Where is the VIN located on a Chevrolet Cruze?

2 Answers
NicoleFitz
07/28/25 9:01pm
Chevrolet Cruze's VIN is located on the nameplate at the lower end of the windshield on the passenger side. The VIN, or Vehicle Identification Number, is a unique 17-character alphanumeric code assigned to each vehicle. It identifies the manufacturer, engine, chassis number, and other specifications of the car. The Chevrolet Cruze is a compact car with dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. The rear middle seat is equipped with a three-point seatbelt, and both the Cruze SE and SX models feature headlights with automatic delay function. Additionally, a USB media input port supporting iPod and USB drives has been added to enhance the entertainment and comfort features of the vehicle.
Was this review help?
2
5
Share
NoraLynn
08/12/25 1:42am
Having worked in an auto repair shop for many years, I've come across numerous Chevrolet Cruze models. The most common location for the VIN (Vehicle Identification Number) is the lower left corner of the windshield, clearly visible from outside the car as it's prominently printed on the glass. Opening the driver's door, you'll also find a white sticker on the door sill pillar displaying the full VIN. If you pop the hood, there might be a metal plate near the engine front or firewall engraved with the number. Locating the VIN isn't just about finding its position – it's crucial for vehicle identification, servicing, insurance claims, and preventing theft or cloning. When you can't find it, check the vehicle manual or registration documents where it's always recorded. For security, avoid exposing it in parking lots; just take a photo and store it safely to deter thieves. Remember to check multiple times – familiarizing yourself with its location saves a lot of hassle, especially during emergencies when quick processing is needed, as it helps confirm the model year and parts specifications.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What is the oil change interval for the Jog 125?

The Jog 125 requires an oil change every 5,000 kilometers or every six months. Oil change principles: The oil change interval depends on the type of oil used. Mineral oil should be changed every 5,000 kilometers; semi-synthetic oil every 7,500 kilometers; and fully synthetic oil can be changed every 10,000-15,000 kilometers. Oil change method: Loosen the nut at the bottom (remember: righty-tighty, lefty-loosey). For a new bike during the break-in period, it's recommended to first loosen the side drain nut. After draining the oil, then loosen the bottom drain nut. Clean any metal shavings from the nut and check the oil clarity in the filter screen. The filter screen will come off with the bottom drain nut when removed. After completing all cleaning procedures, prepare to add new oil. For new bikes during break-in, synthetic vegetable oil is recommended. Before adding new oil, make sure to tighten both the side and bottom drain nuts, and don't forget to reinstall the filter screen at the bottom. Open the oil dipstick to add oil. When the oil has been completely drained, exactly 1L (one bottle) can be poured in.
9
5
Share

Does the 'Yield to the Right' Rule Apply When the Front of the Vehicle Has Already Passed the Intersection?

The 'Yield to the Right' rule does not apply when the front of the vehicle has already passed the intersection. Conditions for applying the 'Yield to the Right' rule: When motor vehicles pass through an intersection without traffic signal control or traffic police direction, in addition to complying with the provisions of Article 51, paragraphs (2) and (3), they should also adhere to the following rules: if there are traffic signs or markings indicating priority, the party with priority should proceed first; in the absence of traffic signs or markings, vehicles should stop and look before entering the intersection, yielding to vehicles coming from the right; vehicles on minor roads should yield to those on major roads; turning motor vehicles should yield to vehicles going straight; and right-turning motor vehicles traveling in opposite directions should yield to left-turning vehicles. Conditions where the 'Yield to the Right' rule does not apply: The 'Yield to the Right' rule does not apply when a vehicle going straight is on a major road and a right-turning vehicle is about to merge into the major road from a minor road. In this case, the vehicle going straight on the major road has the right of way, which differs from the situation at a cross intersection where vehicles from different directions all have the right to proceed straight on the main road, requiring vehicles to yield to those coming from the right.
7
2
Share

Can a Motorcycle Still Be Used After Being Submerged in Floodwater for a Day?

Motorcycle being submerged in floodwater for a day can still be used. However, it requires inspection and treatment. Only after everything is confirmed to be fine can it be ridden again. Classification of Water-Damaged Vehicles: Generally, water-damaged vehicles can be roughly categorized into three types based on the extent of damage: water level exceeding the wheels, with water accumulation in the footwell area; water soaking the seats or exceeding the dashboard; and water directly surpassing the vehicle body. How to Identify a Water-Damaged Vehicle: After a water-damaged vehicle has been cleaned, it is not easy to tell from the exterior whether it has been submerged. Water-damaged vehicles mainly undergo repairs on the affected components, rarely involving bodywork. For example, if the headlights and taillights are flooded, the water is either drained or the light assemblies are replaced. Similarly, water inside the vehicle is cleared, and soaked components are either disassembled and dried or simply air-dried. In fact, water-damaged vehicles are relatively easy to distinguish because even if cleaned thoroughly, they tend to emit a musty odor. Additionally, the trunk is a critical area—if there is significant rust, it likely indicates water damage.
5
1
Share

Why does the Haoyu electric vehicle suddenly stop moving?

There are many reasons why the Haoyu electric vehicle may stop moving. Main reasons why the Haoyu electric vehicle stops moving: Check if the battery output is normal. If the output is too low, it indicates battery damage and the battery needs to be replaced; if the brake handle cable is broken and the wheels rotate, it means the brake handle is faulty and must be replaced; check the throttle handle by shorting the positive and signal wires with a wire—if the vehicle moves, the throttle handle is faulty and needs replacement or repair. Turn on the power and twist the throttle handle, then use a multimeter to measure the positive and signal wires; check if the controller is damaged by shorting the positive 5V wire of the throttle handle—if the throttle handle moves, the controller is fine. The simplest method is to smell for a burnt odor from the controller. If present, it indicates controller damage and replacement is needed; check if the motor is damaged. Loose motor carbon brushes can also cause the vehicle to have power but not move. It is recommended to visit a repair shop for maintenance or replacement. Other possible reasons why the Haoyu electric vehicle stops moving: Damaged Hall sensor inside the accelerator (throttle), recommended replacement; the brake cut-off system is stuck or not reset, simply reset it; control circuit is broken or the controller has a fault, replace necessary components; motor failure, recommended to visit a repair shop for inspection and repair.
1
3
Share

Can a motorcycle still undergo annual inspection after being overdue for 2 years?

A motorcycle overdue for inspection for 2 years can still undergo annual inspection. It will only be mandatorily scrapped if it fails to participate in annual inspection for three consecutive years. Relevant regulations: If after repair and adjustment, the vehicle still fails to meet the national safety technical standards for in-use vehicles; if after repair, adjustment, or the adoption of control technologies, the vehicle's atmospheric pollutant emissions or noise still fail to meet national standards for in-use vehicles; or if the vehicle fails to obtain an inspection compliance mark within three consecutive inspection cycles after the expiration of the inspection validity period, it shall be mandatorily scrapped. The owner must then sell the vehicle to a qualified scrapping and dismantling enterprise. The enterprise will handle the registration, dismantling, and destruction according to regulations, and submit the vehicle's registration certificate, license plate, and driving license to the traffic management department of the public security authority for cancellation. Motorcycle annual inspection: For motorcycle annual inspection, the owner must present the vehicle's driving license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and motor vehicle safety technical inspection compliance certificate to the local vehicle management office to fill out an application form for the inspection compliance mark. Motorcycles within 4 years of registration must undergo inspection every 2 years, while those over 4 years must be inspected annually. Failure to comply with inspection requirements may result in a warning or a fine of up to 200 yuan.
5
5
Share

What is the approximate pressure for spray painting?

Spray painting typically requires an air pressure of 0.3 to 0.6Mpa. Definition of spray painting: Spray paint is a type of synthetic paint made from nitrocellulose, resins, pigments, solvents, etc. It is usually evenly applied to surfaces using a spray gun, featuring water resistance, oil resistance, quick drying, and is used for painting cars, aircraft, woodwork, leather, etc. This substance is toxic and can have certain effects on the body, with toxicity varying depending on the brand due to differences in composition. Special care should be taken during use to avoid inhalation and skin contact. Precautions during spray painting: The air pressure should be adjusted according to the type of paint, temperature, and the size of the workpiece. 1K paint requires lower air pressure, while 2K paint requires higher pressure. High pressure results in smaller paint particles, smoother and flatter surfaces, but the paint is more prone to dispersion, has weaker adhesion, and higher consumption. In high temperatures and quick drying conditions, or with large workpieces, the previously applied paint may harden too quickly, affecting subsequent painting processes. Low pressure produces larger paint particles, thicker paint films, and is more likely to result in an 'orange peel' texture, with slower drying, but the paint particles are less prone to dispersion.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.