···
Log in / Register

Where is the vehicle inspection certificate sticker placed?

6Answers
BellaLynn
07/29/2025, 06:44:13 PM

The inspection certificate sticker is placed on the upper right corner of the front windshield. According to Article 13 of the "Regulations for the Implementation of the Road Traffic Safety Law": The motor vehicle inspection certificate and insurance certificate should be affixed to the upper right corner of the front windshield of the motor vehicle. Failure to affix the relevant vehicle certificates as required is a violation of the law. Below is relevant information: 1. The motor vehicle inspection certificate is affixed to the upper right corner of the front windshield. Not only the motor vehicle inspection certificate but also the compulsory traffic insurance certificate must be affixed to the upper right corner of the front windshield. 2. In the past, three certificates needed to be displayed in the vehicle: the motor vehicle inspection certificate, the green environmental protection certificate, and the compulsory traffic insurance certificate. Now, only two certificates need to be affixed: the motor vehicle inspection certificate and the compulsory traffic insurance certificate.

Was this review help?
112
Share
PresleyDella
08/15/2025, 08:02:44 PM

When I just bought my first car, I was particularly curious about where the inspection sticker should be placed. The salesperson told me it should be affixed to the upper right corner on the inside of the windshield. He said this is not only the position mandated by national regulations but also convenient for traffic police to spot during roadside checks. I’ve always followed this advice and found that this location doesn’t obstruct my view at all while driving—the windshield remains clear from the driver’s seat. If the sticker is placed crookedly or elsewhere, such as at the bottom of the windshield or on the rear window, it not only blocks the driver’s view but may also lead to misunderstandings by the police, potentially resulting in fines or unnecessary inspections. Once, a friend placed the sticker in the lower left corner and had to redo it during the annual inspection, wasting time for no reason. Every time I wash my car, I gently clean that corner with a soft cloth to ensure the sticker doesn’t bubble or peel off, as it signifies the vehicle’s compliance—letting it expire is not an option. Safety comes first when driving, and the placement of this small sticker is a big deal.

Was this review help?
3
Share
Expand All
Paul
10/18/2025, 12:37:36 AM

After driving for so many years, the inspection sticker has always been fixed in my memory on the upper right corner inside the windshield. From youth to old age, the unchanging position has its reasons—it's the easiest to identify without obstructing the driver's view. When police officers are on duty by the roadside, they can quickly glance at the date as they approach the vehicle. A standardized position ensures the sticker isn't easily scorched by the sun or damaged by rain. I've seen some people place it on the dashboard or the front window near the door, only to be asked to reposition it during the annual inspection, causing unnecessary delays. Keeping that corner clean is crucial; after washing the car, make sure to dry it to avoid residual moisture, which can weaken the adhesive. With the sticker in the right place, your vehicle stays compliant, and you can drive with peace of mind.

Was this review help?
5
Share
Expand All
DelLeila
12/01/2025, 12:17:13 AM

When repairing cars, I noticed that most vehicle inspection stickers are affixed to the upper right corner of the windshield's interior. This higher placement avoids obstructing the driver's view while remaining easily visible for inspection. If applied crookedly, the sticker is more prone to peeling and becomes less stable on bumpy roads. The standard positioning ensures optimal adhesive performance and sticker durability, preventing cracking due to temperature fluctuations. For daily application, it's recommended to clean the surface with a damp cloth, let it dry completely, then apply smoothly without bubbles. With proper placement and timely renewal before expiration, your annual inspection will be hassle-free.

Was this review help?
13
Share
Expand All
LondynFitz
01/21/2026, 01:41:06 AM

As a safety-conscious individual, I understand that the inspection sticker should be firmly affixed to the upper right corner of the windshield. This not only facilitates inspection but also minimizes the risk of distraction while driving. Its elevated position, away from the driver's core line of sight, ensures an unobstructed view of the road ahead. Incorrect placement, such as the center of the windshield or near the car door, may obscure the sticker during police checks, potentially leading to unnecessary disputes or fines. More importantly, proper positioning demonstrates your respect for traffic regulations. Regularly verifying the sticker's condition and correct placement is a fundamental responsibility of driving. A securely placed sticker significantly enhances safety.

Was this review help?
17
Share
Expand All
SanEdward
04/17/2026, 02:01:08 AM

Everyone usually sticks the inspection sticker directly on the upper right corner of the windshield's interior. After the annual inspection, I always place it at that standard spot—simple and hassle-free. Choosing the correct position isn't just for aesthetics but also avoids obstructing the view, allowing traffic police to quickly check the date and status. Before applying, ensure the glass is clean and dust-free, and press firmly on all four corners to prevent peeling. A wrong placement might lead to penalties or re-inspection. When positioned correctly, the sticker can also withstand sun and rain without easily deteriorating. Remember to replace it on time when it expires.

Was this review help?
11
Share
Expand All
More Q&A

How to Replace the Air Conditioning Filter in a Magotan?

Method for replacing the air conditioning filter in a Magotan: 1. Remove the dampers on both sides of the glove compartment to detach it; 2. Once the glove compartment is removed, the air conditioning filter inside will be visible; 3. Release the clip on the right side of the air conditioning filter cover, then pull out the old filter; 4. Install the new air conditioning filter, finally secure the outer cover of the filter and fasten the clip to complete the entire replacement process. In terms of appearance, the Magotan's exterior design is meticulously crafted, incorporating contemporary automotive fashion elements. Its dynamic and elegant styling represents the latest European automotive design philosophy, featuring a robust V-shaped front grille that exudes stability and grandeur, along with sleek and stylish body lines that give the Magotan an impressively low drag coefficient of just 0.28. Regarding the powertrain, the Magotan comes standard with engine start-stop and SSR2.0 second-generation brake energy recovery technology across all models. The powertrain has been comprehensively upgraded to balance performance with fuel efficiency, fully committing to energy conservation and environmental protection.
104
Share

What to Do When the Dashboard Battery Light Turns Red?

The red battery light on the dashboard is a warning light indicating that the alternator is not generating electricity. It illuminates when the key is turned on and should turn off after the engine starts. If it remains lit while the engine is running, it means the alternator is not generating power, and immediate repairs are needed. The alternator is a mechanical device that converts other forms of energy into electrical energy. There are many types of alternators, but their working principles are all based on the laws of electromagnetic induction and electromagnetic force. If the battery itself is faulty—such as being depleted, failing, or damaged—you can use a multimeter to test it, primarily checking the battery voltage. If the voltage is too low, the battery needs to be recharged. If the battery is failing or damaged, it must be replaced promptly.
109
Share

What does the maintenance reminder system mean by 'Please add coolant'?

The car system prompts to add coolant, indicating that the coolant level is insufficient and needs to be replenished promptly. Below is more information about coolant: 1. Product Performance: Coolant consists of three parts: water, antifreeze, and additives. Depending on the antifreeze component, it can be classified into alcohol-based, glycerol-based, ethylene glycol-based, and other types of coolant. 2. Alcohol-based Coolant: Uses ethanol (commonly known as alcohol) as the antifreeze. It has good fluidity and simple preparation process, but its boiling point is relatively low, it is prone to evaporation loss, the freezing point is easily increased, and it is flammable. It has gradually been phased out. 3. Glycerol-based Coolant: The liquid has a high boiling point, low volatility, is not easy to ignite, non-toxic, and has low corrosiveness, but its effect on lowering the freezing point is poor. Only a few Nordic countries still use it.
104
Share

What does DRIVE MODE mean in an automatic transmission car?

DRIVE-MODE refers to the driving modes of a car. It is divided into ECO (Economy) mode, NORMAL (Standard) mode, and SPORT mode. The following are related introductions: 1. ECO mode: ECO mode means the vehicle is driving in an economical mode. The vehicle's computer controls the fuel injection volume, and the transmission control module adjusts the shifting logic to keep the vehicle running in the most economical mode. 2. SPORT mode: SPORT mode means the vehicle has stronger power, but it also means higher fuel consumption. In this mode, the position of the accelerator pedal remains unchanged, but the engine instantly increases the RPM, and the transmission forces a downshift to achieve rapid acceleration of the vehicle.
107
Share

Where is the OBD interface of the Peugeot 5008 located?

The OBD interface of the Peugeot 5008 is located in the cabin. There is a clip with an OBD label at the interface, and the OBD interface can be seen by opening the clip. If the light suddenly comes on while the vehicle is in motion, it indicates a fault in the vehicle's electronic control system, which requires timely inspection and repair. Generally, this type of fault also requires the use of a specialized diagnostic computer to connect to the vehicle's OBD diagnostic interface to read the fault codes and data stream for fault diagnosis and analysis. The Peugeot 5008 is a compact MPV from Dongfeng Peugeot, featuring a seven-seat or five-seat layout. The vehicle's dimensions are 4670mm in length, 1855mm in width, and 1650mm in height, with a wheelbase of 2840mm. In terms of exterior design, the Peugeot 5008 is quite stylish and modern, featuring a borderless design for the grille. The new-style grille looks very premium, and the headlight cluster has an aggressive design. The fang-like LED daytime running lights provide excellent visual impact when illuminated.
117
Share

How to Turn on the Heater in the Buick New Excelle?

Method to turn on the heater in the Buick New Excelle: 1. For manual air conditioning, if the AC indicator is lit, press the AC button to turn off the cooling switch; 2. Rotate the temperature control dial to increase the temperature. The temperature adjustment range of the control dial is 18 to 32 degrees Celsius. Do not set the temperature lower than the outside temperature, otherwise it may result in incorrect temperature control; 3. Press the fan speed switch to adjust the appropriate air outlet speed. The Excelle is a mid-size car launched by SAIC General Motors. In terms of appearance, the Buick New Excelle adopts the brand's new family-style winged chrome grille, making the front face look sharper and more rugged. The combination of black piano vertical grille and high-brightness chrome winged grille focuses the visual center of the front on the logo. In terms of power, the Buick New Excelle introduces General Motors' new generation 1.3T and 1.0T dual-injection turbocharged engines for the first time. These two highly efficient and intelligent engines, which incorporate leading power technologies, are developed based on a new architecture and adopt multiple innovative technologies including dual-injection fuel injection and small-inertia turbochargers.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.