Where is the VIN number of Changan CS75?

2 Answers
JohnnyRose
07/29/25 6:28am
Changan CS75's VIN number is located under the front windshield. Below is relevant information about the Changan CS75: 1. Introduction: It inherits the classic family design recognized by millions of users in terms of appearance. With spacious interiors, five-star safety standards, and powerful performance, it meets the needs of family car consumers. 2. Exterior: The internationally fashionable fluid body design captivates at first glance. Originating from Changan's global R&D platform, it reintroduces cutting-edge international design elements into the exterior styling, creating a brand-new urban SUV with contemporary aesthetics. The overall appearance is bold and rugged, with a body that exudes strength and dynamism while maintaining balance and stability. The striking front fascia, featuring a stylish large-mouth grille design, fully showcases its robust charm.
Was this review help?
19
0
Share
LaGrace
08/12/25 9:55am
After driving my Changan CS75 for a long time, I find the VIN location really easy to locate. It's mainly at the lower left corner of the windshield in front of the driver's seat. Just crouch down a bit, clean the dust at the seam between the glass and the frame, and you'll spot it. That 17-digit alphanumeric combination is like the car's ID card, containing details like the manufacturing year and the manufacturer. Besides this spot, there's an identical number on a label inside the door pillar on the passenger side. If you pop the hood, there's also a small plate near the left headlight, but the windshield location is the most visible. During routine maintenance or insurance claims, staff often ask me to point it out to save them the hassle of digging through documents. The Changan CS75's design is thoughtful here—the location is convenient, making it easy even for new owners to find it on their first try. Just remember not to let dirt cover it and check it regularly to prevent tampering—the VIN is crucial for anti-theft and transactions. I've seen a friend who overlooked the VIN when buying a car and ended up with major issues.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

When Does Turbocharging Kick In?

Turbocharging intervention is specifically related to engine displacement, with larger displacements resulting in lower intervention RPMs. The turbocharger in an engine engages at a certain RPM threshold, typically around 1000 or 1500 RPM for most vehicles. When the RPM drops below this threshold, the turbocharger disengages. This is why turbocharged engines often experience a slight lag of a few tenths of a second during acceleration, which is the time it takes for the turbo to engage. Below is relevant information about turbocharging: 1. A turbocharger can be viewed as a blower connected in series to the intake manifold. As long as the engine is running, exhaust gases drive the turbine, which in turn rotates the compressor impeller on the same shaft. At low RPMs, the turbine spins slowly, resulting in poor air compression. During this time, the intake manifold is in a state of negative pressure, and the turbine blades offer resistance to airflow rather than pressure. 2. When engine RPM increases, the turbine wheel spins faster due to exhaust gas flow, gradually increasing the thrust generated by the turbine blades. For example, after reaching 1200 RPM, this pressure exceeds the suction created by the engine pistons, causing the intake manifold to experience positive pressure as the blower continuously forces air into it. This 1200 RPM is what's known as the "intervention RPM" – essentially the positive pressure threshold of the turbocharger. Once the turbo reaches this RPM, the pressure it generates surpasses the suction created by piston intake and exhaust. This RPM is commonly referred to as the "intervention RPM." 3. The so-called intervention RPM of a turbocharger is determined based on factors such as the engine's base displacement, power requirements, and maximum cylinder pressure, achieved through the turbo's size (inertia). Smaller turbo inertia means the turbine spins up quickly with minimal exhaust gas flow, while larger turbo inertia makes it relatively more difficult for exhaust gases to increase turbine RPM.
10
2
Share

What is the normal tire pressure for the Teana?

The normal tire pressure range for the Nissan Teana is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. If you want to check the current tire pressure of your Teana during daily driving, you can activate the tire pressure monitoring system, which will display the tire pressure values on the central LCD screen of the instrument panel. The specific method is to press the square button on the left side of the steering wheel to bring up the tire pressure monitoring and display the specific tire pressure values. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of over-inflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and misalignment, reducing driving comfort; accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; increases body vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the car during driving. Hazards of under-inflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and misalignment, posing risks to driving safety; increases movement of various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to stay on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will also come on. For sensor damage issues, the only solution is to replace it with a new one.
19
5
Share

Is Chevrolet a Joint Venture Car?

Chevrolet is a joint venture car brand, and its models include Malibu, Cruze, Aveo, Sail 3, Captiva, etc. The Chevrolet Cruze has a body size of 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. The Chevrolet Cruze is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 114ps and a maximum power of 84kw, with a maximum power speed of 6600rpm. It is paired with a 6-speed manual transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
8
5
Share

How to Initialize the Window Setting?

Window initialization setting method: 1. Manually lower the window to the bottom; 2. Continuously hold the window up button to raise the window; 3. Do not release the button, after the window reaches the top, keep holding the up button for about 5 seconds before releasing. The window is an important part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of drivers and passengers. Depending on the installation position of the glass, windows can be categorized into: front and rear windshields, side windows, and door windows. Their design, structure, and quality have a significant impact on the driver's visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics.
1
1
Share

Is the Porsche Taycan a pure electric vehicle?

Porsche Taycan is purely electric. Overview: The Porsche Taycan is an electric vehicle launched by Porsche. The model originates from the Mission E concept car previously released by Porsche, and the name Taycan means a spirited young horse. Chinese name Porsche Taycan Foreign name Porsche Taycan Brand Porsche Manufacturer Porsche Appearance: The Porsche Taycan basically continues the overall design style of the Porsche Mission E concept car and adopts Porsche's family-style design elements. The model retains large air vents to ensure the cooling performance of the braking system and battery pack.
5
0
Share

Which Button to Press for Heating in Volkswagen Cars?

To turn on the heating in Volkswagen cars, use the temperature adjustment knob. Simply rotate the air conditioning temperature adjustment knob to the heating zone and adjust the fan speed. Volkswagen models include: Magotan, Sagitar, Golf, Jetta, Volkswagen CC, Bora, etc. Taking the 2020 Magotan as an example, its body dimensions are: length 4865 mm, width 1832 mm, height 1471 mm, wheelbase 2871 mm, and fuel tank capacity 66 liters. The 2020 Magotan is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.