···
Log in / Register

Where is the USB port on Tesla Model 3?

4 Answers
StPaisley
07/29/25 8:12pm

Tesla Model 3 has a total of four USB ports. The two ports provided for rear seat passengers are USB-C ports, located below the rear air vents; the USB port on the front passenger side is USB-A, while the one on the passenger side is USB-C. More relevant details are as follows: 1. Improved driving comfort: On June 5, 2018, Tesla upgraded the Model 3, enhancing driving comfort. The company not only upgraded the vehicle's suspension system but also improved the rear seat configuration. 2. Model 3 does not use an aluminum body: Therefore, the body size will be reduced by 20% to offset the impact of increased weight on range. The Model 3 is expected to have a range of around 320 kilometers. The super cool but impractical falcon-wing doors are canceled, as is the 3-second 0-60 mph acceleration, and the autopilot feature might also be removed. Tesla's fourth model, the Model 3, was released with a range of 346 km and a 0-100 km/h time of less than 6 seconds.

Was this review help?
14
4
Share
LeGabrielle
08/14/25 4:32pm

I've been driving a Tesla Model 3 for quite some time. Its USB ports are mainly located inside the front storage compartment of the center console. You can see them by opening the lid, positioned at the bottom or on the side. Typically, they are USB-A ports, but newer models might have switched to USB-C. These ports are extremely practical, whether for charging your phone or plugging in a USB drive to play music files, and the charging speed is quite fast. The location remains the same across different model years, but the port specifications might have updates, so buying an adapter for expansion can be more convenient. Remember, the power is only available after the car is started. If there's no power, check if the cable is damaged. During long drives, I use it to connect a game controller to pass the time, as Tesla's operating system directly supports extended entertainment features. I always keep a fast-charging cable in the car for emergencies, and the design is quite thoughtful, not affecting driving safety.

Was this review help?
3
5
Share
Expand All
FernandoRose
10/16/25 3:05am

As a tech-savvy Model 3 owner, I can confirm the USB ports are definitely located inside the front trunk compartment, within easy reach from the driver's seat. When you lift the center console lid, you'll typically find a standard port at the base - older models may have USB-A while newer versions feature USB-C. These ports aren't just for charging; they support data transfer too, useful for software updates or connecting peripherals like game controllers. Worth noting, rear seats usually lack USB ports, with front compartment placement designed to minimize distracted operation. Accessories like multi-port adapters can expand connectivity, especially handy when traveling with multiple devices. While port locations remain consistent across vehicle versions, consulting the user manual is recommended to confirm the latest configuration. Charging efficiency depends on vehicle voltage, and using substandard cables should be avoided to prevent overheating issues.

Was this review help?
8
5
Share
Expand All
OLondon
11/29/25 3:53am

When driving the Model 3, the USB port is located inside the center console storage compartment, easily accessible by opening the lid. Its forward position minimizes the risk of turning your head while operating, ensuring safe driving. I often use it to charge my phone—just push the lid to access it. The port is a standard USB type, with slight variations between new and older models. For safety, ensure the charging cable is securely plugged in to prevent loosening and avoid short-circuit risks. During long drives, avoid fiddling with it while driving; it's best to operate when parked. The location is consistently reliable across different vehicle models, with minimal variation issues. Carrying a spare cable is advisable for emergencies.

Was this review help?
2
2
Share
Expand All
More Forum Discussions

What is the cause of the BMW ix3 powertrain malfunction?

BMW ix3 powertrain malfunction occurs due to cold solder joints present in the battery cell contact system during the production of high-voltage battery unit modules. If these cold solder joints become loose, they may lead to fault symptoms. Types of powertrain malfunctions: Clutch slippage fault, manifested as difficulty in vehicle starting, weak driving power, poor acceleration, and in severe cases, emitting a burnt smell or black smoke. Powertrain abnormal noise fault, characterized by body shaking during vehicle startup accompanied by clattering impact sounds, which become more pronounced when changing speeds, especially during slow driving. Transmission gear jumping fault, where the transmission automatically returns to neutral while driving in gear. Incomplete clutch disengagement fault, frequently causing difficult gear shifting with gear grinding noises. The vehicle may move or the engine may stall without releasing the clutch pedal after engaging gear. Introduction to the powertrain system: The powertrain system generally consists of a clutch, transmission, universal drive assembly, main reducer, differential, and half-shafts. Its fundamental function is to transmit the power generated by the engine to the vehicle's driving wheels, generating driving force to enable the vehicle to travel at certain speeds.
10
4
Share

What brands are under Audi?

Audi owns four brands: Audi Germany, Porsche Germany, SEAT Spain, and Lamborghini Italy. Introduction to Audi: A German luxury car brand, its logo consists of four interlocking rings. It is now a subsidiary of Volkswagen Group. The Audi Group includes the parent company and its subsidiaries Audi Hungaria, quattro GmbH, as well as Lamborghini Automobili and Cosworth Technology, Audi Brazil, and Audi Senna. Additionally, Audi has production plants in China, Malaysia, South Africa, and other locations. Main Audi models: These include the Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S and RS performance series.
7
2
Share

What is the reason for the P001100 camshaft retarded ignition adjustment?

Fault code P001100 camshaft retarded ignition adjustment is caused by the oil passage filter screen of the camshaft bracket falling off and blocking the oil passage. The camshaft is a component in a piston engine. More information about the camshaft is as follows: 1. Function: Its function is to control the opening and closing of the valves. Although in a four-stroke engine, the speed of the camshaft is half that of the crankshaft, it still generally operates at high speeds and needs to withstand significant torque. Therefore, the design requirements for the camshaft in terms of strength and support are very high, and its material is usually high-quality alloy steel or alloy steel. 2. Design: Since the movement pattern of the valves affects the power and operational characteristics of an engine, camshaft design plays a very important role in the engine design process.
17
0
Share

How to reset the maintenance light on a 2020 Geely Binyue?

2020 Geely Binyue maintenance light reset method is to keep the car's ignition switch in the ON position with the engine off. Below are specific details about the 2020 Geely Binyue: 1. Powertrain: The current Binyue PRO model is equipped with the G-Power260T engine, which shares technology with Volvo's Drive-ET3. 2. Features: It comes with an L2-level intelligent driving assistance system that integrates ICC intelligent cruise control, APA full-automatic intelligent parking, SLIF speed limit reminder function, and a series of other intelligent safety features.
5
1
Share

What brand of battery does XPeng use?

XPeng uses batteries from CATL (Contemporary Amperex Technology Co. Limited). XPeng battery lifespan: The battery lifespan of XPeng vehicles is approximately 6 years. During winter, battery degradation accelerates. To mitigate this, you can pre-charge the vehicle to raise its temperature before driving. After use, utilize the residual heat from the battery pack to charge immediately, which can improve charging efficiency. XPeng battery maintenance: Proper charging time management is crucial for battery maintenance. During usage, accurately determine charging times based on actual conditions, considering factors like frequency of use and mileage. It's advisable to charge daily. When the battery indicator shows a full charge, allow it to charge a bit longer. Daily charging helps keep the battery in a cycling state, extending its lifespan. Avoid deep discharge at all costs. Deep discharge occurs when the battery isn't charged promptly after use. Storing batteries in a deep-discharged state can lead to sulfation, where lead sulfate crystals form on the plates, blocking ion channels and resulting in insufficient charging and reduced battery capacity. The longer a battery remains idle in a deep-discharged state, the more severe the damage becomes.
12
0
Share

How much smaller is the Audi A5 compared to the A4?

The Audi A5 is 5mm shorter, 4mm narrower, and 78mm lower in height compared to the A4. Dimensions and Exterior of the Audi A5: The length, width, and height of the Audi A5 are 4757mm, 1843mm, and 1358mm respectively, with a wheelbase of 2826mm. In terms of exterior design, the integrated grille on the front face highlights Audi's signature characteristics, while the angular headlights and large air intakes enhance the structural effect of the A5's front profile. The rear of the car follows a similar design, with distinctive horizontal lines and large, protruding taillights that seem to extend outward, emphasizing the A5's sporty nature. Dimensions and Powertrain of the Audi A4: The Audi A4 is larger in size, with dimensions of 4762mm in length, 1847mm in width, and 1436mm in height, and a wheelbase of 2825mm. In terms of powertrain, the Audi A4 3.0 comes standard with Audi's patented quattro all-wheel-drive system, which provides double the traction. This system enables the vehicle to automatically, accurately, and promptly distribute the ground force to each wheel when turning or braking on various complex road surfaces, thereby improving the directional stability and traction of the vehicle under challenging conditions.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.