Where is the VIN number located on the Roewe W5?

2 Answers
Shelby
07/25/25 4:15pm
Roewe W5's VIN number is located on the driver's side of the front windshield, and it can also be found on the B-pillar of either the driver's or passenger's side. The VIN is a 17-character serial number consisting of digits and letters. It serves as a unique identifier for the vehicle, containing information about the manufacturer, engine, chassis number, and other specifications. The Roewe W5 is Shanghai Automotive's first SUV model, with dimensions of 4676mm in length, 1888mm in width, and 1765mm in height, and a wheelbase of 2740mm. The vehicle features a multifunctional leather steering wheel that integrates commonly used controls such as volume adjustment, Bluetooth hands-free operation, and cruise control, providing convenience for the driver.
Was this review help?
20
1
Share
VanOmar
08/11/25 9:45pm
I've driven a Roewe W5 myself and found that the VIN is most commonly located at the bottom of the windshield. Sitting in the driver's seat, you can clearly see it engraved on the black border at the lower right corner of the glass. It's a combination of letters and numbers, similar to a car's ID number, used for identifying maintenance records. Additionally, it can be found on the door frame—specifically, after opening the driver's side door, the same number is printed on a label attached to the B-pillar. If you inspect the engine compartment, you might also find it on a small plate near the engine. The VIN is crucial to avoid mistakes in buying, selling, or insurance, so I recommend checking multiple locations to ensure consistency. Once, a colleague's car had mismatched VINs after an accident, causing a lot of trouble, so knowing how to locate it saves a lot of hassle. You can casually jot it down during daily use.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

Can I change my car's license plate in a different location?

You can change your car's license plate in a different location. The following is the procedure for changing the license plate in a different location: Handling the change procedures at the original vehicle management office: Go to the vehicle management office where the car's license plate was originally registered to handle the change procedures. (Note: The vehicle used by the owner must meet the National IV emission standard). Required materials for the procedure: the original ID card of the vehicle owner; the vehicle license, registration certificate, and the vehicle itself. Transferring the vehicle records to the new location: After completing the change procedures at the original vehicle management office, transfer the vehicle records to the vehicle management office in the new location. Required materials for the procedure: the original ID card of the vehicle owner, the vehicle records, and the vehicle itself.
18
2
Share

How to Avoid Crossing the Line in the S-Curve of Driving Test Subject 2?

Here is the relevant introduction on how to avoid crossing the line in the S-curve of Driving Test Subject 2: Position of the Car Front: When entering the S-curve, pay attention to the position of the car front and try to drive in the middle. Speed: Before entering, control your speed—avoid going too fast. It's best to maintain a consistent speed and enter at a low gear and low speed. Angle: When the left front corner of the car touches the right line, turn the steering wheel left by one full turn and 45 degrees. Keep the left front corner at a certain angle along the right line of the first curve of the S-path to prevent the car from crossing or going out of the line. Slowly complete the right line of the first curve without moving the steering wheel. When the left front corner touches the left line of the second curve, straighten the steering wheel by turning it back one full turn and 45 degrees. Then, let the car move slowly for a while.
9
4
Share

Is the 'OFF' light on or off?

"OFF" being illuminated means it is off. Below is a detailed introduction to common car buttons: 1. "ON" means on. On the car light lever, there are ON and OFF, where ON means on and OFF means off. 2. The "SEL" button is a menu selection confirmation button, usually found on the multifunction steering wheel. The "OK" button has the exact same function as "SEL," but some cars use "SEL" while others use "OK." 3. The "A/C" button is the compressor switch, short for Air-Condition, which is the air conditioning cooling switch. 4. "VOL+/-" are the volume adjustment buttons, where VOL is the abbreviation for "volume," used to adjust the car audio's volume. 5. "MUTE" is the mute button, allowing for one-touch muting. 6. "MODE" is the mode switch button. 7. "SET" on the multifunction steering wheel is the cruise control function button.
8
1
Share

How to Deal with Wet Car Seat Cushion Foam?

Here are the methods to handle wet car seat cushion foam: 1. First, remove the seat cover to increase the breathability of the seat foam and prevent mold. 2. If the seat is made of fabric and the wet area is not extensive, you can use a hairdryer to heat and dry it. For leather seats, wipe the wet area clean with a dry towel, then use a high-quality leather cleaner to wipe it again and let it air dry naturally. Avoid using a hairdryer on leather to prevent deformation. 3. After drying or air-drying to a certain extent, place some desiccants on the seat surface to continue absorbing moisture from the foam. However, avoid using desiccants containing quicklime to prevent heat generation upon contact with water.
11
0
Share

How to Deal with Black Spots on White Cars?

Methods for handling black spots on white cars are as follows: 1. Remove granular dust from the car glass: Gently wipe the dust on the car glass, avoiding the use of overly wet cloths, as granular dust may cause slight scratches on the glass surface. 2. Focus on cleaning stubborn dust spots: After removing surface dust from the car glass, there are usually more stubborn spot stains, which should be wiped with a cleaning liquid. 3. Clean oil stains carefully: Oil stains on the car should be cleaned meticulously, and a dedicated oil stain cleaner can be used for this purpose.
12
2
Share

Is There a Fine for Not Wearing Seat Belts in the Back Seat?

Passengers, including those in the front and back seats, will be fined 20 yuan if they fail to wear seat belts as required. Drivers who do not wear seat belts will be fined 50 yuan, and those on highways or urban expressways will also have 2 points deducted from their license. When passing through traffic signals, drivers should slow down and yield to pedestrians and vehicles with the right of way. It's not just about wearing seat belts in the back seat—in some smaller cities, even front-seat passengers often don't realize the need to buckle up, and drivers don't remind them. I believe this poses a significant safety hazard. The issue of seat belt usage is also evident on airplanes, where many passengers ignore announcements and flight attendants' reminders. Even after repeated requests, some still refuse to comply. Many also fail to turn off electronic devices on airplanes, which is a common phenomenon. This is particularly severe in China, where safety awareness is too low. Fines are the most effective enforcement method because, for many, only the money in their hands feels like a tangible personal interest. Personally, I think people in any country are the same—human discipline is often the result of long-term constraints imposed by rules and regulations. If penalties are not strict or severe enough, all regulations become meaningless.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.