Where is the Vehicle Identification Number Located?

2 Answers
CharlesDella
07/24/25 10:36pm
Vehicle Identification Number (VIN) can be found in the following locations: 1. On the front partition wall of the engine compartment; 2. On the left side of the vehicle dashboard, visible from outside through the windshield; 3. On the vehicle nameplate attached to the central pillar; 4. Printed on the vehicle registration certificate. The Vehicle Identification Number, abbreviated as VIN (also known as the chassis number), is a unique 17-character alphanumeric code that identifies the manufacturer, production location, model year, and engine/chassis serial number of a vehicle. This coding system ensures no duplication for 30 years, earning it the nickname "vehicle's ID card". There are two main VIN standards: the ISO 3779 standard adopted by the European Union, and another standard primarily used in North America.
Was this review help?
13
2
Share
Carter
08/10/25 3:04pm
Over my years of driving, finding the Vehicle Identification Number (VIN) has been quite straightforward. The most obvious spot is the lower left corner of the windshield, clearly visible from the driver's seat or by peeking from outside. I remember once when my car needed insurance, the agent asked me to check the sticker on the door frame—right on the metal label by the driver's door when opened. It's also commonly engraved on the firewall under the hood, though you'd need to lift the hood to see it. This unique 17-digit VIN is crucial—repair shops use it to match parts, and it helps avoid scams when buying or selling used cars. If you're ever unsure, the vehicle registration certificate or user manual will definitely have it recorded. Like a car's ID card, it's vital for safety and convenience. Making a habit of saving a photo of it on your phone means you can access it in seconds whenever needed.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Should Freon Be Added If the Air Conditioning in a New Car Is Not Cooling?

Freon needs to be added if the air conditioning in a new car is not cooling. Turn on the air conditioning and also press the AC button. Other reasons for the air conditioning not cooling are as follows: Damaged Expansion Valve: A damaged expansion valve prevents the formation of high pressure in the system before the valve, causing the high-pressure refrigerant to fail to reach 150Kpa. As a result, the evaporator behind the expansion valve cannot cool down, leading to ineffective air conditioning. Internal Wear of the Air Conditioning Compressor: This results in the pressure between the air conditioning compressor and the expansion valve failing to reach 150Kpa to 200Kpa, preventing the refrigerant in the system from circulating normally and causing the air conditioning to not cool. Refrigerant Leakage: If there is too little refrigerant in the air conditioning system, the amount of refrigerant sprayed into the evaporator from the expansion valve will also decrease. Consequently, when the refrigerant evaporates in the evaporator, the amount of heat absorbed will decrease, leading to a reduction in cooling capacity.
16
0
Share

Can You Press the Accelerator During a Hill Start Test?

You can press the accelerator during a hill start test. When starting on a slope, first slowly release the clutch pedal. Wait until the car shakes slightly, then release the brake pedal, and the car will move. If the car doesn't move, release the clutch a bit more until it starts moving. Correct method for hill start: When starting, shift into first gear. Then, slowly lift the clutch pedal with your left foot. Once you feel the clutch engage, pause briefly, then continue to slowly lift the clutch pedal while gradually pressing the accelerator pedal with your right foot. After the clutch is fully engaged, keep your right foot on the accelerator. You can shift to a higher gear once the speed increases. Reasons why manual transmission cars stall during hill starts: Stalling during a manual transmission hill start is usually caused by releasing the clutch too quickly. Practice is needed to improve clutch control.
8
5
Share

Can National IV be Upgraded to National V?

National IV vehicles cannot be upgraded to National V standards. This is because the vehicle identification number (VIN) and the vehicle's record in the environmental protection department cannot be altered. Even if parts of the vehicle that do not meet emission standards are replaced and the calibration data is adjusted to technically comply with the emission standards, the state does not recognize such operations. The records in the environmental protection department and the vehicle management office will still show that this is a vehicle that does not meet emission standards. Concept: The National IV emission standard is the fourth stage of China's motor vehicle pollutant emission standards. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard aims to control and reduce vehicle emissions to below specified levels. Emission: National IV standard buses will no longer have 'black tails.'
8
0
Share

Why Does the Steering Wheel Shake When Braking a Car?

The reasons for steering wheel shaking when braking a car: Brake disc wear or unevenness: Worn brake discs can cause shaking when braking. Solution: Resurface the brake discs or replace them with new ones. It is recommended to have them inspected at a 4S shop. Engine mount aging: Car shaking can sometimes be related to aging engine mounts. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the interior, causing shaking during idling. Solution: Replace the engine mounts. Tire aging, deformation, or bulging: If the driver suspects that the tires are causing the shaking while driving, the simplest method is to carefully feel the tire treads with hands. If the treads are jagged, it indicates that the tires have aged or deformed. Solution: Replace the tires with new ones. Dirty throttle body or excessive carbon buildup in fuel injectors: A dirty throttle body can cause improper closing or a stuck idle stepper motor, both of which can lead to high engine idle speed. Additionally, carbon buildup generated during engine operation can also cause vehicle shaking. Solution: Inspect the throttle body and fuel injectors. If the throttle body is found to be dirty or the fuel injectors have excessive carbon buildup, they should be cleaned promptly.
11
1
Share

How to Adjust the Time on a Car?

First, power on the vehicle, then use these two buttons at the lower left corner of the dashboard to quickly adjust the time. The left button is the selection key—press it once to adjust the hours. Press the left button twice consecutively to adjust the minutes. Then, use the right button to increase or decrease the minutes until the desired time is set.
12
0
Share

How to Use a Torque Wrench?

When using a torque wrench, first select a torque wrench with an appropriate range according to the requirements of the workpiece to be measured. To preset the torque value, pull down the locking ring on the wrench handle while rotating the handle to adjust the main scale line value to the desired torque value. Ensure that the torque wrench is securely connected to the fastener and locked, and confirm that the connection is correct before adjusting the twisting direction. Fit the socket of the torque wrench over the fastener, then apply force slowly on the handle.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.