···
Log in / Register

Where is the vehicle annual inspection in Qingpu District?

4 Answers
MiguelFitz
07/28/25 4:34pm
In Qingpu District, Shanghai, vehicle annual inspections are conducted at the following locations: No. 895 Qing'an Road, Qingpu District, Shanghai; No. 1111 Xinda Road, Qingpu District, Shanghai; and No. 3588-3638 Beiqing Highway, Qingpu District, Shanghai. No. 895 Qing'an Road, Qingpu District: Shanghai Qingpu Vehicle Inspection and Repair Center (Inspection Station No. 020), Tel: 39200212. Services: Annual inspection for large and medium-sized passenger vehicles, heavy and medium-sized trucks, small motor vehicles, and motorcycles. No. 1111 Xinda Road, Qingpu District: Shanghai Dahao Vehicle Inspection Center (Inspection Station No. 065), Tel: 69720360. Services: Annual inspection for large and medium-sized passenger vehicles, heavy and medium-sized trucks, and small motor vehicles. No. 3588-3638 Beiqing Highway, Qingpu District: Shanghai Dezhong Motor Vehicle Inspection Service Center (Inspection Station No. 070), Tel: 59771999. Services: Annual inspection for large and medium-sized passenger vehicles, heavy and medium-sized trucks, and small motor vehicles.
Was this review help?
1
0
Share
McVictoria
08/11/25 8:48pm
Last time I did my vehicle annual inspection in Qingpu District, I went to the Qingpu Motor Vehicle Inspection Station, specifically located on Qing'an Road, which is easy to find with navigation. Car owners should prepare their vehicle license, ID card, and compulsory motor vehicle insurance policy in advance to avoid a wasted trip. The inspection process includes checking the lights, brakes, and other safety systems, and the whole process takes about half an hour to an hour. It is recommended to arrive before 10 a.m. on weekdays to avoid peak hours. After the annual inspection, promptly address any abnormal records to reduce future troubles. I usually make it a habit to regularly check my vehicle's condition, which helps me pass the annual inspection in one go, saving time and hassle. For vehicles over 6 years old, extra attention should be paid to the environmental protection inspection, and details can be checked on the vehicle management office's official WeChat account.
Was this review help?
11
4
Share
Expand All
GabrielleFitz
09/29/25 7:18am
Finding an annual inspection site in Qingpu District is easy: Open the Baidu Maps or Gaode Maps App, search for 'Qingpu District Vehicle Annual Inspection', and nearby stations like the Qingpu Motor Vehicle Inspection Center will immediately pop up with prominent locations. Drive there with all your documents ready; the inspection fee is around 100 yuan. Ensure your car has no warning lights on, otherwise it won't pass; booking online is better to avoid queues. The navigation to Qingpu is clear, and I knew through the App that parking there is convenient. Keep your vehicle records clean afterward to make the next annual inspection smoother.
Was this review help?
19
4
Share
Expand All
JamesLee
11/13/25 2:25am
For vehicle annual inspection in Qingpu District, go directly to the officially designated inspection stations, such as those under the Qingpu District Vehicle Management Office, typically located around Xinjin Road. Bring your original driver's license, vehicle registration certificate, and insurance policy. The process includes checking engine emissions and tire wear. Checking lights and brakes in advance can avoid rework. Wait times can be around half an hour during peak hours, with transparent fees. After the inspection, remember to make a copy of the inspection report for your records.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What Does It Mean When the Battery Warning Light Comes On in a Car?

The illumination of the battery warning light indicates that the generator voltage is lower than the battery voltage, resulting in a power supply circuit fault. At this time, the vehicle is running on battery power, and the generator should be inspected and repaired at a repair shop as soon as possible. Below are specific details about car batteries: 1. Classification of batteries: Car batteries are divided into maintenance-free batteries and conventional batteries (lead-acid batteries). Most current vehicle models use maintenance-free batteries, while many Japanese cars use conventional batteries. Conventional batteries have electrodes made of lead and lead oxide, with an electrolyte of sulfuric acid solution. Their lifespan is generally around 2 years, so replacing them every two years is most reasonable. 2. Regular maintenance: To extend the battery's lifespan, regular maintenance and good driving habits are necessary. When the electrolyte is insufficient, the battery may not hold a charge, requiring timely refilling. After turning off the car, ensure all lights are off to avoid excessive battery drain. If the car is parked for an extended period, it is recommended to disconnect the battery's negative terminal to prevent discharge. It is also advisable to start the car once a week, allowing the battery to charge at idle speed via the internal generator, ensuring sufficient power for the next start.
12
2
Share

What is the function of the camshaft?

Automobile camshaft is responsible for controlling the opening and closing of the valves. Below are the key points about the camshaft: 1. Camshaft: It is a component in piston engines. Although in four-stroke engines, the camshaft rotates at half the speed of the crankshaft, its rotational speed is still very high, and it needs to withstand significant torque. Therefore, the design requires high strength and robust support for the camshaft, which is typically made of high-quality alloy steel or alloy steel. 2. If: The oil pump fails to provide sufficient oil pressure due to prolonged use, or the lubrication passages are blocked preventing oil from reaching the camshaft, or the bearing cap fastening bolts are over-tightened preventing oil from entering the camshaft clearance, all these can lead to abnormal wear of the camshaft. 3. Abnormal wear of the camshaft: This can cause an increase in the clearance between the camshaft and the bearing seat, leading to axial displacement of the camshaft during operation, which in turn produces abnormal noise. 4. When installing the bearing cap: Pay attention to the directional arrows and position numbers marked on the surface of the bearing cap, and strictly follow the specified torque using a torque wrench to tighten the bearing cap fastening bolts.
9
3
Share

How to Check Tire Pressure on Audi Q5?

Audi Q5 tire pressure checking method: Start the car, view the central display screen and touch the CAE button on the left; enter the relevant menu information in vehicle settings, select tire settings in the vehicle settings options; in tire settings, click tire monitoring to view tire pressure. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure tire pressure, and uses wireless transmitters to send pressure information from inside the tire to the central receiver module, then displays the tire pressure data of each tire. When the tire pressure is too low or leaking, the system will automatically alarm. Indirect tire pressure monitoring: When the pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than other wheels. By comparing the speed difference between tires, the purpose of monitoring tire pressure is achieved. The indirect tire alarm system actually relies on calculating the rolling radius of the tire to monitor pressure. Introduction to Tire Intelligent Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and a 4-wheel indirect system. Compared with using all direct systems, this composite system can reduce costs and overcome the defect that the indirect system cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires like the direct system.
20
2
Share

Where is the accelerator pedal located?

The accelerator pedal is located at the far right side below the driver's compartment on the left. The accelerator pedal is a device that controls the fuel supply on an internal combustion engine. In automotive engines, the throttle is typically controlled by a pedal, also known as the gas pedal, which regulates the fuel supply to the engine. When operating the accelerator pedal, it is important to 'press gently and release slowly.' The pressing action should be smooth, and the force and extent of pressing should be determined based on the vehicle's driving conditions. During driving, the left foot should not be placed on the brake pedal. For manual transmission vehicles, the left foot should only be used to press the clutch pedal when shifting gears. Under normal driving conditions, the left foot should not be placed on any pedal. Both braking and acceleration are controlled solely by the right foot. There are two key reasons why the left foot should not be placed on the pedal: 1. During prolonged driving, both feet can become quite tired, leading to an unconscious tendency to press down. If the left foot is on the brake pedal at this time, pressing it could easily cause an accident, posing a significant danger. 2. Most people are right-handed, meaning the right foot has faster reaction times. In emergency situations, the right foot can react in the shortest possible time, lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot would be in a suspended state during braking, making it easy for both feet to press simultaneously, which can be dangerous.
2
2
Share

Must the Clutch Be Depressed When Braking in a Manual Transmission Car?

When braking in a manual transmission car, there are situations where the clutch needs to be depressed and others where it does not, as this is not a fixed procedure. The primary purpose of depressing the clutch while braking is to prevent stalling. Below are some considerations regarding clutch usage in manual transmission cars: 1. There is no need to depress the clutch when the speed has not reached the critical point. During turns, depressing the clutch can sometimes make the car more prone to tipping over, as it causes a sudden loss of tire grip. 2. The car will not stall if the speed is above 20 km/h in third gear, above 25 km/h in fourth gear, and above 35 km/h in fifth gear. This means that when braking during driving, each gear must maintain a speed above its minimum threshold; otherwise, the clutch must be depressed to prevent stalling. 3. When the speed is suitable for shifting to a higher gear, immediately release the accelerator pedal, depress the clutch pedal, and move the gear lever to the neutral position; then quickly release the clutch pedal and immediately depress it again while shifting the gear lever to the higher gear. Subsequently, gradually release the clutch pedal while slowly depressing the accelerator pedal to ensure the car continues to drive smoothly.
5
2
Share

At What Age Can a Baby Sit in a Safety Seat?

Safety seats are suitable for babies around seven months old. Here is some relevant information about safety seats: 1. Classification: Child safety seats can be categorized into three types based on the fixing methods: the European standard ISOFIX fixing method, the American standard LATCH fixing method, and the seat belt fixing method. 2. Installation Reminder: They should not be installed on the front seats of cars equipped with airbags. Additionally, it is important to note that if a child safety seat can be installed rear-facing, it must be installed in this manner, as this maximizes the protection of the child's safety.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.