Where is the USB port on the Tiggo 8?

What is the difference between white dashed lines and yellow dashed lines on the road?

Here are the differences between yellow dashed lines and white dashed lines in the same direction lanes: Applicable environments: Yellow dashed lines are usually set on relatively narrow road surfaces; white dashed lines are usually set on relatively wide road surfaces. Distinction aspects: Yellow dashed lines are used to distinguish opposing traffic flows in different directions; white dashed lines are generally used to divide different lanes in the same direction. Operation aspects: Under safe conditions, yellow dashed lines allow crossing the line to borrow a lane for overtaking or making a U-turn; white dashed lines allow crossing the line for lane changes under safe conditions, but U-turns are not permitted.

1

3

Share

What are the traffic restrictions for non-local vehicles in Tianjin in 2020?

2020 Tianjin traffic restrictions for non-local vehicles: 1. Restricted hours: 7:00-9:00 and 16:00-19:00 on each workday from June 8, 2020 to April 8, 2021 (workdays generally refer to Monday to Friday, statutory holidays are excluded); 2. Restricted vehicles: Tianjin-registered and non-local registered motor vehicles (excluding Beijing-licensed small and mini passenger vehicles); 3. Restricted area: Within the Outer Ring Road, excluding the Outer Ring Road itself; 4. License plate last digit restrictions: Monday to Friday restrictions apply to vehicles with license plate ending digits as follows - Monday: 4 and 9, Tuesday: 5 and 0, Wednesday: 1 and 6, Thursday: 2 and 7, Friday: 3 and 8 (note: license plates ending with letters are managed as 0).

17

1

Share

What lights to use when meeting another vehicle?

When meeting another vehicle, use low beam headlights. On roads without street lights or poor lighting, when the distance to the oncoming vehicle is about 150 meters, you should consciously switch to low beam and reduce speed. Avoid using high beam headlights at close range, as the strong light can dazzle the other driver and make it difficult to see the road clearly. High beam headlights should only be used on roads without lighting. They should not be used when following another vehicle at close range, nor should they be used in conditions of low visibility such as fog, rain, snow, or dust. Relevant regulations from the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China": Article 48, Paragraph 5: On roads without central barriers or center lines, vehicles meeting at night should switch to low beam when the distance to the oncoming vehicle is more than 150 meters. Low beam should also be used when meeting non-motorized vehicles on narrow roads or bridges. Motor vehicles passing through intersections controlled by traffic signals should use low beam at night. Article 58: When driving at night without street lights, under poor lighting conditions, or in low visibility conditions such as fog, rain, snow, dust, or hail, motor vehicles should turn on headlights, clearance lights, and tail lights. However, high beam should not be used when following another vehicle at close range in the same direction. In foggy conditions, motor vehicles should turn on fog lights and hazard warning flashers. Article 59: When passing sharp curves, slopes, arched bridges, pedestrian crossings, or intersections without traffic signals at night, motor vehicles should alternately use high and low beam headlights to signal.

6

2

Share

How to Transfer an Out-of-Town License Plate to a Local One?

To transfer an out-of-town license plate to a local one, first, check the vehicle's emission standard and consult the local vehicle management office to see if they accept vehicles with that emission standard. If acceptable, you must first go to the vehicle management office where the original license plate was issued to complete the second-hand vehicle transfer procedures. After fulfilling the local requirements, proceed with the vehicle file transfer process. Then, take the vehicle's file to the local municipal public security bureau's vehicle management office to complete the registration process. Provided the vehicle management office approves the transfer, apply for the registration transfer according to the following regulations and locations: 1. Imported vehicles and domestic models such as Shanghai Buick, Guangzhou Honda, Changchun Audi A6L, Fengshen Bluebird, Shanghai Passat, Hainan Mazda, as well as police vehicles, taxis, training vehicles, minibuses, special vehicles, embassy vehicles, and foreign vehicles should be processed at the vehicle management office. 2. Urban areas do not handle the registration of agricultural transport vehicles and various motorcycles. For motorcycles, agricultural transport vehicles, and specialized machinery in suburban districts and counties, go to the local vehicle management station. 3. Other vehicles should be processed at the vehicle management sub-office corresponding to the owner's residential address.

9

0

Share

What Causes Frequent Stalling When Reversing in a Manual Transmission Car?

Frequent stalling when reversing in a manual transmission car is due to missing the correct clutch position and not releasing the left foot properly. Stalling when starting: Stalling during startup occurs when the clutch pedal is released too quickly without pausing at the "half-engaged" position, combined with insufficient throttle application, or missing the required "pause" position. Not releasing the left foot after starting: This happens because beginners misunderstand the role of the clutch pedal. Many novices believe that as long as the left foot presses the clutch pedal, the car won't stall. In fact, this is a misconception that only increases clutch wear and reflects immature driving skills.

10

4

Share

What is the tire size of the Wrangler?

The Wrangler has three tire size specifications: 255/75R17, 255/70R18, and 245/75R17. In 255/75R17, the first number 255 represents the tire width of 255MM, 75 indicates the aspect ratio of the tire section is 75%, meaning the section height is 75% of the width, 17 represents the rim diameter of 17 inches, and the letter "R" in the middle stands for radial tire. In 255/70R18, the first number 255 represents the tire width of 255MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, 18 represents the rim diameter of 18 inches, and the letter "R" in the middle stands for radial tire. In 245/75R17, the first number 245 represents the tire width of 245MM, 75 indicates the aspect ratio of the tire section is 75%, meaning the section height is 75% of the width, 17 represents the rim diameter of 17 inches, and the letter "R" in the middle stands for radial tire. The Wrangler's tires are from the Goodyear brand, featuring an open shoulder tread block design, with the spare tire being full-size. If you want to replace the tires yourself, follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire you want to replace, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not completely loosen them, just enough to eliminate resistance, keeping the tire on the ground when first loosening the nuts ensures the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, then remove the nuts completely; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten them by hand until all nuts are snug, at which point the tire replacement is complete. Besides the model, tires also have the following common markings: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: indicates the maximum speed the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".

18

1

Share

Where is the USB port on the Tiggo 8?

What is the difference between white dashed lines and yellow dashed lines on the road?

What are the traffic restrictions for non-local vehicles in Tianjin in 2020?

What lights to use when meeting another vehicle?

How to Transfer an Out-of-Town License Plate to a Local One?

What Causes Frequent Stalling When Reversing in a Manual Transmission Car?

What is the tire size of the Wrangler?

What does nappa leather mean?

Is It Necessary to Install a Central Control Screen in Older Cars?

What is the REAR function?

What are the regulations for the scrap age of pickup trucks in 2020?