Where is the VIN located on a Dongfeng Nissan vehicle?

2 Answers
IvanLynn
07/28/25 11:53pm
The VIN (Vehicle Identification Number) on a Dongfeng Nissan vehicle is located at the lower left corner of the driver's side windshield. Below is additional information: Introduction to VIN: The VIN is the vehicle identification code, determined according to national vehicle management standards. It contains information about the vehicle's manufacturer, year, model, body type and code, engine code, assembly location, etc. Decoding the VIN: Correctly interpreting the VIN is crucial for identifying the vehicle model and performing accurate diagnosis and maintenance. The VIN consists of 17 characters: Positions 1-3 (WMI): Manufacturer, brand and type; Position 2: Automaker code; Position 3: Vehicle type code; Positions 4-8 (VDS): Vehicle characteristics; Position 9: Check digit; Position 10: Model year; Position 11: Assembly plant; Positions 12-17: Serial number.
Was this review help?
10
4
Share
DiJake
08/12/25 4:12am
When driving a Dongfeng Nissan vehicle, I always need to locate the VIN (Vehicle Identification Number) for maintenance. This number is like the car's ID card and is usually quite visible. It's typically found at the lower left corner of the windshield, on the driver's side—just lean close to the window, and you'll see a line of small characters. Another common location is the label on the B-pillar after opening the door; just gently pull the door, and you'll find the number printed there. Inside the engine bay, there's also a metal plate on the firewall displaying the VIN—don't worry if it's covered in dust. When buying or transferring ownership of a car, this number is essential for checking historical fault records. Once when I sold my old car, the buyer carefully checked the number on the windshield corner to verify authenticity. If the number gets scratched, don't panic—it's also recorded in the vehicle's documents as a backup.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

How to Replace the Wiper Blades on a Sagitar?

The method to replace the wiper blades on a Sagitar: Turn the ignition key back to turn off the vehicle, then press the wiper switch downward once, and the wipers will automatically pop up to the maintenance position. Press the square plastic piece on the wiper connector to pull out the wiper blade. Insert the new wiper blade in the correct direction. The wiper, also known as a windscreen wiper, is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. The body dimensions of the Sagitar are 4655mm in length, 1780mm in width, and 1453mm in height, with a wheelbase of 2651mm.
19
0
Share

How to Replace the Air Filter for BYD S7?

The air filter for BYD S7 is located on the right side of the engine compartment, and you only need to open the outer cover to replace it. The car's air filter, also known as the air cleaner, primarily filters the air entering the cylinders, mainly removing dust and sand particles. If the air entering the cylinders contains impurities, it can accelerate the wear of the piston group and cylinders, and in severe cases, may even cause serious cylinder scoring. Normally, the air filter should be replaced every 10,000 kilometers, unless you are in an area with severe air pollution, where it may need to be replaced earlier. The body dimensions of the BYD S7 are 4840mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2735mm.
16
0
Share

Is the AC button in the car for cold or hot air?

The AC button in the car is the cooling switch of the car's air conditioning system. Pressing the AC button activates the cooling function, so AC provides cold air. The cooling principle of car air conditioning is quite simple. After pressing the AC button, the compressor clutch engages, allowing the engine to drive the compressor. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. Car air conditioning refers to the air conditioning device installed in vehicles, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety.
14
2
Share

What kind of water is sprayed when applying car film?

The water sprayed when applying car film is called installation solution, which has a formula similar to collar cleaner, not tap water. It is the water sprayed before applying car film, usually made by mixing purified water and installation solution in a certain proportion to ensure the film adheres tightly to the glass without bubbles or gaps. Before applying the film, check if the car window glass is intact and the overall condition of the car glass to ensure the subsequent film application can proceed smoothly. It is essential to cover necessary parts inside the car to prevent liquid from seeping in. The sprayed cleaning solution and lubricant can affect in-car electronic devices and decorative parts like seats.
19
5
Share

How often should the coolant be replaced in the new Magotan?

The coolant in the new Magotan should be replaced every 40,000 kilometers. Regular replacement is necessary, but the interval can be appropriately extended or shortened based on the specific usage environment to keep the vehicle in optimal condition. The full name of the coolant is antifreeze coolant, which means it has antifreeze properties. Coolant helps dissipate excess heat from the engine and prevents the cooling water in the pipes from freezing in winter, which could otherwise cause the radiator to crack or damage the engine block. Additionally, it provides year-round benefits such as preventing scale buildup and corrosion, making it an essential liquid for the engine. The dimensions of the new Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm.
18
5
Share

What is the bolt pattern of the Toyota 86 wheels?

The bolt pattern of the Toyota 86 wheels is 4x100, measured using the Olympus STM6 series measuring microscope system, which offers universal compatibility, high efficiency and reliability, outstanding precision, and durability. If it's a 4-hole pattern, you can directly measure the distance between two diagonal screws using a regular ruler. Remember to measure the same position on both screws. Common bolt patterns include 4x100, 4x108, and 4x114.3. The Toyota 86 has a body size of 4240mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.