···
Log in / Register

Where is the VIN located on GAC Mitsubishi vehicles?

4 Answers
DelVera
07/29/25 10:56pm

GAC Mitsubishi VIN can be found on the strip below the windshield in front of the driver, mostly in the lower left corner. It is also indicated on the vehicle's registration certificate, where the VIN column in new certificates usually prints this number. VIN introduction: The VIN is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. Engine number introduction: The engine number is an identification code assigned by the engine manufacturer according to regulations, industry practices, and engine attributes, representing information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine.

Was this review help?
2
2
Share
BethanyLynn
08/16/25 12:37am

When it comes to the location of GAC Mitsubishi's VIN (Vehicle Identification Number), I've driven several of their models and found it most commonly in three places: First, the lower right corner of the windshield, specifically the outer edge on the driver's side. Just crouch down and you'll easily spot the VIN etched on the glass. Second, open the driver's side door, and you'll find a metal plate with the VIN printed on it, either on the B-pillar or the door frame interior. Third, under the hood, the VIN can also be found stamped near the engine or on the firewall area. The VIN is a 17-character alphanumeric code used to identify the vehicle model, year, and origin—essential for tasks like repairs or insurance claims. It's advisable to jot it down or take a photo for your phone to avoid scrambling during emergencies. When cleaning the windshield, be careful not to scrub the code area too hard. While the location is standardized, dirt buildup might occasionally obscure visibility—just gently wipe with a damp cloth in such cases.

Was this review help?
17
2
Share
Expand All
ONora
10/18/25 5:45am

I've been driving the GAC Mitsubishi ASX for several years and have explored the VIN location multiple times. The primary spot is at the lower left corner of the windshield near the driver's seat, clearly visible when viewed from outside the car. There's duplicate information on the label inside the door pillar when you open the front left door, serving as a backup in case of wear. Another alternative is the plate near the engine under the hood, though I don't check there often. The VIN is crucial for verifying information during used car transactions or accident handling to avoid fraud. I recommend new car owners check its location right after purchase—unlike me who once forgot to record the VIN and wasted half a day during repairs. It's usually not an issue, but comes in handy during annual inspections.

Was this review help?
3
2
Share
Expand All
DaniellaFitz
12/01/25 6:25am

GAC Mitsubishi VIN Location in Three Simple Steps: First, check the lower right corner of the windshield from the outside; then open the left front door to inspect the door frame label; finally, examine the area near the engine in the engine compartment. The VIN is used for vehicle registration or emergency identification—ensure the numbers are clear and take a photo for backup. If you can't find it, refer to the user manual.

Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the reason why the Mercedes-Benz does not move in D gear?

Reasons why the Mercedes-Benz does not move in D gear: Functional comprehensive failure: When the car does not move after shifting gears, it is a functional comprehensive failure involving the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first. You can start by checking the condition of the two wheels. Starting in gear, the drive shaft does not rotate: If the car does not move when starting in a certain gear and the drive shaft does not rotate, it indicates that the fault is in the transmission. Remove the transmission cover and inspect whether the transmission shift fork is broken or whether the guide block fixing screws are loose. Here are the related content introductions: Gear shifting experiment: If the above checks are normal, proceed with the gear shifting experiment. If the second shaft does not rotate in a certain gear, it means the half-round key of that gear's gear is cut off. If the second shaft rotates in direct gear but does not rotate in other gears, it indicates that the support bearings at both ends of the intermediate shaft are disassembled and the intermediate shaft has fallen.
20
4
Share

What gear should be used when going uphill in Subject 1?

When going uphill in Subject 1, you should shift to a lower gear and press the accelerator pedal. Below are some key points to note when driving uphill: 1. Key points for climbing the slope: If the road is flat before the uphill section, you can appropriately increase the speed when traffic conditions allow, using the inertia generated by high-speed driving to climb the slope. The climbing distance can last up to several 10,000mm. 2. Key points for shifting gears: After climbing the slope for a certain distance, the vehicle may start to lose power, and the engine will show obvious lack of power. This is the right time to downshift. At this point, you should quickly and accurately shift to a lower gear, usually second gear is more suitable. When shifting gears, ensure the action is swift and accurate without hesitation. Inaccurate or delayed shifting can easily cause the vehicle to stall or roll backward. Therefore, the gear shift must be successful in one attempt. 3. Key points for accelerating: After shifting gears, the throttle should be quickly applied because the resistance to the vehicle's forward movement is already quite significant, and the required power should correspondingly increase. Only a low gear and high throttle can ensure sufficient climbing power. 4. Key points for speed: The speed should be low and steady. If the slope continues for hundreds or even thousands of meters, maintain a low gear and high throttle to climb the slope at a consistent speed. Stay in the gear where the engine operates normally until reaching the top of the slope, avoiding sudden speed changes or frequent gear shifts.
4
2
Share

Does the Honda Inspire have an underbody guard?

The Honda Inspire does not come with an underbody guard. Functions of the underbody guard: The primary functions of an underbody guard are to protect against impacts, rust, and corrosion. While driving, road debris such as flying stones and gravel can strike and scrape the car's underbody, causing damage. The underbody guard effectively shields against such impacts, protecting the underbody. In humid climates, the underbody is prone to water accumulation and corrosion, leading to rust and damage. The underbody guard covers exposed metal, forming a protective layer that isolates it from external elements. Additionally, much of the noise heard inside the car while driving comes from the underbody, and the underbody guard can help reduce noise. Advantages of the underbody guard: Protection against corrosion, stone impacts, vibrations, heat insulation, noise reduction, lower maintenance costs, and prevention of underbody scraping. Installation method for the car underbody guard: The installation involves lifting the vehicle, aligning the guard with the mounting points, and securing it with screws. Adding an underbody guard can reduce the risk of underbody damage from scrapes and impacts. It also prevents the intrusion of mud and sand, effectively protecting the engine. Furthermore, it guards against rain, snow, and acidic water, preventing premature aging, corrosion, and rust of the engine or related underbody components.
1
5
Share

What to Do If Your Car Has a Flat Tire in the Middle of the Night?

If your car has a flat tire in the middle of the night and you don't know how to change the spare tire, you can park the car in a safe area, turn on the hazard lights, and use a jack to lift the flat tire while waiting for assistance. Call a 24-hour roadside assistance service, but note that the cost will include both the tire repair fee and the towing or service fee. Below are the functions of a tire pressure monitoring system: 1. Prevent Accidents: The tire pressure monitoring system is a type of active safety device that alerts the driver in time when there are signs of danger in the tires, allowing them to take appropriate measures and avoid serious accidents. 2. Extend Tire Lifespan: With a tire pressure monitoring system, you can ensure that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage and extending their lifespan. Studies show that driving with underinflated tires reduces tire life by 15% when the pressure is 10% below the normal value. 3. Improve Fuel Efficiency: When tire pressure is too low, the contact area between the tire and the road increases, leading to higher friction resistance. If the tire pressure is 30% below the standard value, fuel consumption can increase by 10%. 4. Reduce Suspension System Wear: Overinflated tires reduce the tire's own shock absorption effect, increasing the burden on the vehicle's suspension system. Long-term use under such conditions can cause significant damage to the engine chassis and suspension system. Uneven tire pressure can also lead to braking deviation, further increasing wear on the suspension system.
11
5
Share

What Causes the Sunroof Leakage in Audi A1?

Car sunroofs are prone to leakage due to the following reasons: Maintenance Timing: Prolonged lack of maintenance can cause the sunroof sealing strips to age; Driving Conditions: Driving on bumpy roads with the sunroof fully open can lead to excessive vibration between the sunroof and the sliding rails, causing component deformation; Drainage Pipe: Clogged drainage pipes. Methods to address sunroof leakage include: Replacing Seals: Replace the sunroof sealing strips; Cleaning the Sunroof: Remove small sand particles and dust from the sunroof drainage channels. Maintenance methods for car sunroofs are: Regular Inspection: Periodically check the condition of the sunroof rails to ensure they are functioning properly; Reduce Usage Frequency: Minimize the frequency of sunroof usage; Timely Inspection: Before the rainy season, check the drainage status of the sunroof to ensure it is normal.
1
2
Share

What is the emission standard of the 2013 Buick Excelle?

2013 Buick Excelle meets the China IV emission standard. The 2013 Buick Excelle is a compact car with the following dimensions: length 4515mm, width 1725mm, height 1445mm, wheelbase 2600mm, minimum ground clearance 125mm, and curb weight 1210kg. It features a MacPherson strut front suspension and a twin-link independent rear suspension. Powered by a 1.5L naturally aspirated engine, it delivers a maximum horsepower of 113PS, peak torque of 141Nm, and maximum power output of 83kW, paired with a 5-speed manual transmission.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.