Where is the vehicle certificate number located on the car body?

1 Answers
LaKathryn
07/30/25 6:45am
The vehicle certificate number is located at the top right corner of the first page of the vehicle registration certificate. The motor vehicle registration certificate is issued together with the vehicle license when the vehicle is registered. It contains detailed information about the owner and various parameters of the vehicle. The vehicle certificate is attached with the vehicle when it leaves the factory and needs to be submitted to the vehicle management office for archiving when the vehicle is registered for a license plate, in exchange for the motor vehicle registration certificate. After purchasing a car, it is necessary to apply for a license plate number. When registering for a license plate, relevant documents must be prepared, including the car purchase invoice, vehicle certificate, compulsory traffic insurance policy, and the owner's ID card. Then, go to the vehicle management office to fill out the forms, take impressions of the car engine number and chassis number, submit the documents to the purchase tax hall for payment, and receive the purchase tax payment certificate.
Was this review help?
10
0
Share
More Forum Discussions

What Should Be Noted During the Overtaking Process While Driving?

During the overtaking process, forced overtaking is prohibited. If the vehicle ahead does not yield speed or lane due to certain reasons, forced overtaking should not be attempted. When there is insufficient safe distance ahead of the vehicle in front, do not forcibly squeeze in or push against it. Maintain a smooth overtaking path. Before overtaking, move into the left lane in advance, and delay returning to the right lane after overtaking, keeping the driving trajectory basically parallel to the vehicle being overtaken. Always pay attention to maintaining a safe distance from the overtaken vehicle before, during, and after overtaking. If an obstacle is detected on the left side during overtaking and the lateral distance is too small, potentially causing a squeeze or scrape, quickly decelerate, abort the overtaking, and wait for another opportunity. However, use the brake cautiously to prevent skidding. Key considerations for overtaking include: timing the overtake correctly. Often, it's safer to overtake when there are fewer vehicles ahead and behind and the road conditions are good. Remember to use the turn signal—activate the left turn signal to alert the vehicle behind that you intend to overtake, and quickly switch to the right turn signal after overtaking to return to the normal lane. Use the horn appropriately. Depending on the situation, honk the horn to alert the vehicle ahead of your intention to overtake, prompting them to yield. Utilize high beams and hazard lights effectively. Proper use of high beams and hazard lights can alert the vehicle ahead that you are overtaking and also remind oncoming vehicles to stay safe.
14
1
Share

Why does the slippery road indicator appear on the dashboard?

On-board slip indicator symbol represents the Electronic Stability Program (ESP) symbol. When this yellow warning light illuminates on the vehicle, there are only two possible conditions. One is that the system is currently in operation, and the other is that the system has malfunctioned and requires repair. Solutions for the slippery road indicator appearing on the dashboard: 1. Turn off and restart the vehicle: First find a safe and suitable location to park the car, then check whether the slippery road indicator on the dashboard disappears. If it doesn't disappear, turn off the vehicle and restart it to eliminate the possibility of dashboard malfunction. 2. Visit a repair facility: If the slippery road indicator still doesn't disappear after restarting the vehicle, it means the ESP system has malfunctioned and you should go directly to a repair facility for service.
6
5
Share

What is the Rover car brand?

Rover is a British car brand. Rover is an automobile company founded in 1877. Here is an introduction to Rover cars: 1. The Rover car series includes the 200 series, 400 series, 600 series, 800 series, MINI series, Jeep series, Discovery series, etc. 2. In 2005, China's Nanjing Automobile Group purchased Rover's car company and engine production division. 3. In 2008, the Rover brand was sold to India's Tata Group, after which the Rover brand was officially divided. 4. In 2008, Shanghai Automotive Industry Corporation (SAIC) completed the industrial and commercial transfer procedures for the 100% acquisition of Nanjing Automobile Group on April 1. Based on the core technology of the Rover 75, SAIC integrated European luxury car technology and renamed it, thus creating the first international brand in China's automotive industry—Roewe.
11
3
Share

How to Release the Steering Wheel Lock with One-Key Start?

Under normal circumstances, when the engine one-key start button is in the ACC state, the steering wheel will automatically unlock. If the steering wheel fails to unlock properly, the following method can be adopted: turn the steering wheel left and right while pressing the engine one-key start button to release tension and unlock the steering wheel. Below are the relevant details: Function of the one-key start steering wheel lock: The steering wheel lock is a simple anti-theft feature. When the car is turned off, rotating the steering wheel from the centered position in one direction (usually to the left) by a certain angle will cause a "click" sound, locking the steering wheel. In the locked state, the steering wheel cannot be turned, the key cannot be turned, and the car cannot be started, thereby achieving anti-theft functionality. One-key start device: The one-key start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also turn off the engine. This device can be installed in place of the original key lock or as an independent panel modification. Conditions for automatic steering wheel lock: When the engine one-key start button is in the OFF state, the steering wheel locks for anti-theft purposes. The steering wheel will also automatically lock when the car door is opened or the smart key is removed from the smart key cylinder.
6
2
Share

What is the speed rating of 95v tires?

Tire marking 95v indicates that the maximum speed a 95v tire can withstand is 240 kilometers per hour. 95v represents the tire's speed rating and load index, where 95 is the load index and v is the speed rating. The load index and speed rating of tires are typically marked on the sidewall, which contains various crucial information and key parameters. Precautions for tire usage: 1. Tire specifications, recommended tire pressure, manufacturing date, and other data are usually marked on the sidewall. The manufacturing date is represented by a four-digit number, such as 1519, indicating the tire was produced in the 15th week of 2019. Tires also have a shelf life; most unused tires have a shelf life of three years, and tires older than three years should not be purchased. Since tires are rubber products, they will age even if stored unused for extended periods. 2. Most tires installed on vehicles can last for four years, so it is recommended to replace tires every four years. After replacing tires, perform a dynamic balance test on each wheel to prevent abnormal vibrations during high-speed driving. During regular vehicle use, frequently check the tire pressure and surface for any damage. 3. Tire pressure is critical; it should not be too high or too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground. If the tire pressure is too low, the tire may experience wave deformation during high-speed driving, increasing the risk of a blowout.
18
0
Share

How to Deal with the DPF Warning Light?

Currently, there are two scenarios when the DPF light comes on, involving three operational states: automatic regeneration, manual regeneration, and on-demand regeneration. Below are the details: 1. Automatic Regeneration: The DPF indicator displays green, indicating no need for manual intervention. This typically occurs when the vehicle is driven at high speeds (above 80km/h). Continue driving normally until the particulate matter is processed, and the DPF light will turn off automatically. 2. Manual Regeneration: The yellow DPF light flashes, usually when the vehicle is driven at speeds below 80km/h. In this case, promptly move the vehicle away from the road, flammable, and explosive materials. Once parked, shift to neutral, engage the parking brake, and press the DPF control button. The yellow light will stay on continuously, and the process takes about 15-30 minutes. Once completed, the light will turn off automatically. 3. On-Demand Regeneration: This can be performed at any time, suitable for users who primarily drive in urban areas. For example, after returning home, park the vehicle, press and hold the DPF button for 3-5 seconds to initiate a check. If the yellow light flashes, manual regeneration is required. Press the DPF button again, and the yellow light will stay on. Wait for 15-30 minutes until the light turns off, indicating the particulate matter has been processed.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.