Where is the USB port of the Baojun 530 located?

1 Answers
Hernandez
07/30/25 4:37am
The USB port of the Baojun 530 is located below the center console panel, equipped with a USB interface and a power supply port, which can be used for downloading the car's system or charging mobile phones. The Baojun 530 is a compact SUV with exterior dimensions of 4690 mm in length, 1835 mm in width, and 1750 mm in height, a wheelbase of 2750 mm, and a fuel tank capacity of 52 liters. The Baojun 530 is powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 147 hp, a maximum power of 108 kW at 5200 rpm, and a maximum torque of 250 Nm between 2200 and 3400 rpm.
Was this review help?
18
3
Share
More Forum Discussions

Can the Kawasaki H2R Outrun an F1 Car?

Depending on the track conditions and the specific F1 model, the answer to whether the Kawasaki H2R can outrun an F1 car varies. Here are some details about the Kawasaki H2R: 1. Body Parameters: The Kawasaki H2R measures 2070*1160*770mm (L*H*W), with a seat height of 830mm and a ground clearance of 130mm. 2. Vehicle Performance: The Kawasaki H2R is equipped with a 998cc, 4-stroke, liquid-cooled engine, delivering a maximum horsepower of 310 HP, a peak power output of 228 kW, and a maximum torque of 165 N·m. Thanks to its supercharger technology, the H2R can easily reach 400 km/h when the electronic speed limiter is disabled.
15
2
Share

How to Maintain the Battery?

Methods for maintaining the battery include: 1. Regularly clean the dust and oil stains from the car battery terminals and apply specialized grease to protect the wiring harness; 2. Periodically inspect the battery accessories and connecting circuits; 3. After turning off the car, minimize the use of electrical equipment inside the vehicle; 4. Check the car battery through the observation hole on the battery and replace it regularly; 5. If the vehicle is not used for an extended period, start the car periodically. The functions of the battery are: 1. To provide the starting current to the starter when starting the engine; 2. To assist the generator in supplying power to electrical equipment when the generator is overloaded; 3. To supply power to electrical equipment when the engine is idling; 4. To protect the electrical appliances used in the car.
11
5
Share

What are the four modes of BYD Qin DM-i?

BYD Qin equipped with the second-generation DM technology has four working modes, namely EV+ECO, EV+SPORT, HEV+ECO, and HEV+SPORT. Especially in HEV+ECO mode (under different working conditions, different power distributions are made to achieve optimal comprehensive economy.), free switching can be achieved. The following are the relevant details: 1. Starting speed: When the starting speed is below 40KM/H, it is driven by pure electric power; when the speed exceeds 40KM/H and the engine is in the economic fuel consumption zone (1500-3500 rpm), it is driven by fuel; 2. During acceleration: During acceleration or climbing, the engine speed gradually increases, and the motor responds faster than the engine, responding before the engine leaves the economic fuel consumption zone, assisting the engine to keep it within the economic fuel consumption zone.
15
2
Share

How is liability determined when a leading vehicle changes lanes and is hit by a following vehicle?

During driving, the liability division when a leading vehicle changes lanes and is hit by a following vehicle: 1. The leading vehicle changes lanes illegally: According to relevant laws in China, how liability is divided when a leading vehicle changes lanes and is hit by a following vehicle depends on the specific circumstances. If the leading vehicle changes lanes illegally, such as changing lanes in a solid line section or a no-lane-change section, the leading vehicle generally bears full responsibility. 2. The following vehicle fails to maintain a safe following distance: If the lane markings are clear, and the leading vehicle has successfully and smoothly merged into the lane, but the following vehicle fails to fulfill its responsibility for safe driving and hits the leading vehicle, it constitutes a rear-end collision, and the following vehicle bears full responsibility.
15
0
Share

Where is the diagnostic port of Huansu H2 located?

The diagnostic port of Huansu H2 is located inside the interior trim panel under the steering wheel. Below are the detailed introductions: 1. Introduction: The BAIC Huansu H2 is the first MPV independently developed by BAIC Huansu. As a premium model crafted over two years by BAIC Huansu, the H2 highlights its 6AMT transmission and intelligent technology configurations as core selling points, setting a new benchmark for compact MPVs in the domestic market. 2. Market Positioning: As a stylish and intelligent compact MPV, the BAIC Huansu H2 targets the grassroots well-off population whose careers and families are in the ascendant phase. Additionally, this model holds significant appeal for young consumer groups.
20
2
Share

How often should the spark plugs of Honda Lingpai be replaced?

Honda Lingpai spark plugs should be replaced every two years or 40,000 to 60,000 kilometers. The Honda Lingpai is a compact 4-door, 5-seater sedan with body dimensions of 4756mm in length, 1804mm in width, and 1509mm in height, a wheelbase of 2730mm, and a fuel tank capacity of 40 liters. The Lingpai is equipped with a 1.5L engine and an eCVT continuously variable transmission, with a maximum power speed of 6000 rpm and a maximum torque speed of 5000 rpm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.