Where is the VIN located on a Mercedes-Benz B180?

1 Answers
OEli
07/30/25 9:44am
The VIN of a Mercedes-Benz B180 is located on the nameplate at the front of the engine. You need to open the hood to see it. To do this, open the driver's door and pull the hood release lever located on the left side near the driver's leg area. Lift the hood upwards and secure it with the support rod, ensuring it is firmly in place to avoid any hazards during the process. VIN Introduction: The Vehicle Identification Number (VIN) is a unique 17-character alphanumeric code assigned to each vehicle. It identifies the manufacturer, engine, chassis number, and other specifications of the car. To avoid confusion with the numbers 1, 0, and 9, the letters "I", "O", and "Q" are not used. Additionally, the 10th character, which represents the model year, does not use "I", "O", "Q", "U", "Z", or "0". VIN Structure: There are two main formats for VINs. The first is the ISO 3779 standard adopted by the European Union. The second standard is primarily used in North America and is more stringent than the first, though both formats remain compatible with each other.
Was this review help?
7
0
Share
More Forum Discussions

How to manually reset the maintenance light on a Cayenne?

The method to manually reset the maintenance light on a Cayenne is: 1. Turn the ignition switch to the ON position, immediately press the A button twice, then turn the ignition switch to the OFF position; 2. Turn the ignition switch to the ON position again, press and hold the A button for 10 seconds, after which the new maintenance interval will appear on the display, accompanied by an audible signal; 3. Release the A button, then turn the ignition switch to the OFF position, next press and hold the mileage reset button on the instrument panel, turn the key to the ON position, at this time the instrument panel will display "service rest", press the ENTER button on the wiper switch to complete the reset. The Cayenne is an SUV model from Porsche, with body dimensions of 4846mm in length, 1939mm in width, 1705mm in height, and a wheelbase of 2895mm. The Cayenne features a 5-seat design, with door panels, seats, steering wheel, and gear shift lever all wrapped in genuine leather, and comes with aluminum-white interior panels, a 3-ring instrument cluster, independently adjustable front seat climate control, a multifunction steering wheel, and other configurations.
18
3
Share

How to reset the maintenance mileage of Leopaard CS10?

Steps to reset the maintenance mileage of Leopaard CS10: 1. Turn on the ignition switch; 2. Press and hold the SET button until the driving menu appears on the display; 3. Select the "Other Settings" option and press the SET button to enter; 4. The third item in the menu is the maintenance mileage reset, select this option, which will be in a grayed-out state; 5. Press and hold both the SET button and the TRIP button simultaneously until the maintenance mileage reset option is highlighted and becomes adjustable; 6. Press the SET button, and the dashboard will display a confirmation page for maintenance reset; 7. Press the SET button again to confirm. The Leopaard CS10 is the flagship model of Leopaard Motors in the new urban SUV segment, with a body length, width, and height of 4719mm, 1875mm, and 1700mm respectively, and a wheelbase of 2700mm.
5
3
Share

Which country does Everus belong to?

Everus is a Chinese brand. As one of the two major brands under GAC Honda, Everus products share the same technology, quality, and services as existing GAC Honda products, adhering to the principles of "synchronous technology, identical quality, and unified service network." Everus auto parts are developed based on the needs of Chinese consumers and strictly follow GAC Honda's technical standards and requirements for domestic suppliers, ensuring that the functional quality of components matches that of GAC Honda. As a brand independently developed by GAC Honda, Everus inherits the corporate culture of both Honda and GAC Honda, delivering joyful, stylish, and dynamic premium lifestyles to customers through its products.
4
4
Share

How to reset the tire pressure warning light on the 10th generation Accord?

To reset the tire pressure warning light on the 10th generation Accord: Start the vehicle: After the vehicle runs stably, check if the tire pressure light on the dashboard is on. If it is, identify which wheel is affected and inflate it promptly. After inflating the tire, reset the detection: After inflation is complete, manually reset the system. You can find the settings on the car's central console, then recheck the tire pressure. If normal, proceed to the reset phase or the light will turn off directly. Regularly monitoring tire pressure can prevent breakdowns due to unperformed self-checks. 10th generation Accord: The 10th generation Accord has a length of 4893mm, width of 1862mm, height of 1449mm, and a wheelbase of 2830mm. The front track is 1600mm, and the rear track is 1610mm, with a fuel tank capacity of 56L. The maximum power output is 143 kW at 5500 rpm, and the maximum torque is 260 Nm. The top speed is 190 km/h. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
11
0
Share

How to Isolate Car Noise?

Car noise cannot be completely isolated, but it can be reduced through reasonable methods. The methods to reduce car noise are as follows: 1. Install soundproofing cotton in the engine When the engine starts running, the internal components generate significant noise during operation. These sounds enter the car through the hood, windshield, and dashboard, forming noise. Since the source (the engine) cannot be altered, noise reduction must focus on the transmission path. Installing soundproofing cotton under the hood helps absorb some of the noise using sound-absorbing materials while reducing hood vibrations, thereby lowering noise levels. 2. Clean debris from tire treads: Car tires are one of the primary sources of interior noise. When driving, friction between the tires and the road produces various subtle sounds, especially during braking or on gravelly roads, where the noise becomes more noticeable. The most convenient solution is to replace the tires with noise-reducing ones. However, if the owner prefers not to change the tires, regular inspections can help. Removing stones and debris stuck between the tire treads prevents noise caused by stones colliding with the road surface while driving, achieving a quieter ride.
14
3
Share

What is the process and timeline for obtaining a driver's license?

The sequence for obtaining a driver's license is to complete Subject 1, Subject 2, Subject 3, and Subject 4 in order. You can only proceed to the next subject after passing the previous one. The examination schedule is generally determined by the local authorities. Below is a detailed introduction to the driver's license examination process: 1. Choose a driving school: Select a legally qualified driving school and a reputable instructor, considering all aspects comprehensively. 2. Start learning: Subjects 1 and 4 are theoretical studies. Subjects 2 and 3 require practical driving training under the guidance of a driving instructor. 3. Schedule the exam: Generally, students should study one subject at a time and take the corresponding exam. Currently, most provinces and cities in China implement a "time-based learning" system. Before scheduling an exam for a single subject, the corresponding study hours must be completed. 4. Receive the driver's license: After passing Subject 4, the examination process is completed. The relevant authorities need time to prepare the license, so there may be a waiting period before you can receive it.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.