Where is the vehicle with license plate 'Meng H' from?

What procedures are required for taking a car abroad?

Below are the procedures required for taking a vehicle abroad: 1. Obtain a legally certified translation, have your driver's license notarized at a Chinese notary office, and then have the notarized driver's license authenticated. 2. It is essential to communicate in advance with the embassy in China or check the embassy's official website for precautions to avoid errors or omissions in the procedures. Precautions for taking a vehicle abroad: 1. Only driver's license notarization can be done at a Chinese notary office, while multilingual translation documents are often products processed by foreign-authorized organizations, which are expensive and time-consuming, requiring the assistance of agencies like travel agencies. 2. In terms of credibility, it is still recommended that mainland residents obtain driver's license notarization from a notary office, as most notary offices can handle this. 3. Authentication requirements vary by country, with authentication divided into Ministry of Foreign Affairs authentication and embassy authentication.

17

2

Share

What are the tire specifications for the Everest?

The tire specifications for the Everest are as follows: 1. Standard Everest: The 2020 Everest standard model featured in the actual photos uses Pirelli SCORPION ATR tires, commonly known as Scorpion tires, which are suitable for various terrains and offer excellent off-road performance. The size is 255/60R18. Additionally, the sport version is equipped with 20-inch wheels. 2. Top-trim and Sport Everest: The top-trim and sport versions of the Everest feature 20-inch wheels, which are more imposing in design. The tire specifications are 265/50R20. The two lowest-trim models use 17-inch wheels with tire specifications of 265/65R17. A full-size spare tire is standard across all models.

16

3

Share

What is the difference in fuel consumption between S gear and D gear?

The difference in fuel consumption between S gear and D gear is as follows: 1. Different main functions: S gear is the sports mode of the car. D gear is the most common gear in automatic transmission models, which enables the car to automatically select gears when moving forward. 2. Different characteristics: When using S gear, due to the increase in engine speed, the fuel injection volume changes and the power output increases. At the same time, the suspension becomes stiffer than usual, reducing body roll when cornering. D gear is one of the most common gears in automatic transmission models, belonging to the forward gear category, covering all forward gears within the car's automatic transmission. 3. Different principles: In S gear sports mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high speeds for a longer time, allowing the car to run at low gear and high speed for an extended period, thereby achieving greater torque output and acceleration. When the gear shift lever is placed in D gear, the hydraulic control system will automatically engage the corresponding forward gear circuit based on the throttle opening signal and vehicle speed signal. As the output shaft speed and engine speed change, it automatically shifts up or down to the appropriate gear within the forward gears, achieving automatic transmission functionality.

19

5

Share

Why does the Volkswagen tire pressure warning light stay on when the tire pressure is normal?

When the Volkswagen tire pressure warning light stays on despite normal tire pressure, turn on the power to allow the vehicle to perform a self-check; then press and hold the tire pressure monitoring button in front of the gearshift lever to reset it. Tire pressure refers to the air pressure inside the tires, which acts as the 'blood pressure' of a car. The level of tire pressure plays a crucial role in the vehicle's performance and power. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and pulling, reducing driving comfort; accelerates uneven wear of the tread center, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to pulling, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, resulting in bead damage and abnormal wear.

12

0

Share

Where is the towing hook on the Highlander?

It is located inside the square cover on the left front bumper. The rear towing hook is positioned at the left rear underside of the vehicle. The Highlander's towing hook consists of two parts: a fixed bracket attached to the rear anti-collision beam and a high-strength towing ring. The front towing hook is used when the vehicle itself breaks down and cannot move, allowing another vehicle to tow it, while the rear towing hook is for towing other vehicles. Precautions for towing a vehicle: 1. Choose the appropriate hook: The towing hook must not only 'hook' properly but also be securely fastened and correctly installed. Double-check that the hook is properly engaged before towing. If the hook comes loose midway, it can cause significant trouble. 2. Prefer a tow bar: If the towed vehicle has brake issues or if towing is required on icy or snowy roads, a tow bar should be used first. A rigid tow bar can prevent the towed vehicle from losing control of its speed if the towing vehicle pulls too hard or needs to brake suddenly. In general, using a tow bar is safer. 3. Control speed and distance: Pay special attention to speed control and the distance between the two vehicles during towing, as slight mismanagement can lead to accidents. The towing speed should ideally be maintained at 20 km/h and must not exceed 30 km/h. Many vehicles lack vacuum-boosted brakes when not running, so speed must be kept low, and a safe distance should be maintained. The optimal distance is 5-11 meters, giving the towed vehicle enough time to react if the towing vehicle brakes suddenly.

7

4

Share

What are the dimensions of the Grand Cherokee?

The body dimensions of the Grand Cherokee are 4828mm in length, 1943mm in width, and 1792mm in height, with a wheelbase of 2915mm. These dimensions not only highlight the vehicle's tall and robust design but also ensure ample interior space, thanks to the wheelbase exceeding 2.9 meters. Here is some additional information: 1. In terms of seating, the Grand Cherokee features leather-wrapped seats, with the driver's seat equipped with electric memory function. Front and rear center armrests come standard, providing convenient back support. 2. The seat padding is quite thick, ensuring that while the vehicle maintains its rugged exterior design, no compromise is made on seating comfort.

10

2

Share

Where is the vehicle with license plate 'Meng H' from?

What procedures are required for taking a car abroad?

What are the tire specifications for the Everest?

What is the difference in fuel consumption between S gear and D gear?

Why does the Volkswagen tire pressure warning light stay on when the tire pressure is normal?

Where is the towing hook on the Highlander?

What are the dimensions of the Grand Cherokee?

What is a Dual-Clutch Transmission?

Can the Accord Pedestrian Protection System Be Turned Off?

What Causes Engine Shaking During Car Startup?

Where is the OBD port located on the Peugeot 3008?