Where is the VIN number of the Peugeot 2008 located?

2 Answers
VonSophia
07/24/25 3:00am
The VIN number of the Peugeot 2008 is located on the metal plate under the front windshield. If you need to take a rubbing of the VIN, you will have to remove the plastic trim panel beneath the windshield. The Peugeot 2008 is a compact SUV from Peugeot, with dimensions of 4312 mm in length, 1785 mm in width, 1545 mm in height, and a wheelbase of 2612 mm. This model is equipped with a 1.2-liter turbocharged three-cylinder engine across all variants, delivering a maximum power of 100 kW and a peak torque of 230 Nm. The engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 and 3500 rpm.
Was this review help?
20
0
Share
AylaMarie
08/10/25 10:37pm
Where is the VIN number generally located on the Peugeot 2008? I have to say, as someone who frequently tinkers with cars, the primary location is definitely at the bottom of the windshield on the driver's side, near the wipers. You can clearly see that 17-digit string from outside the car through the glass. After opening the hood, there might also be a small label near the firewall or on the hood itself, which serves as a backup location. Sometimes, there's a nameplate on the inner frame of the door pillar when you open the door. I recommend that owners locate this spot when buying the car or during maintenance—don't rush to start working, as it's super important for vehicle identification—things like anti-theft, maintenance records, and insurance claims all rely on it. The location is designed to be this obvious for easy reading. I personally check it every quarter to avoid label wear or dirt affecting its use. If you find it hard to read, go to the dealership immediately to get it replaced or cleaned—don't delay your daily driving.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How many kilometers can the Outlander drive when the fuel gauge light flashes?

When the fuel warning light of the Outlander comes on, according to the car's manual, it can typically drive for 40-50 kilometers. Once the fuel warning light is illuminated, it is advisable to minimize sudden acceleration, hard braking, and turn off the air conditioning, among other energy-saving driving habits. Below are some additional details: 1. Determining whether the fuel tank has fuel is essentially the job of the fuel level sensor. If the gasoline level in the car's fuel tank is too low, below the minimum detectable level of the sensor, the fuel gauge light will come on, indicating insufficient fuel and the need to refuel as soon as possible. 2. When the fuel light is on, it can affect the car's fuel pump. The fuel pump, which is responsible for pumping fuel, generates heat during operation. When the fuel level is sufficient, the fuel pump is submerged in fuel, allowing the heat to dissipate into the fuel. 3. When the warning light is on, the fuel level is below the fuel pump, leaving the pump exposed and causing slower heat dissipation. In high-temperature summer weather, prolonged exposure to such conditions may lead to long-term overheating and potential damage to the fuel pump.
17
3
Share

How to Remove the Headlight Clips of Chery Tiggo 3?

Tiggo 3's headlight clips can be simply unclipped. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of a car. They not only affect the external image of a car owner but are also closely related to safe driving at night or under bad weather conditions. The steps for removing and installing the headlights are as follows: 1. Open the front hood of the car, locate the car bulb, and take a photo to record the installation state of the headlight. 2. Then forcefully pull out the bulb power cord with the blue coil. Inside the blue circle is the lamp base, which requires a bit of force. Directly pull it out to expose the lamp tail. The metal handle inside the red circle is the one used to release the metal clip of the bulb. 3. At this point, you can see how the power cord is pulled out. Be sure to pull out the lamp base first before releasing the metal clip handle of the bulb. 4. Press down in the direction of the blue arrow without letting go, then push to the right to loosen the car light clip. After loosening, directly pull out the bulb. 5. Next, open the box of the newly purchased bulb and install the new bulb. 6. Finally, clip the bulb clip back in place and plug in the bulb power cord to complete the installation.
8
5
Share

What procedures are required for inter-provincial vehicle relocation?

Vehicle relocation to another province requires the following procedures: 1. Vehicle inspection: Mainly to verify whether the engine and chassis numbers have been altered, whether they match the original records, and whether the vehicle is stolen. 2. Invoice: Issue a used car transaction invoice. If the vehicle is gifted by relatives or friends, no transaction invoice is required. For customs-supervised vehicles, submit the "Notice of Border License Plate Issuance for Customs-Supervised Vehicles of the People's Republic of China" issued by the supervising customs. 3. Identification: Provide the identification documents of both the transferor and the transferee, as well as documents related to the vehicle. 4. License plates: Recycle the old license plates and issue temporary ones.
17
4
Share

How to Operate a Manual Transmission When Turning?

Manual transmission turning involves the following specific steps: 1. First, pay attention to road signs and slow down early. At road and traffic intersections, there are overhead road guidance signs on one side of the road. When turning, always follow the road prompts and reduce speed as early as possible. 2. Choose the correct lane to enter the turning position based on the signs. Never change direction suddenly, and especially avoid altering your route after entering a solid line. 3. While turning, observe the road ahead and also be mindful of blind spots on both sides to stay fully aware. 4. If the speed is relatively high, you can press the clutch, apply gentle braking, shift to a lower gear, and use inertia to drive slowly. Once the speed drops to a suitable level for the gear, release the clutch pedal and resume normal driving speed.
20
2
Share

What car has a logo that looks like a T?

The car with a logo resembling the uppercase letter T is Tesla. 1. Tesla is committed to accelerating the development of sustainable transportation with the most innovative technology. Tesla Motors is the world's first electric vehicle company to adopt lithium-ion batteries, and its first electric vehicle was the Roadster. 2. Tesla provides efficient ways to achieve sustainable energy supply technologically, reducing global transportation's dependence on petroleum. Compared to fuel-powered cars, pure electric vehicles mainly differ in four major components: the drive motor, speed controller, power battery, and onboard charger. Instead of gas stations, they rely on public ultra-fast charging stations. 3. By opening patents and collaborating with other automakers, Tesla has vigorously promoted the development of pure electric vehicles worldwide. Robin Ren, Tesla's Global Vice President and China Region Head, stated in an interview with NetEase Technology that the most critical task in the China region currently is to accelerate the construction of independent after-sales service centers in core cities nationwide.
14
0
Share

Can Car Fire Extinguishers Explode?

Under normal circumstances, car fire extinguishers will not explode. However, it is important to note that excessive temperatures can cause certain components of the extinguisher to deteriorate, which may easily lead to leakage. Therefore, the storage location should avoid direct sunlight as much as possible. More details about car fire extinguishers are as follows: 1. Detail One: Car fire extinguishers should not only be placed in a cool location but also stored in an easily accessible position. This allows for quick retrieval and use in case of a car fire. 2. Detail Two: Car fire extinguishers are typically small in size, so they can be placed directly in the glove compartment or the passenger-side storage area. Of course, they can also be placed under the seat, but avoid storing them in the trunk. In the event of a rear-end collision or a fire caused by electrical failure, retrieving the extinguisher from the trunk could be very difficult.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.