Where is the vehicle identification plate located on the new Lavida?

1 Answers
Sara
07/30/25 3:06am
The vehicle identification plate of the new Lavida is located on the inner wall of the engine compartment. More information about the vehicle identification plate is as follows: 1. The vehicle identification plate is a label that indicates the basic characteristics of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, factory serial number, production date, and manufacturer's name. 2. The production date of the vehicle can be determined by checking the vehicle identification plate, which will display the production date in the driver's compartment. 3. The vehicle must be equipped with a vehicle identification plate, placed in an easily visible location at the front of the vehicle. For buses, the plate is placed above the front passenger door inside the vehicle.
Was this review help?
20
0
Share
More Forum Discussions

What lights should be turned on when a car enters a tunnel?

When entering a tunnel, a car should turn on the contour lights and low beam headlights. Below is more information about turning on the lights after entering a tunnel: 1. Contour lights: Because the light outside the tunnel during the day is strong and glaring, while the light inside the tunnel is relatively weak, there is a period of eye adaptation when entering the tunnel. During this process, the driver can easily affect their judgment of road conditions. Turning on the lights can help the driver observe the road conditions and also alert other vehicles. 2. Low beam headlights: When entering a tunnel, low beam headlights should be turned on to provide close-range illumination. This allows the driver to see other vehicles and the conditions inside the tunnel, and also enables vehicles behind to see the vehicle in front. Driving in a tunnel without turning on the lights poses certain safety hazards.
11
4
Share

Is an Appointment Required for the Subject 1 Exam Now?

An appointment is now required for the Subject 1 exam. Below is some information regarding the appointment for Subject 1: 1. Appointment Rules: For the C1 driver's license, Subject 1 allows up to five chances for retakes. Each retake requires payment of a retake fee and a new appointment. 2. Regulations: According to the 'Rules for the Application and Use of Motor Vehicle Driver's Licenses': Article 37 states that each subject exam can be taken once, and if failed, a retake is allowed once. If the retake is not attended or still results in failure, the exam process for that subject is terminated, and the applicant must schedule a new appointment. However, for Subject 2 and Subject 3 exams, the new appointment must be made at least ten days later. If the Subject 3 safety and civilized driving knowledge exam is failed, the previously passed road driving skills exam results remain valid.
20
0
Share

Does the car pickup require the owner to be present?

No, the vehicle driver, owner, or manager can meet the requirements. Here are the relevant details: It can be delegated to others: Car pickup does not require the owner to be present, as there is no specific process for pickup, so the 4S dealership does not require the user to be present when delivering the new car. When delegating someone else to help with the pickup, you need to provide them with your original ID card and all the necessary documents for the purchase. If the vehicle's final payment has not been made, they should also bring a bank card with sufficient balance. Precautions for others picking up the car: The owner should find a trustworthy friend with good driving skills to help with the pickup. Additionally, it's best to bring along a friend who knows about cars or find someone knowledgeable about cars to accompany them during the pickup, as the most important step in picking up a car is the inspection. Only after ensuring the car is in good condition and free of issues can it be taken away.
15
5
Share

Which is the front brake and which is the rear brake on a motorcycle?

The right-hand position is the front brake, and the left-hand position is the rear brake. For scooters, the front brake is always on the right side and controlled by the right hand, but there are two types of rear brakes: one is a hand brake controlled by the left hand, similar to bicycles—left for rear and right for front. Speed below 20 km/h: For belt-driven scooters, as long as the speed is not below 20 km/h, there is engine braking. Below this speed, the clutch is disengaged. Precautions: When a motorcycle decelerates, the rear wheel's grip decreases accordingly. At this time, braking still relies on the rear wheel, which may not match the desired braking effect. Improper operation may also cause the rear tire to lock up and skid, so riders should be cautious.
5
2
Share

Can Motorcycles Operate in Water?

No, standard motorcycles are designed for land use only. Here are the relevant details: Impact of water ingress: If a motorcycle passes through shallow water, there may be no issues. However, in deeper water, components such as the air filter, carburetor, wheel bearings, and electrical parts may become flooded, increasing the likelihood of malfunctions. Severe cases could lead to engine stalling, water ingress into the engine, or even damage to the engine or other vehicle components. Areas to inspect after water exposure: First, check if the engine has taken in water. If so, ensure all water is completely drained and replace the engine oil before restarting. If the engine is unaffected, stalling is typically caused by water in the air filter, carburetor, or ignition system components (e.g., high-voltage coil, ignition unit, magneto, ignition switch) or their wiring connectors. Drying these components thoroughly should allow the motorcycle to start.
12
4
Share

How Deep Can a Motorcycle Wade Through Water?

For most motorcycles, it is completely safe if the water level is below the exhaust pipe outlet. Since water does not enter the engine and does not even exceed the chassis height, you can generally start and ride the engine with confidence. Dry the motorcycle: After riding home in the rain and parking your beloved motorcycle, make sure to dry it thoroughly, especially the exhaust pipe. Due to severe pollution, rainwater is acidic, which is the main reason for early corrosion of exhaust pipes. Although it may be troublesome, this is definitely the way to care for your motorcycle. Remove moisture: After drying, start the motorcycle and let it idle on the side stand for 5-10 minutes to drain any water from the exhaust pipe. Then, ride at medium speed for a few minutes or let it dry in a shaded area. Avoid exposing it to direct sunlight.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.