···
Log in / Register

Where is the USB port of the Honda Avancier located?

3 Answers
Darin
07/29/25 11:06pm
The USB port of the Honda Avancier is located in the external audio port section. If the USB port is unresponsive, you need to check whether the USB port is set as the media source in the menu. The main functions of the USB port in a car are: using the standard power supply of the car, the USB port serves as an interface to charge electrical devices or as a fixed power supply interface for electrical devices. The Honda Avancier is an SUV model released by GAC Honda, based on the Concept D concept car, featuring a popular coupe SUV style. In terms of body dimensions, the Honda Avancier measures 4858mm in length, 1942mm in width, and 1670mm in height.
Was this review help?
7
4
Share
MacBriella
08/16/25 1:09am
I drive a 2020 Honda Avancier, and the USB ports are quite prominently placed. When you're in the driver's seat, you can easily spot the small storage compartment with a non-slip mat under the center console—it houses two USB ports, with the left one even marked with a phone symbol. Next to the cigarette lighter power outlet by the gear shift, there's also a 12V socket. The rear USB ports are located below the rear air vents; just flip open the small cover to use them. Last time, my friend found it super convenient to charge from the back seat. But a heads-up: when connecting CarPlay, remember to use the original data cable. I’ve tried off-brand cables before, and they kept disconnecting, which was really annoying. There’s actually another USB port inside the armrest, but it’s tucked deep inside, so you’ll need to bend down to find it.
Was this review help?
1
0
Share
Expand All
DeArabella
10/18/25 6:56am
Last week, I just helped my cousin set up his newly purchased Avancier. The USB port design is quite thoughtful. The most conveniently located ones in the front are two rubber-covered ports in the slanted storage tray under the center console - plugging in a charging cable perfectly holds the phone in place. There's also a hidden port inside the armrest near the driver's side, ideal for powering a dash cam. Rear passengers get charging ports behind a small flip cover on the back of the center armrest, which is especially handy when traveling with kids. Note that port locations might vary slightly between model years - I've seen older versions with rear USBs below the AC controls. Pro tip: use shorter cables to avoid tangling with the gearshift.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What are the steps to replace car coolant?

The steps to replace car coolant are: 1. Open the vehicle's engine compartment hood, and you can see the coolant reservoir in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. Functions of coolant: 1. Provides anti-corrosion protection for cooling system components; 2. Prevents scale buildup, avoiding reduced radiator efficiency; 3. Ensures the engine operates within the normal temperature range. Precautions for using coolant: 1. The coolant level needs to be checked regularly and replenished promptly if it falls below the lower limit; 2. Observe whether the coolant has any turbid sediment, and replace it promptly if there is; 3. Different vehicle models have different coolant colors, and they should not be mixed; 4. Before winter, measure the freezing point of the coolant to prevent it from freezing.
20
4
Share

Where is the reversing radar module located on the Kia K2?

The Kia K2 reversing radar control box is located at the rear of the vehicle. The radar main unit is positioned on the radar head attached to the trunk lid, specifically at the left rear of the trunk, on the side with the lights, mounted on the wheel arch sheet metal above the wheel. The unit with five wires connected to it is the one. Here is additional information: 1. Reversing Radar: Its full name is 'Reverse Anti-Collision Radar,' also known as 'Parking Assist Device.' It mainly consists of ultrasonic sensors, a controller, and a display (or buzzer). 2. Automatic Activation of Reversing Radar: When the gear lever is shifted into reverse, the reversing radar automatically starts working. If the radar detects that the distance to an obstacle behind is too close, the buzzer or display device of the reversing radar will issue a warning to remind the driver to pay attention to the rear distance control.
1
3
Share

What is the actual 0-100km/h acceleration time for the RAV4 2.0L?

The 0-100km/h acceleration time for the RAV4 equipped with a 2.0L engine is 10.9 seconds. Introduction to 0-100km/h acceleration: 0-100km/h acceleration refers to the time taken to accelerate from 0 to 100 kilometers per hour, which is the most intuitive reflection of a vehicle's power. 0-100km/h acceleration is not the universal standard for vehicle power: Among vehicles with the same displacement, models equipped with turbocharged engines generally have a significant advantage in 0-100km/h acceleration because they deliver more powerful output and have a very wide range of maximum torque output, allowing the vehicle to achieve maximum acceleration at very low RPMs. However, 0-100km/h acceleration is not the ultimate standard for reflecting a vehicle's power performance, especially when the acceleration times of two vehicles are close.
6
1
Share

Where is the engine number located on the Dongfeng Tianlong?

The engine number of the Dongfeng Tianlong is located on the front left side of the engine, in the middle, on the flat surface where the engine block meets the transmission housing. It is typically a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found in the following 4 ways: The vehicle's driving license will have the engine number printed, usually on the second-to-last line; The motor vehicle registration certificate will record the engine number; The car purchase invoice will record the engine number; The vehicle purchase tax payment certificate will record the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production number of the engine, and each engine can only have one unique engine number, with no two engines sharing the same number.
4
3
Share

What causes the Cadillac ATSL daytime running lights not to work?

Possible reasons for the Cadillac ATSL daytime running lights not working include the daytime running lights being turned off, a blown fuse for the daytime running lights, wiring harness failure, guide ring driver failure, or issues with the daytime running light bulbs. Below are detailed explanations and solutions: Daytime running lights turned off: The daytime running lights may be disabled in the vehicle settings. Simply enable them in the settings. Blown fuse for the daytime running lights: If both left and right lights are not working, replace the fuse. Wiring harness failure: Park the vehicle and inspect the wiring harness between the headlight control module and the daytime running lights. If the issue persists, visit a professional repair shop. Guide ring driver failure: For example, the driver connector may be loose or poorly connected. Secure the driver connector properly. Daytime running light bulb issue: If the bulb filament has quality issues, its resistance may increase with temperature, causing the working current to decrease and the daytime running light to turn off. Replace the bulb.
7
4
Share

What is required for the six-year exemption from inspection and the two-year label replacement?

For the six-year exemption from inspection and the two-year label replacement, you will need the original vehicle license and a copy of the compulsory traffic insurance policy, among other materials. Documents required for vehicle annual inspection (individual): Original vehicle license, copy of the compulsory traffic insurance policy, photocopy of ID card, and the vehicle. Documents required for vehicle annual inspection (organization): Original vehicle license, copy of the compulsory traffic insurance policy, Organization Code Certificate of the People's Republic of China (with fresh seal), letter of authorization (with fresh seal), photocopy of the agent's ID card, and the vehicle. Note: For vehicles eligible for the exemption from inspection and issuance of the inspection qualification label, you only need to go to the vehicle management office, motor vehicle registration service station, or traffic police squadron to fill out the "Motor Vehicle Inspection Label Application Form" and then receive the motor vehicle inspection qualification label and vehicle license.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.