Where is the VIN number located on a Camry?

1 Answers
StAdriana
07/29/25 5:56pm
The VIN number of a Camry is located under the front passenger seat. Here is some knowledge about the Camry: 1. Introduction: The newly redesigned eighth-generation Camry has recently been officially launched. The Camry 2.0L is equipped with a new TNGA powertrain, and a Camry Hybrid Sport version has been added. All models come with additional and upgraded advanced features while maintaining the same price. The redesigned eighth-generation Camry offers three powertrain options: TNGA-2.5L-HEV, TNGA-2.5L, and TNGA-2.0L, including ten models across the Luxury, Sport, and Hybrid series, all of which meet the "China VI" emission standards. 2. Exterior: In terms of appearance, the eighth-generation Camry features dual styling designs for the Luxury and Sport versions, both inspired by Toyota's latest "Keen-Look" design language. The Luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture and lower waistline. The extended rear roof enhances rear headroom.
Was this review help?
19
2
Share
More Forum Discussions

What are the reasons for the Passat starter not responding?

The main reasons for the Passat starter not responding are the following: 1. First, check the circuit to see if the spark plug is firing normally and if there is any leakage. 2. Check if the high-voltage wire has a high-voltage spark, and if the ignition coil is functioning properly. 3. It may be caused by poor contact of the starter solenoid coil. Below is an introduction to car starting: 1. Walk around the back of the car to the driver's side window and then get in. 2. Fasten the seatbelt. Adjust the driver's seat and check if the instruments, rearview mirror, wipers, etc., are working properly. 3. Start the ignition, press the clutch, and shift into first gear. 4. Turn on the left turn signal. Honk the horn to alert pedestrians and vehicles in front and behind. 5. Release the handbrake. 6. Release the clutch and gently press the accelerator to start moving toward the left lane. 7. After entering the normal traffic lane, turn off the turn signal.
6
1
Share

How to align the timing belt of a 474 engine?

474 engine timing belt alignment method: 1. Align the crankshaft according to the marks on the crankshaft timing pulley, generally requiring the No. 1 cylinder piston to be at top dead center position; 2. Install the camshaft, align the marks on the timing pulley with the camshaft, and align the dual camshafts to their respective positions; 3. Install the timing belt or chain. The 474 engine refers to a 4-cylinder engine with a cylinder bore of 74mm. The timing belt is an important component of the engine's valve system, ensuring accurate intake and exhaust timing through its connection with the crankshaft and a specific transmission ratio. The reason for using a belt instead of gears for transmission is that belts produce less noise, have smaller variations, and are easier to compensate for. The lifespan of a belt is certainly shorter than that of metal gears, so it is necessary to replace the belt regularly.
5
1
Share

What is the difference between the Big G and the Little G?

Mercedes-Benz Big G features an extra-long and wide body, 22-inch oversized tires, a ground clearance of 450mm, and an overall height of 2.25 meters, which is nearly 30 centimeters taller than the G636*6. The Big G incorporates a significant amount of carbon fiber trim, and the door panels are adorned with microfiber material, complementing each other, while the Little G uses rosewood as decoration. Below is relevant information: Powertrain: The Mercedes-Benz Big G is equipped with a 4.0T V8 twin-turbocharged engine, delivering a maximum horsepower of 421, and the transmission system features a 9-speed automatic transmission along with the 4MATIC all-wheel-drive system, representing a comprehensive upgrade compared to the Little G. Exterior: The Mercedes-Benz G-Class is one of the world's most capable all-terrain off-road vehicles, with clean and distinct lines that outline the rugged character expected of an off-roader, while also embodying the unique luxury and classic elegance of the Mercedes-Benz family.
10
2
Share

How to Remove the Cabin Air Filter in a Honda CR-V?

To remove the cabin air filter in a Honda CR-V, follow these steps: 1. Open the glove box, then locate a hook at the lower right corner. Press it downward gently with your index finger to release it. 2. The glove box is not yet fully detached at this point. Use both hands to press the edges of the glove box inward gently to squeeze it. 3. Once the glove box is removed, you will see the protective cover of the cabin air filter. 4. Press the clips on both sides with your hands to remove the protective cover. Below is some additional information about the cabin air filter: The cabin air filter purifies the air entering the vehicle from the outside, improving air cleanliness. It typically filters out impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. The purpose of the cabin air filter is to prevent these substances from entering the air conditioning system, thereby protecting the system and providing a clean air environment for passengers. It also helps maintain the health of the occupants and prevents windshield fogging. Regular replacement is necessary.
7
4
Share

Is the Wuling Hongguang Mini equipped with lithium iron phosphate batteries?

Wuling Hongguang Mini uses lithium iron phosphate batteries. A lithium iron phosphate battery is a type of lithium-ion battery that utilizes lithium iron phosphate as the cathode material and carbon as the anode material. It has a nominal voltage of 3.2V per cell, with a charging cutoff voltage ranging from 3.6V to 3.65V. Lithium iron phosphate batteries offer advantages such as high operating voltage, high energy density, long cycle life, excellent safety performance, low self-discharge rate, and no memory effect. The Wuling Hongguang Mini is a pure electric microcar under SAIC-GM-Wuling. Taking the Hongguang Mini EV 2021 Macaron Fashion Edition as an example, it measures 2920mm in length, 1493mm in width, and 1621mm in height, with a wheelbase of 1940mm. The body adopts a 3-door, 4-seat hatchback structure, with a curb weight of 665kg and a minimum ground clearance of 125mm.
4
5
Share

Where is the auxiliary battery of the Mercedes-Benz C200 located?

The auxiliary battery of the Mercedes-Benz C200 is located under the floor of the trunk. Here are five steps to locate the auxiliary battery: 1. Open the driver's side door of the Mercedes-Benz C200. 2. Engage the handbrake of the Mercedes-Benz C200. 3. Pull the trunk release switch located on the left side of the driver's leg area. 4. Lift the trunk of the Mercedes-Benz C200 upwards to open it. 5. Lift the floor to find the auxiliary battery. Below is some additional information about the battery: For every 1°C increase in ambient temperature, the battery's capacity increases by 0.8%; conversely, for every 1°C decrease in ambient temperature, the battery's capacity decreases by 0.8%. When the temperature drops to -10°C, the battery's capacity is only 72% of its normal value; at -20°C, the capacity drops to 64%. Additionally, car batteries are shallow-cycle lead-acid batteries, and over-discharging can cause significant damage to the battery. The vehicle's main battery can also be found in the engine compartment at the indicated location.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.