Where is the VIN located on a GAC Honda vehicle?

1 Answers
Janet
07/30/25 4:20am
GAC Honda VIN locations: Below the front windshield on the driver's side, on the vehicle registration certificate, on the insurance policy, and on various nameplates in the engine compartment. VIN structure: There are mainly two formats for Vehicle Identification Numbers. The first is the ISO 3779 standard adopted by the European Union, while the second standard is primarily used in North America, which is more stringent than the first but remains compatible with it. VIN plate locations: The plate should be affixed to the door hinge pillar, door lock pillar, or one of the door edge pillars that connects with the door lock pillar, near the driver's seating position. If such locations are unavailable, it should be fixed on the left side of the dashboard. If that is also not possible, it should be placed on the inner side of the door near the driver's seat. If none of these positions are feasible, a written application must be submitted to NHTSA.
Was this review help?
11
2
Share
More Forum Discussions

What causes the lack of power when accelerating in Haval H6 Coupe?

The reasons for the lack of power when accelerating in Haval H6 Coupe are as follows: Ignition system malfunction: For example, aging ignition coils or spark plugs that have not been replaced for a long time can lead to insufficient ignition energy, poor combustion, weak engine acceleration, and the engine malfunction light turning on. Fuel system malfunction: System failure causing low pressure and insufficient fuel injection, resulting in weak engine acceleration. Excessive engine carbon deposits: Leading to poor fuel atomization, which also causes poor combustion, excessive exhaust emissions, and weak engine acceleration. Engine system malfunction: Causing the engine to enter emergency operation mode, thereby limiting engine power output and resulting in weak acceleration. Examples include engine sensor failures such as oxygen sensors, air flow meters, crankshaft position sensors, knock sensors, etc. Signal faults from these sensors can cause the engine to enter emergency operation mode, leading to weak acceleration.
1
5
Share

How often should the Volkswagen DQ200 transmission fluid be changed?

Volkswagen DQ200 transmission fluid is recommended to be changed every 50,000 to 80,000 kilometers. Generally, the replacement cycle for transmission fluid is calculated the same way as the vehicle's maintenance cycle, based on either mileage or usage time. If the vehicle's manual specifies both criteria, the one that comes first should be followed. When to change the transmission fluid: If the driver noticeably experiences increased gear shifting hesitation while driving, it is time to change the transmission fluid. Precautions for changing transmission fluid: During the replacement process, it is crucial to note that transmission fluids of different brands and specifications cannot be mixed. This means if one type of transmission fluid was used previously, the same brand and specification must be used for subsequent changes. If switching to a different brand of transmission fluid, the original fluid must be completely drained before adding the new brand to avoid significant impact on the transmission.
6
1
Share

How much engine oil should be added to the Benben mini?

The Benben mini requires 3.5 liters of engine oil. The Benben uses 5W-30 oil, where 5W-30 refers to the SAE standard viscosity value of this oil. Measurement method when adding oil: Using the oil dipstick that comes with the Chang'an Benben mini as a measuring tool (located next to the engine), pull out the dipstick, wipe off any attached oil with a cloth, reinsert it, and pull it out again. Observe the dipstick's scale marks: there are two round holes, the upper one indicating the maximum oil level limit and the lower one indicating the minimum oil level limit. The oil level should be between these two holes, not exceeding the upper limit. Precautions when adding oil: When changing the engine oil, the oil filter should also be replaced. During the oil filling process, frequently check the dipstick to avoid overfilling. Any excess oil can be kept for daily checks and used as a supplement when oil is low.
7
3
Share

The Correct Method to Activate Car Heater

The correct steps to activate car heater are as follows: 1. After starting the vehicle, warm up the engine first, open windows briefly before turning on the heater. 2. Set the air circulation mode to internal recirculation, which allows rapid cabin warming and prevents external polluted air from entering during smoggy days. 3. Switch the AC to warm air mode (note: do not press the AC button as it activates cooling function - engaging it during heating will only increase fuel consumption), adjust appropriate fan speed and airflow direction. 4. Once cabin temperature rises, change the circulation mode to external intake to maintain relatively fresh air inside.
20
0
Share

What is the wheel size of the Geely Xingrui?

Geely Xingrui wheel diameter is 16 inches, which converts to 406.3 millimeters in metric. Xingrui tire specifications: The tire specification for Xingrui is 215/60R16. The meaning of this tire specification is as follows: 215 refers to the tire's section width of 275 millimeters, 60 indicates that the aspect ratio (the ratio of the tire's height to its width) is 60%, and R denotes that it is a radial tire (as opposed to a bias-ply tire). Tire usage precautions: For tread scratches, it is necessary to check the depth of the scratch. If only the outer surface rubber is scratched and the cord layer is not exposed or damaged, including the steel belt layer, there is no need to replace the tire. If the cord layer is damaged, there is a risk of bulging. If the steel belt layer is exposed to mud and water, there is a risk of delamination. From a safety perspective, it is recommended to replace the tire.
3
0
Share

Where to Find the Trunk Switch on a BMW 3 Series?

Here are the methods to open the trunk of a BMW 3 Series: 1. Remote Key Control (Outside the Vehicle) This is the most common method for most car owners to open the trunk. The method is quite simple: just press the trunk opening button on the car key. Some models may not have a dedicated trunk opening button on the remote key, in which case pressing the unlock button will also release the trunk lock. 2. Opening Control Switch (Inside the Vehicle) The above method involves opening the trunk from outside the vehicle. In fact, the trunk can also be opened from inside the car. Most models on the market are equipped with a trunk opening button. The location of this button varies depending on the manufacturer and model. Generally, it can be found either to the left of the steering wheel or in the central control area.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.