Where is the VIN number located on the Mercedes-Benz ML350?

What is the maximum ground clearance of the Peugeot 4008?

The minimum ground clearance of the Peugeot 4008 is 210mm, and its maximum wading depth is 350mm. The minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the horizontal ground when the car is parked on a level surface under full load. A larger minimum ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain but raises the center of gravity, reducing stability. Conversely, a smaller minimum ground clearance weakens the vehicle's ability to traverse obstacles or rough surfaces but lowers the center of gravity, improving stability. The dimensions of the Dongfeng Peugeot 4008 are 4510mm in length, 1850mm in width, 1662mm in height, with a wheelbase of 2730mm.

19

2

Share

What are the consequences of a car lacking coolant?

If a car lacks coolant, the engine temperature will become excessively high, which can easily lead to engine damage. The proper functioning of the vehicle's cooling system is essential for ensuring the normal operation of the engine, and any faults related to the coolant system should not be overlooked. It is crucial to replenish the coolant promptly if it is missing. Prolonged lack of coolant can result in poor heat dissipation in the cooling system, causing the engine to overheat. In severe cases, this can lead to cylinder head deformation, piston scuffing, and even engine failure. It is normal for the coolant level to fluctuate within a certain range due to temperature changes. However, if the coolant is no longer visible in the reservoir, immediate attention is required. If the coolant level drops again after being replenished to the normal mark, this indicates a coolant leak, and immediate repairs are necessary.

2

0

Share

What are the models of excavators?

Excavators come in models such as 35, 60, 120, 160, 200, 220, etc. Overview: Excavators, colloquially known as "hook machines" in some regions and also referred to as diggers or earthmovers, are versatile machines capable of forward and backward movement, rotation, lifting, lowering, digging, hydraulic hammering, and suction. They are used to scoop materials above or below the machine's level and load them into transport vehicles or dump them at stockyards. Equipment Structure: Common excavator structures include the power unit, working equipment, slewing mechanism, control mechanism, transmission mechanism, undercarriage, and auxiliary facilities. Externally, an excavator consists of three main parts: the working equipment, the upper revolving platform, and the undercarriage.

17

0

Share

What maintenance does a car need at 100,000 kilometers?

At 100,000 kilometers, a car requires the following maintenance: replacement of engine oil and oil filter, brake fluid, coolant, brake pads, air and cabin air filters, spark plugs, tires, battery, shock absorbers, power steering fluid, etc. These components need comprehensive inspection to determine whether maintenance, cleaning, or replacement is required. Car maintenance, also known as vehicle servicing, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. It mainly includes maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, and extend the service life.

16

2

Share

What are the 7 steps to start driving a manual transmission car?

Manual transmission car starting involves 7 steps: 1. Press the clutch pedal; 2. Push the gear lever inward with your right hand, then shift up into 1st gear; 3. Turn on the left turn signal; 4. Sound the horn; 5. Release the handbrake; 6. Maintain steady throttle; 7. Gradually lift the clutch pedal. A manual transmission, also known as a stick shift, requires manually moving the gear lever to change the gear engagement mechanism inside the transmission, altering the gear ratio to achieve speed variation. The working principle involves using shift forks to change the transmission ratio or gear ratio of meshing gears, thereby modifying driving torque to suit different operating conditions. The gear lever can only be moved when the clutch pedal is depressed.

4

5

Share

What causes the brake noise in poloplus?

poloplus brake noise causes: 1. If it's a squeal, first check if the brake pads are nearly worn out (the wear indicator is making noise). 2. If they are new brake pads, see if the brake disc has grooves, as localized friction can cause noise. If the brake disc is fine, consider whether the brake pads are too hard or if the noise-reducing shims were installed incorrectly. Also check for any foreign objects caught between the brake disc and pads. 3. If it's a dull noise, it might be an issue with the brake caliper, such as worn sliding pins or detached spring clips. 4. If it's a hissing sound, there could be multiple issues—problems with the caliper, brake disc, or brake pads. 5. If the noise persists, check for brake drag. Poor caliper retraction can cause prolonged friction between the disc and pads, leading to noise under certain conditions.

5

3

Share

Where is the VIN number located on the Mercedes-Benz ML350?

What is the maximum ground clearance of the Peugeot 4008?

What are the consequences of a car lacking coolant?

What are the models of excavators?

What maintenance does a car need at 100,000 kilometers?

What are the 7 steps to start driving a manual transmission car?

What causes the brake noise in poloplus?

Can I apply window film after installing ETC?

Is the Hyundai Verna water pump reversed?

What is the displacement of the Aston Martin DB11?

What Causes the Power Steering Light to Illuminate?