Where is the VIN number located on the Chery E3?

2 Answers
McIris
07/28/25 6:54pm
The VIN number of the Chery E3 is located on the crossbeam under the front passenger seat. You need to lift the carpet to see it. If floor mats are installed, you will need to cut them open to access the VIN. Below is some relevant information about the Chery E3: 1. In terms of appearance, similar to the Chery E5, the Chery E3 also features a trapezoidal grille with three horizontal chrome bars. The headlight design is quite similar to that of the Chery E5, but the E3's headlights are more refined, with chrome separators between the light functions and chrome eyebrow elements above. It is equipped with a projector-style low-beam headlight assembly. 2. The bumper design is also quite similar, with a wide lower grille. The Chery E3 integrates the central grille with the fog light frames on both sides. Additionally, there are plans to introduce a vertical waterfall-style grille option, indicating that Chery is no longer rigidly adhering to a fixed family design language. 3. On the side profile, the Chery E3 features relatively straight lines with an upward sweep at the C-pillar. The rear end remains similar to the E5, with taillight clusters positioned on both sides of the body. The rear license plate frame is placed on the rear bumper, and the trunk lid is more minimalist in design.
Was this review help?
3
0
Share
DeMatthew
08/12/25 12:18am
As an experienced driver who frequently drives, locating the VIN (Vehicle Identification Number) of the Chery E3 is actually quite simple. It is usually positioned at the lower left corner of the windshield. From outside the car, just bend down and look toward the base of the windshield near the driver's side—the sequence of numbers will be clearly visible, designed for convenience. The VIN is like the car's ID number, essential for buying/selling vehicles or insurance claims. I remember carefully checking it when helping a friend buy a car to avoid purchasing a problematic vehicle. Besides this primary location, you might find a backup version on a sticker attached to the firewall in front of the engine after opening the hood. During routine maintenance or when cleaning the windshield, avoid scrubbing that area too hard to prevent wearing off the numbers. The registration certificate or vehicle license also carries a printed record for easy cross-verification, saving unnecessary trips. In short, familiarizing yourself with its location ensures smoother daily use and handling of car-related matters.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What to Do When the Car Throttle Is Unstable?

The solutions for an unstable car throttle are as follows: 1. First, learn to control the pressure on the throttle pedal. Avoid pressing the throttle too deeply at once and do not release it too quickly after pressing. The key to maintaining a stable throttle is to ensure a gentle and smooth pressure—press and release lightly. 2. Maintain a correct posture when pressing the throttle. Before driving, position the heel of your right foot between the throttle and brake pedals to find a pivot point. Then, use your toes to check if you can reach both the throttle and brake pedals without moving your heel. If you can, this is the correct posture.
16
1
Share

What to Do When Car Tires Are Frozen in Ice?

Solutions for car tires frozen in ice are as follows: 1. The simplest method when car tires are frozen is to prepare hot water: It's important to note that the water temperature should not be too high, as excessively hot water can cause significant damage to the vehicle's tires. While using warm water, you can also add salt to the water to accelerate the melting of the ice. 2. Another method is to use a car inverter: You need to plug the inverter's electrical connector into the cigarette lighter socket. After starting the vehicle, ensure that the battery has sufficient power. Once the inverter starts working, insert a hairdryer into the inverter to melt the ice.
16
2
Share

Is it necessary to repair a damaged road bike inner tube?

Road bike inner tube damage requires inspection at a repair shop. If the damaged area is small, it can continue to be used after repair. If the damage is extensive, the tire needs to be replaced. The following describes situations where the tire cannot be repaired: Sidewall damage: The sidewall is the weakest part of the tire. Damage here increases the risk of a blowout and is also difficult to repair, so it is not recommended to patch it. Replacement is the best option. Excessively large puncture diameter: Foreign research institutions have issued technical specifications for tires based on their characteristics. One of the points roughly states that if the puncture diameter exceeds 1/4 inch (6.35 mm), repairing it will affect the tire's main safety structure, which is the cord layer between the tread and the base, meaning there is no need for repair. How to handle a punctured car tire: If you feel your car tire is punctured while driving, you should pull over immediately to check the tire. If the tire pressure drops sharply and you cannot continue driving, replace it with a spare tire and drive to the nearest repair shop. If the leak is slow, you can use a car air pump to replenish the tire pressure and then drive at low speed to the repair shop. Never continue using the tire under extremely low pressure, as it poses a significant safety hazard, can further damage the tire, and even harm the wheel rim.
2
4
Share

What does it mean when the cruise light is on?

cruise is the car's electronic cruise control system, mainly composed of four parts: command switch, sensor, cruise control system ECU, and throttle actuator. The light being on indicates that the cruise control is activated. More details are as follows: 1. Meaning: The CRUISEMAIN light on the dashboard is the cruise control switch indicator. 2. Function: When the green CRUISEMAIN indicator light on the dashboard is on, it means the cruise control switch has been turned on. Additional information: For safety reasons, do not use the cruise control system in heavy traffic, on slippery roads such as rain, ice, or snow, or during severe weather conditions like strong winds and heavy rain. To prevent accidental activation of the cruise control system, always ensure the cruise control switch is turned off when not in use.
13
4
Share

In winter, should the heater be set to recirculate or fresh air mode?

In winter, whether to use recirculation or fresh air mode for the car heater depends on the actual situation. The details are as follows: 1. If you want to quickly heat up the car interior in winter, you can first start the engine, drive normally for a while to warm up, wait until the temperature gauge pointer reaches the middle position, then turn on the heater in recirculation mode. Using recirculation mode allows the air conditioning to quickly cool down or heat up the car interior; this not only quickly warms up the car but also does not burden the engine and is more fuel-efficient. 2. However, although continuous recirculation keeps the car warm, the interior forms a relatively sealed environment where people can easily become oxygen-deprived over time. Therefore, it is best to switch to fresh air mode every hour to draw in fresh air from outside, which then passes through the air conditioning evaporator or heater core to blow cold or warm air respectively.
17
1
Share

Which is Better, Front-Wheel Drive or Rear-Wheel Drive?

The differences between front-wheel drive and rear-wheel drive are as follows: Engine: Rear-wheel drive vehicles mostly adopt a longitudinal engine layout, which occupies more space and significantly compresses rear passenger space. Front-wheel drive vehicles use a transverse engine layout, freeing up more space, and there is no protruding drive shaft in the cabin, thus noticeably improving rear passenger comfort. Handling: Front-wheel drive vehicles require the front wheels to handle both steering and driving, placing a greater burden on them. Rear-wheel drive vehicles, due to the heavier rear axle and greater inertia, are more prone to oversteer. Front-wheel drive vehicles offer higher stability, while rear-wheel drive vehicles provide more driving fun. Fuel Consumption: Rear-wheel drive vehicles have a drive shaft and an additional differential, leading to power loss efficiency, making them more fuel-consuming than front-wheel drive vehicles. Regarding front-wheel drive and rear-wheel drive, it is recommended that users choose based on their own needs.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.