Where is the VIN number located on a Ford Mondeo?

1 Answers
MacArcher
07/29/25 7:10pm
The VIN (Vehicle Identification Number) of a Ford Mondeo is located on the nameplate at the front of the engine, under the hood. Generally, the VIN can be found in the lower left corner of the windshield, on the driver's side door hinge pillar, door lock pillar, or door edge, or sometimes in the engine compartment. The exact location may vary depending on the vehicle model. Relevant information about the VIN is as follows: 1. Introduction: The VIN, also known as the chassis number, is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. 2. Note: To avoid confusion with the numbers 1, 0, and 9, the letters "I," "O," and "Q" are not used. Additionally, the 10th character (representing the model year) does not use "I," "O," "Q," "U," "Z," or "0."
Was this review help?
5
2
Share
More Forum Discussions

How to activate autopilot in Model 3?

To activate autopilot in Model 3, follow these main steps: 1. First, meet three conditions: vehicle speed must exceed 30 KM/H, gray lane lines must be displayed on the instrument panel LCD screen, and both hands must be on the steering wheel. 2. Push the cruise control lever once to activate "Traffic-Aware Cruise Control". 3. Push the cruise control lever twice consecutively to enable the autopilot function. Here is some additional information: After activating autopilot, the cruise control icon and autopilot icon on the screen will turn blue, and the gray lane lines will also light up in the same blue color. At this point, the vehicle will begin autonomous driving. Once autopilot is engaged, the vehicle will automatically drive on the current road, adjusting cruise control speed and following distance based on actual road conditions to ensure safe driving.
20
1
Share

What is the winter range of the Neta V?

The Neta V achieves a winter range of up to 360km. This vehicle features an advanced battery management system and a reliable, unique suspension design. Advanced Battery Management System: Typically, the range of new energy vehicles significantly decreases during winter. However, the Neta V demonstrates excellent real-world range performance, primarily due to its advanced battery management technology. This technology ensures the battery operates within an optimal temperature range of 15-45 degrees, maximizing the vehicle's driving range. Reliable and Unique Suspension Design: In addition to its impressive powertrain configuration, the Neta V also boasts a distinctive chassis suspension design. All models are equipped with a front MacPherson strut independent suspension and a rear trailing arm non-independent suspension. The vehicle structure utilizes a unibody design, making this suspension setup particularly noteworthy.
2
4
Share

What is the original tire brand for the Focus?

The original tire model for the Focus is 205/60R16. The maintenance of tires mainly requires the following methods: 1. Increase awareness of tire safety. Regularly inspect tires, especially before driving on highways. Conduct thorough and detailed checks, including not only tire pressure but also observing whether there are cracks on the sidewalls and the wear condition of the tread. Address any potential hazards promptly. 2. Regularly correct wheel balance. Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, dynamic balance testing and adjustment should be performed. The dynamic balance test value for a single side of the tire should be less than or equal to 40 grams. 3. Regularly rotate tires. To ensure even wear on all tires of the same vehicle, rotate the tires every 5,000 kilometers and perform a four-wheel alignment every 5,000 to 10,000 kilometers to avoid abnormal excessive wear. It is not allowed to install tires of different models or with significant differences in wear on the same axle.
15
0
Share

Where is the chassis number of the Freelander 2 located?

The chassis number of the Land Rover Freelander 2 is located near the spare tire in the trunk, specifically below the rear seats where you can reach in to feel it. Here is more information about the chassis number: 1. The chassis number is the Vehicle Identification Number (VIN) found on the vehicle's registration certificate. The VIN is a 17-character code composed of letters and numbers, also known as the 17-digit identification code, chassis number, or 17-digit number. 2. The combination and arrangement of the vehicle identification code ensure that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for the vehicle, hence it can be referred to as the 'car's ID card.' 3. The chassis number follows specific rules. Illegal characters include O, Q, I, and 0. The letter Z is invalid in the year position. The ninth character can only be a digit from 0 to 9 or the uppercase letter X. The following four digits must all be numbers and cannot be letters.
13
4
Share

Can the Haval H9 be modified with -13 offset wheels?

No, there are significant differences between positive offset wheels and negative offset wheels. Positive offset wheels: Since the wheel mounting surface faces outward, the tire's force application point is biased toward the outer side of the wheel center point, providing a more reasonable balance in terms of load capacity and traction (for soft-axle vehicles). The most important point is that positive offset wheels can be partially concealed within the vehicle's suspension components, serving a protective function against impacts. Negative offset wheels: The advantages are their attractive and imposing appearance, as well as improved stability. However, they tend to throw more mud and increase suspension impact forces. You can first determine the original wheel's ET value. Then measure the distance between the original wheel's outer side and the fender. If you want a more aggressive look, you can decide to move the wheels outward. This way, you can change from positive offset to negative offset.
11
4
Share

Which is more fuel-efficient, normal mode or eco mode?

eco mode is relatively more fuel-efficient. The relevant information about normal mode and eco mode is as follows: Concept of normal mode: Normal mode is the standard driving mode, which is the ordinary mode when driving a car. Normal mode is suitable for urban driving. When the car is in normal mode, the car's transmission and throttle will be in a relatively balanced state, making the occupants more comfortable. Concept of eco mode: Eco mode is the economical mode. When the vehicle is in this mode, the throttle response becomes more sluggish, the transmission shifts more proactively, and the engine speed is maintained in a relatively low range, thereby achieving the goal of fuel efficiency. Difference between normal mode and eco mode: There is a difference in energy consumption. Eco mode operates in a low-energy and environmentally friendly state, while normal mode operates in a standard power consumption state, with normal mode consuming more energy than eco mode.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.