Where is the VIN located on Dongfeng Fengxing vehicles?

1 Answers
ElianaMarie
07/24/25 8:18am
The Vehicle Identification Number (VIN) for Dongfeng Fengxing vehicles is located in the engine compartment, on the components connected to the main body of the vehicle. Depending on the design of different models, it may also be found on the floor beneath the front passenger seat. The functions of the VIN: Confirming vehicle identity: Especially in special circumstances, the VIN can accurately identify your vehicle, saving time. Due to the uniqueness of the VIN, it can better confirm the vehicle. Violation query: Owners need to input the VIN to check for traffic violations. Precise parts search: If the owner is unclear about the part number, they can search by entering the VIN. Many after-sales personnel operate in this manner. Composition of the VIN: The VIN is a 17-character serial number, consisting of uppercase English letters and numbers. These 17 characters can be divided into three parts: the first part is the WMI—World Manufacturer Identifier (positions 1-3); the second part is the VDS—Vehicle Descriptor Section (positions 4-9); and the third part is the VIS—Vehicle Indicator Section (positions 10-17).
Was this review help?
18
2
Share
More Forum Discussions

What is the speed range for gear shifting in Subject Three?

1. The timing for shifting from first gear to second gear is 15~20 km/h; the timing for shifting from second gear to third gear is 25~30 km/h; the timing for shifting from third gear to fourth gear is 35~40 km/h; the timing for shifting from fourth gear to fifth gear is 45~50 km/h. Below are the related introductions: 1. Content of Subject Three: preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, driving at night, etc. 2. Content of the safe and civilized driving knowledge test: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling.
18
1
Share

What brand of motorcycle is Regnancy?

Regnancy is the Recadi brand of motorcycles. Here is some knowledge about Recadi: 1. Introduction: Recadi motorcycles are a domestic brand. The Recadi RX3 is powered by a V-twin engine, giving the cruiser a more flamboyant style. The Recadi RX7 is equipped with a CFMoto 650cc parallel-twin engine, and its configuration adopts the currently mainstream combination of floating disc brakes and ABS, ensuring the vehicle's safety performance. The Recadi RX3 and RX7 come with standard sport semi-slick tires of 200 and 240 widths respectively, enhancing their sporty cruiser temperament. 2. Badao Series: The Badao series features an adjustable rear trailing arm structure, which not only offers flexible handling but also ensures high-speed stability. The two-stage short-distance frame and the load-bearing rear fender design also provide more room for customization.
14
4
Share

What are the new regulations for A2 license annual inspection in 2020?

2020 new regulations for A2 driver's license annual inspection: For holders of various large passenger vehicles, medium passenger vehicles, large trucks (A1, A2, B1, B2) licenses or school bus staff, the annual inspection frequency has been changed from once every two years to once every year. For those who had their A1, A2, B1, or B2 licenses inspected before May 1, 2017, the next inspection date will be postponed by one year, and the original 2-year inspection validity period is automatically abolished. Annual inspection considerations: During the annual inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the light circuit and bulbs for aging, and replace relevant components if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual inspection to pass the test.
4
3
Share

Is it good to perform the first car maintenance too early?

It is better to perform the first car maintenance as early as possible. Here is the relevant introduction about the first car maintenance: 1. Explanation: Because the quality of the engine oil used in China is not very good, it needs to be replaced in a relatively short cycle. The gasoline is mainly catalytic cracking gasoline, which has a high olefin content and is prone to carbon deposits and gum formation at the fuel injectors and intake valves, resulting in poor engine performance. To ensure that the vehicle does not develop problems in a short time, the mileage for the first maintenance is shortened to eliminate faults in advance. 2. Precautions: The quality of the engine determines the mileage for the first maintenance. The maintenance cycles vary greatly among different car series and brands. Different brands of vehicles are equipped with engines of different designs. Some engines have better materials and higher precision, so the wear is relatively less. Some cars have higher requirements for engine oil, or even special requirements. Therefore, brand cars generally need corresponding original factory engine oil for lubrication.
15
2
Share

What does the exit line mean?

It refers to the innermost line at the back of the garage, specifically the line behind the rear of the vehicle body, not the lines on either side of the vehicle. Detailed explanations are as follows: 1. Reversing into a garage: Reversing into a garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle within a designated area. Reversing into a garage is a key assessment point in the driver's test, which involves correctly backing the vehicle into the garage from both sides while in motion. 2. Parking methods: There are three most common types of reversing. The first is the 'non'-shaped reversing into a garage, commonly seen in large shopping malls. The second is the roadside 'one'-shaped reversing into a garage, often referred to as parallel parking. The third is the less common diagonal reversing into a garage. 70% of accompanying driving students find parallel parking more challenging.
10
0
Share

Is It Necessary to Install a Stabilizer Bar?

Whether it is necessary to install a stabilizer bar depends on the vehicle model. Below are the relevant explanations: 1. Function of the stabilizer bar: When the horizontal heights of the left and right wheels differ, the stabilizer bar prevents torsion of the bar body and generates anti-roll resistance to suppress body roll. In other words, the stabilizer bar does not function when the left and right suspensions move up and down synchronously; it only comes into play when the left and right suspensions move asynchronously due to road undulations or cornering. 2. Reasons for installation: The stabilizer bar eliminates the impact of vibrations caused by uneven ground on the vehicle body. The vehicle body absorbs a large portion of external vibrations through the independent suspension system. Since the springs of the shock absorbers are independent and it is difficult to maintain uniformity in the material and physical properties of each spring, the residual vibrations are ultimately absorbed by the vehicle body.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.