···
Log in / Register

Where is the VIN stamping located on the Haval H8?

4 Answers
DelCameron
07/29/25 8:45am
The VIN stamping on the Haval H8 is located under the front passenger seat. The Great Wall Haval H8 is a model produced by the Great Wall Group, representing the first luxury SUV to enter the mid-to-high-end market with comprehensive upgrades in platform, powertrain, design, and configuration services. The vehicle dimensions are 4806*1975*1794 mm, with a wheelbase of 2915 mm. Below is an introduction to Haval: Sales: As of September 2019, its flagship model, the Haval H6, achieved the top SUV sales position for 76 consecutive months. As the successor to the Great Wall Safe, Haval plays a connecting role in Great Wall's SUV product lineup. H-Series Products: The H-series includes the Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, and Haval H9.
Was this review help?
1
0
Share
McDeclan
08/12/25 6:43am
I've been driving a Haval H8 for almost three years. The VIN (Vehicle Identification Number) is usually located at the lower right corner of the windshield—visible from the outside when you sit in the driver's seat, printed clearly in the corner of the glass. Additionally, if you open the driver's side door and look down at the door sill (the step area), there's also a stamped metal plate with the VIN. This number is crucial, especially when buying a car, as it's the unique identifier. If it gets lost or altered, it can cause issues with insurance and ownership transfer. During routine maintenance, I always wipe the area around the stamped VIN with a damp cloth to prevent dust buildup that might obscure it. If rust or heavy grime appears, clean it promptly. Before long trips, I always take a quick glance to ensure everything's in order—this avoids potential trouble if information is needed on the road. A clear VIN is especially important when selling a used car to prevent disputes. By the way, the vehicle manual also specifies its location, and there might be a backup in the spare tire compartment. Checking multiple spots never hurts.
Was this review help?
16
5
Share
Expand All
MacAlaina
10/05/25 8:13am
During car repairs, I've seen many Haval H8s. The VIN stamp is mainly located on the inner side of the lower left corner of the windshield, near the edge, and is easier to identify in good lighting. Open the door and check the driver's side sill, the lower part of the door frame, where the number is often engraved. Open the engine compartment, and you'll find it printed on the front nameplate, or you can check the spare tire area in the trunk. If it's unclear, it's likely covered by dirt or rust—just use a brush or cleaner to wipe it off. Don't rush to handle it; first, confirm the correct location. If the rust is severe, you might need to visit a 4S shop for re-stamping. The VIN is crucial for anti-theft purposes, and altering it is illegal and can lead to trouble. During every inspection, I always remind owners to protect the stamp from damage by debris, as it's essential for registration and accident handling. If you can't find it, refer to the manual or vehicle registration certificate for detailed instructions—don't guess randomly.
Was this review help?
10
2
Share
Expand All
LeBeckett
11/19/25 2:57am
Shortly after driving the Haval H8, I noticed the VIN is easily found at the lower corner of the front windshield and also on the door sill when opened. It's simply a combination of numbers and letters used to identify the vehicle—don't obscure it when driving out. For a quick check, look at the glass or step area from the driver's seat; during maintenance, clean off any dirt to ensure it remains legible. Remember, the VIN is useful for safety inspections and car insurance, so keep it clear.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What brand is the manual transmission of the Chery Tiggo 8?

The transmission model of the Chery Tiggo 8 is the Aisin 6MT transmission. Transmission: A transmission is a device that changes the speed ratio and direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Transmission Maintenance: Regularly change the transmission oil. For manual transmission models, replace the transmission oil every 3 years or 60,000 kilometers. For automatic transmission models, replace the transmission oil every 4 years or 60,000-80,000 kilometers.
2
3
Share

How to adjust the time on the 7th generation Accord?

Method to adjust the time on the 7th generation Accord: 1. Press and hold the sound button after starting the vehicle; 2. Use buttons 4 and 5 to make the adjustment. The 7th generation Accord is a mid-size car under GAC Honda. Taking the 2006 base model of the 7th generation Accord as an example, its body dimensions are: length 4854mm, width 1821mm, height 1463mm, wheelbase 2738mm, and fuel tank capacity 65l. The 2006 base model of the 7th generation Accord is equipped with a 2.0l naturally aspirated engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum power speed of 6000rpm, and is paired with a 5-speed manual transmission.
10
4
Share

How to Remove the Wiper Blades on a Mercedes-Benz C200L?

The method to remove the wiper blades on a Mercedes-Benz C200L is as follows: 1. Lift the middle part of the wiper blade, press the clip to separate the wiper; 2. Pull the wiper arm to the left to remove it. The Mercedes-Benz C200L is a mid-size sedan under Beijing Benz, with body dimensions of 4783mm in length, 1810mm in width, and 1442mm in height, a wheelbase of 2920mm, and a fuel tank capacity of 66 liters. The body structure is a 4-door, 5-seater sedan. The Mercedes-Benz C200L is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum power speed of 5500rpm, paired with a 9-speed automatic transmission.
17
5
Share

What brand are the original brake discs for the BMW X3?

BMW does not use a fixed brand for its brake discs, but they are all BMW-certified original brake discs. Function of brake discs: Brake discs are used for braking, with the braking force coming from the brake caliper. Generally, most brake calipers have a fixed inner section where the brake piston pump is located, while the outer section is a clamp-style structure. Both parts press against the brake disc simultaneously, generating braking force through friction between the brake disc and the inner and outer brake pads. How to choose brake discs: Before replacing brake discs, first check whether the replacement discs are genuine parts. Verify the integrity of the product packaging, the authenticity of the anti-counterfeiting marks, and whether the packaging labels match those on the brake discs. Also, ensure the product model matches the content on the certificate.
1
1
Share

What is the method for starting an automatic transmission car after parking?

Automatic transmission car starting method after parking is: 1. Observe the surroundings to ensure safety before getting in the car, and fasten the seat belt after getting in; 2. Press the brake with your right foot and push the one-button start key; 3. Shift to D gear and release the handbrake. Automatic transmission means that the driver does not need to shift gears manually, and the vehicle will automatically select the appropriate gear according to the driving speed and traffic conditions. The automatic transmission gears are: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the forward gear, also known as the drive gear; 5. L gear is the low gear; 6. S gear is the sport mode.
15
5
Share

Does the Oxygen Sensor Need Regular Replacement?

Oxygen sensors do not require regular replacement. Under normal circumstances, as long as the vehicle is properly maintained and not subjected to aggressive driving, the oxygen sensors can last up to 100,000 kilometers without issues. Typically, there are two oxygen sensors: the front oxygen sensor and the rear oxygen sensor. The front oxygen sensor is located before the catalytic converter and is used to adjust the air-fuel mixture concentration. The rear oxygen sensor is positioned after the catalytic converter and monitors its working condition. The oxygen sensor in a car is a feedback sensor in the fuel injection engine control system. Its function is to detect the oxygen concentration in the exhaust and send feedback signals to the ECU, which then adjusts the fuel injection quantity to maintain the air-fuel ratio near the theoretical value. Common faults of oxygen sensors include: 1. Oxygen sensor poisoning, usually caused by using leaded gasoline; 2. Internal wiring breakage; 3. Heater resistance wire burnout; 4. Ceramic cracking of the oxygen sensor.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.