Where is the vehicle annual inspection location in Yan'an?

What transmission is used in the Changan Oushang X7?

Changan transmission is the one used in the Oushang X7. Changan (China Changan Automobile Group Co., Ltd.), formerly known as China South Industries Automobile Corporation, was established in December 2005 and is headquartered in Beijing. The Changan Oushang X7 is equipped with two types of transmissions: a 7-speed dual-clutch transmission and a 6-speed manual transmission. The dual-clutch transmission (DCT) differs from conventional automatic transmission systems. Based on a manual transmission yet not an automatic one, it combines the flexibility of a manual transmission with the comfort of an automatic transmission while providing uninterrupted power output. A manual transmission is a gear-shifting device that alters the engine's speed and torque transmitted to the drive wheels, enabling the vehicle to achieve different traction forces and speeds under various conditions such as starting, climbing hills, turning, and accelerating. For the Changan Oushang X7's transmission, the following points should be noted during daily use: Do not delay changing the transmission oil for an extended period. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause overheating and a noticeable jolt when shifting back into D (Drive) mode. Never shift into D or R (Reverse) before the vehicle comes to a complete stop. Some drivers, aiming for a 'smooth' operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in D mode. Automatic transmission vehicles can overheat under high loads or shift prematurely, resulting in insufficient power for climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in N (Neutral) mode. Avoid using tow ropes or directly towing the vehicle with another car.

5

0

Share

What are the reasons for insufficient power in the Besturn B50?

Here are the specific reasons for insufficient power in the Besturn B50: 1. Engine carbon deposits: Commonly, spark plug carbon deposits can cause poor ignition, leading to incomplete fuel combustion, increased fuel consumption, and consequently insufficient power. 2. Engine fuel system failure: Such as clogged fuel injectors, fuel pipe leaks, or aging fuel pumps causing a drop in power, or a clogged oil filter can also result in weak vehicle performance. 3. Blocked intake or exhaust system: If the air filter or the three-way catalytic converter in the exhaust pipe is clogged, it can obstruct the vehicle's intake and exhaust, making the engine 'breathe' poorly, which manifests as weak vehicle performance. 4. Single or multiple cylinder misfire: If a cylinder in a three-cylinder engine misfires, it can severely affect the engine's performance, causing intense and unstable shaking. Similarly, a misfire in a four-cylinder engine can cause the same issue, though the power drop is less severe compared to a three-cylinder engine.

11

2

Share

What is the function of the secondary air pump in the Besturn B50?

The secondary air pump in the Besturn B50 serves to inject air into the exhaust manifold after a cold engine start, thereby reducing emissions. Below is a detailed introduction to the secondary air system: 1. Function: The secondary air system is one of the external purification devices designed to reduce tailpipe emissions. It introduces additional air into the exhaust gases to increase oxygen content, allowing unburned harmful substances like carbon monoxide (CO) and hydrocarbons (HC) to undergo further combustion under high-temperature conditions. 2. Working Principle: When the engine is running, the crankshaft drives the air pump via a belt, generating a high-volume, low-pressure airflow that passes through a hose to a diverter valve. Under normal conditions, the diverter valve opens, directing the airflow through a one-way valve into the air injection manifold. The air injection manifold then sprays the airflow into the engine's exhaust ports or exhaust manifold, where it reacts with HC and CO in the exhaust gases, converting them further into CO2 and water vapor to minimize exhaust pollution.

14

0

Share

Why is the fuel tank indicator flashing?

Generally, this issue is caused by a faulty fuel level sender contact. It is recommended to replace the fuel level sender. Here is the relevant information: Fuel Gauge: Drivers can determine whether refueling is needed based on the fuel gauge's display of the remaining fuel in the tank. If refueling is required, the fuel gauge can also accurately display the amount of fuel added each time. The fuel gauge does more than just serve as a scale; it can also more precisely and advancedly display the car's fuel consumption per kilometer, the size of the car's fuel consumption, and whether fuel is being used efficiently. The fuel gauge will also alert the driver to the remaining fuel's range. Precautions: If the driver does not refuel in time, once the fuel storage falls below a certain value, the car's fuel gauge will activate a fuel warning function. In addition, the car's fuel gauge can even display the odometer and store real-time measurement data for three months for data management.

8

4

Share

Why does the Mercedes-Benz auto start-stop always show a yellow light?

If the auto start-stop of a Mercedes-Benz always shows a yellow light, it indicates insufficient battery charge, and the battery needs to be recharged. Here are the specific details about the auto start-stop function: 1. Auto Start-Stop Button: The auto start-stop button is located to the left of the cigarette lighter, with an icon of a circle containing the letter 'A' and 'OFF' below. Simply press the button to turn off the auto start-stop. 2. Default Activation: The auto start-stop is activated by default. Every time the vehicle is restarted, the auto start-stop will turn on. This button cannot permanently disable the function; you need to press it each time you start the vehicle to turn off the auto start-stop. 3. Function Purpose: The engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move again, the system automatically restarts the engine. This helps reduce unnecessary fuel consumption, lower emissions, and improve fuel economy.

7

4

Share

What Causes the Friction Sound When a Car Turns?

When a car turns, the squeaking sound from the tires is caused by the friction between the rubber and the ground, which is a normal phenomenon. This occurs because the car's inertia moves it forward while turning, resulting in the sound of resistance between the tires and the ground. Here are some related explanations: Normal Noise: When car tires come into contact with the ground, they produce varying levels of noise due to factors such as the type or unevenness of the road, the car's speed, the type of tires, and the tire's air pressure. Therefore, no matter how perfect a car is, it cannot completely eliminate the noise generated between the tires and the ground during driving. Other Causes of Tire Noise: If the sound is a rattling noise, it may indicate an issue with the CV joint (constant velocity joint), which requires replacement. If the sound is a metallic scraping noise, it could be due to the brake shield rubbing against the brake pad. In this case, you can use a screwdriver to adjust the shield slightly.

14

2

Share

Where is the vehicle annual inspection location in Yan'an?

What transmission is used in the Changan Oushang X7?

What are the reasons for insufficient power in the Besturn B50?

What is the function of the secondary air pump in the Besturn B50?

Why is the fuel tank indicator flashing?

Why does the Mercedes-Benz auto start-stop always show a yellow light?

What Causes the Friction Sound When a Car Turns?

Can dishwashing detergent be added to car windshield wiper fluid?

How Many Years Can an Electric Car Be Used?

Can a Gasoline Vehicle Quota Be Reverted After Purchasing an Electric Vehicle?

What type of engine oil does the Haval M6 use?