Where is the VIN number located on the Nissan Sylphy?

1 Answers
VonAnthony
07/28/25 7:01pm
The VIN number of the Nissan Sylphy can be seen on the windshield directly in front of the driver's seat. Another location is inside the engine compartment, where the number can be viewed after removing the outer cover. The VIN, known as the Vehicle Identification Number in Chinese, is a unique code assigned by the manufacturer to identify a vehicle. The VIN consists of a 17-character alphanumeric code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. The Nissan Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, and a wheelbase of 2712mm. In terms of safety features, this vehicle is equipped with front side assist safety, curtain-style assist safety, central locking, speed-sensitive auto-locking, collision-sensing auto-unlocking, rearview camera monitoring system, and rear parking sensor system.
Was this review help?
11
2
Share
More Forum Discussions

What are the reasons why a Toyota car won't start?

Detailed reasons and solutions for a Toyota car not starting are as follows: 1. Battery depletion: If the car is frequently used for short trips at low speeds, the battery voltage may drop below the rated value, preventing normal operation. Solution: Recharge the battery. 2. Fuel flow obstruction: There is no oil pressure in the engine fuel supply pipe, or the fuel line is dirty over time. In extremely low temperatures, water and debris can mix and block the fuel line, resulting in failure to start. Solution: Place the car in a warm environment or clean the fuel line. 3. Poor ignition system performance: Low intake air temperature prevents fuel from atomizing in the cylinder. Combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the car from starting. Solution: Remove the spark plugs and clean the oil stains between the electrodes.
15
3
Share

How many years can a Toyota Vios normally last?

Toyota Vios can normally last for fifteen years. The following is an introduction about the Toyota Vios: 1. Exterior: The new Vios has undergone significant changes in its appearance. The headlights are designed to be slimmer and connected to the front chrome strip, featuring a large-mouth grille. The taillights have also been redesigned to be slimmer compared to the old model, giving the car a more dynamic feel. 2. Configuration: The Vios is equipped with a domestically produced 16-valve 5A-FE engine, which is almost identical to the commonly used 8A engine in China, except for an increased piston stroke. The displacement has been increased from 1.3 liters to 1.5 liters, and the corresponding maximum power has also been increased to 68kw.
19
2
Share

What does it mean when Skoda detects a pressure loss?

Detecting tire pressure loss means that a certain tire is underinflated. Here are the relevant explanations: 1. Underinflation: Tires are a very important component of a car. If the tire pressure is insufficient, it should be inflated immediately. When the tire pressure is too low, the increased contact area between the tire tread and the ground leads to higher rolling resistance, resulting in increased fuel consumption. Additionally, the wear on the tire tread will abnormally concentrate on both sides. 2. Extended information: The vehicle can still be driven when pressure loss is detected. The tire pressure monitoring system will only alert the driver when the tire pressure drops to the minimum pressure limit.
20
2
Share

Can a Used Car Be Transferred Along with Its License Plate?

Buying a used car does not allow for the transfer of the license plate along with it. If the original license plate meets the usage period requirement, it can be retained under the original owner's name for use when purchasing a new car. If the conditions are not met or the owner relinquishes the original license plate, the vehicle management office will reclaim it, and the new owner will need to select a new license plate. Conditions under which a vehicle cannot be transferred include: 1. Vehicles without compulsory traffic insurance cannot be transferred; 2. Vehicles that have been modified, altered, or had their cargo weight or passenger capacity changed without approval; 3. The applicant cannot act as an agent for the original owner to complete the transfer procedures; 4. Vehicles with unresolved traffic violations, accidents, or those under investigation by authorities; 5. Vehicles that have not undergone regular inspections or have failed inspections; 6. Smuggled, customs-supervised, or stolen vehicles cannot be transferred; 7. Vehicles under court-ordered freeze or with unresolved mortgages; 8. Commercial vehicles converted to non-commercial use that have reached the scrap age or will reach it within one year; 9. Used cars being relocated in or out that do not meet local standards.
15
4
Share

Why does the Civic need system initialization after power loss?

Because the vehicle has an onboard computer, the stored memory information is lost after power loss, requiring initialization. Below are relevant explanations: 1. Causes of power loss: GPS-induced power loss (recommend inspecting GPS at installation location if suspected). Faulty wiring or poor grounding of anti-theft devices. Forgetting to turn off lights or other electrical equipment after parking, resulting in battery drain. 2. Additional information: Precautions for new Civic models after power loss: Before parking and turning off the engine, users should first deactivate all electronic devices in the vehicle, such as radios, headlights, and other electrical equipment.
17
4
Share

Why are the lights still on after locking the Sagitar?

If the taillights remain on after the car is turned off, it may indicate a faulty brake switch. Here are the relevant explanations: 1. When the brake switch is faulty: The owner can replace the brake light switch themselves. Alternatively, they can seek treatment at a professional repair shop. If it's not the car's brake light switch, it could be a fault in the car's circuit. 2. Extended information: The main function of the AUTO feature is to eliminate the need for the driver to manually turn on the headlights. The vehicle will use the exterior light brightness sensor to determine whether the headlights need to be activated for illumination. In most cases, the activation of the 'leave home' function occurs when pressing the unlock button on the remote key at night with the light switch in the AUTO position, causing the headlights to automatically turn on. The 'come home' function is activated by turning off the ignition switch and operating the headlight flasher to illuminate the headlights for a period of time to provide lighting for the user.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.