers
DeAlexa
07/29/25 2:54pm
Toyota Vios is a classic family car, the fuse box is located on the driver's side, under the front windshield on the dashboard. The large plastic panel can be opened by pulling it backward. If it doesn't open, you can use a screwdriver to pry it. The fuse box is an overcurrent protection switch, mainly used to control the working electricity of the circuit. The fuse box is the central nervous system of the car, responsible for transmitting driving information to various parts of the vehicle, and is a key component in the car's electronic control system. Classification of fuse boxes: According to the type of fuse installed, they can be divided into fuse tube boxes and fuse strip boxes. By the size of the fuse, they can be divided into large fuse boxes, medium fuse boxes, and small fuse boxes. By material, they can be divided into plastic fuse boxes and bakelite fuse boxes. By environmental standards, they can be divided into eco-friendly fuse boxes and non-eco-friendly fuse boxes. By installation method, they can be divided into lead-type fuse boxes, circuit board-type fuse boxes, and instrument panel-mounted fuse boxes. Toyota Vios is a family entry-level model specifically designed and developed by Toyota for the Asian market. The body dimensions are 4435mm*1700mm*1490mm, with a fuel tank capacity of 42L. The transmission options include CVT continuously variable transmission (simulating 8 gears) and a 5-speed manual transmission, with NEDC combined fuel consumption of 4.8-5.1L/100km. The manual transmission has a top speed of 190km/h, while the automatic transmission has a top speed of 180km/h. The engine is equipped with a 5NR-FE naturally aspirated engine, with the automatic transmission version having a maximum power of 82kw and maximum torque of 139nm. The manual transmission version has a maximum power of 81kw and maximum torque of 138nm.
Was this review help?
5
2
Share
More Forum Discussions

How to Distinguish Between Two-Wheel Drive and Four-Wheel Drive?

Distinguishing between two-wheel drive and four-wheel drive: If only two wheels have driving capability, it is two-wheel drive; if all four wheels have driving capability, it is four-wheel drive. The most obvious difference between the two is power, with four-wheel drive being significantly more powerful than two-wheel drive. Two-wheel drive can be categorized into front-engine rear-wheel drive, front-engine front-wheel drive, rear-engine front-wheel drive, and rear-engine rear-wheel drive. Four-wheel drive includes full-time four-wheel drive, on-demand four-wheel drive, and part-time four-wheel drive. Two-wheel drive offers higher flexibility and lower fuel consumption, while four-wheel drive provides better performance at any time but consumes more fuel. In two-wheel drive vehicles, the differential allows the left and right drive wheels to rotate at different speeds, whereas in four-wheel drive, a center differential is required to adjust the speed difference between the front and rear wheels.
16
5
Share

How to Determine if Car Engine Oil Has Deteriorated?

Methods to determine if car engine oil has deteriorated: 1. Check the color: Normal engine oil should be yellowish-brown and semi-transparent. Once water enters, it turns brown. After running for a while, the oil will gradually become milky white and produce some foam. As the oil is used for an extended period, it will carry sludge and metal shavings, turning black. When the oil becomes a shiny black color, it indicates that it needs to be replaced. 2. Method of observing the color: When checking the oil color, do so under sunlight or in a well-lit area. You can use a dedicated inspection stick or the oil dipstick to dip a small amount of oil and observe it against the light. If no metal shavings are visible in the oil, it can continue to be used. If there are excessive impurities like metal shavings, the oil has deteriorated and should no longer be used. 3. Smell the odor: Normal engine oil has a mild, slightly aromatic smell. If the oil emits a particularly pungent odor, it has deteriorated, and you should carefully inspect whether it needs immediate replacement.
2
0
Share

Why is the BMW 730 one-button start not responding?

BMW 730 one-button start not responding reasons are as follows: Key reasons: For example, the key battery is dead, or the key's radio waves are being interfered with. If you frequently place the car key near electronic devices such as mobile phones, computers, or TVs, it can easily cause interference with the key's low-intensity radio waves, making it difficult for the car's sensor to detect the key. In this case, the one-button start will not respond. Solution: Try replacing the key battery first. Gear not in P position: Most car models today cannot start if the gear is not in P position. This is a safety feature designed by manufacturers to prevent starting the car when the gear is in D or R position. Solution: Shift the gear to P position and try starting again. Brake not pressed: Many cars' one-button start requires pressing the brake to start the engine. If the brake is not pressed, it only connects the car's electrical circuits, which is also a safety feature. Solution: Press the brake while starting. Car itself problems: If the issue is related to the car itself, the scope of possible causes is broader. It is recommended to visit a 4S shop for inspection.
1
4
Share

What are the causes of idle vibration in an Audi A5?

Audi A5 idle vibration causes and solutions: Ignition system issues: If there is a malfunction in the car's ignition system, it can lead to poor ignition system performance, improper spark plug firing, and other problems, resulting in unstable idle vibration. Solution: Check the condition of the spark plugs, high-voltage wires, and ignition coils to see if there is excessive carbon buildup on the spark plugs. If found, clean or replace the spark plugs immediately. Poor fuel quality: Poor fuel quality can damage engine performance, leading to idle vibration issues. Solution: Clean the car's throttle body promptly, which can generally resolve common faults. Excessive carbon buildup or aging in the engine: Excessive carbon buildup inside the engine can cause the gasoline sprayed by the cold start injector to be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start and causing unstable oil pressure. Solution: Check the oil pressure and replace components if necessary.
2
3
Share

What to Do When the Engine Idle Speed is Unstable and Fluctuates?

Here are the specific methods to deal with unstable idle speed that fluctuates and lacks acceleration power: 1. The correct idle speed of an electronic fuel injection engine is ensured by the electronic idle speed control valve. The ECU adjusts the idle speed control valve based on signals such as engine speed, temperature, throttle switch, and air conditioning. 2. When the idle speed is lower than the set value, the computer commands the idle speed control valve to open the intake bypass channel or directly increase the throttle opening to increase the intake air volume, thereby raising the engine idle speed. 3. When the idle speed is higher than the set value, the computer commands the idle speed control valve to close the intake bypass channel, reducing the intake air volume and lowering the engine speed. Due to oil contamination, carbon deposits causing sluggish or stuck movement of the idle speed control valve, or the throttle not closing properly, the ECU cannot correctly adjust the engine idle speed, leading to unstable idle speed. 4. Diagnostic method: Check the operation sound of the idle speed control valve. If there is no sound, the idle speed control valve is faulty. Troubleshooting involves cleaning or replacing the idle speed control valve and using a dedicated decoder to perform a basic setting of the idle speed.
12
2
Share

Will the vehicle be impounded if the inspection expires?

Will the vehicle be impounded if the inspection expires? The vehicle will be impounded if the inspection expires. Below is relevant information about vehicle inspection: 1. Relevant laws: Article 49 of the Regulations on the Registration of Motor Vehicles stipulates that the owner of a motor vehicle may apply for an inspection compliance mark from the vehicle management office at the place of registration within three months before the expiration of the motor vehicle inspection validity period. 2. Consequences of overdue motor vehicle inspection: If a motor vehicle continues to be driven on the road without undergoing inspection after the expiration date, it may be seized by the traffic police department, and the owner may face a fine of 200 yuan and a deduction of 3 points. If a motor vehicle fails to obtain an inspection compliance mark within three consecutive inspection cycles, it will be subject to mandatory scrapping. Additionally, failure to undergo inspection on time may result in fines due to the inability to provide a valid inspection certificate, and in the event of a traffic accident, the insurance company may refuse to compensate.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.