Where is the USB port of Emgrand GS located?

1 Answers
LaArthur
07/30/25 10:14am
There are two USB ports in the Emgrand GS. One is located in the box between the driver and front passenger seats, and another one is in the rear seats. The USB interface follows a globally unified standard. Besides being used for charging mobile phones via charging cables, it can also accommodate small night lights, making it convenient to find things in low-visibility evenings. The Emgrand brand carries forward and breaks through the legacy of Geely Automobile. Its emblem design exudes elegance and strong international characteristics. While shedding the historical baggage of Geely's original image, it effectively inherits excellent inherent cultural genes. The dignified and noble connotation of the emblem will efficiently help the Emgrand brand develop a broad and stable market.
Was this review help?
11
2
Share
More Forum Discussions

Where is the Transfer Case Located in a 4WD Vehicle?

The transfer case in a 4WD vehicle is located behind the transmission. It is a device that distributes the engine's power, directing it either to the rear axle or simultaneously to both the front and rear axles. The transfer case is a crucial transmission component in 4WD vehicles. Below is some related information about the transfer case: 1. After the engine's power passes through the transmission, it is directly connected to the rear axle via the driveshaft. The transfer case extends an additional output from the transmission and uses a silent chain to transfer power to the front axle's output shaft. 2. It enhances the vehicle's off-road capability and offers high reliability. Switching to two-wheel drive mode on smooth roads can help reduce fuel consumption.
12
1
Share

Why Can't Audi Detect Obstacles?

Check if there is any dirt on the reversing probe. If there is, clean it off. If the problem persists, it may be due to issues with the related wiring or the probe itself. Below is an introduction to automotive detectors: 1. Vehicle Detector: Vehicle detectors are the primary equipment for ITS to obtain real-time road usage conditions. Through vehicle detectors, a lot of information can be collected, such as vehicle passage, presence, speed, length and model, queue length, road occupancy rate, etc. 2. Inductive Loop Detector: Inductive loop detectors are the most widely used detectors. An inductive loop detector consists of two parts: the detection circuit and the inductive loop sensor.
20
1
Share

Why Does Audi Have Four Rings?

The four rings of Audi represent the four companies: Audi, Horch, Wanderer, and DKW. Below is an introduction to the Audi brand: 1. Origin of the Four Rings Logo: The history of the German Audi company in manufacturing cars and motorcycles dates back to the 19th century. Originally, four automobile companies in Saxony—Audi and Horch in Zwickau, and Wanderer in Chemnitz-Siegmar—made outstanding contributions to the advancement of the German automotive industry at that time. These four companies merged in 1932 to form Auto Union AG. In terms of car production, Auto Union was the second-largest automobile manufacturer in Germany at the time, with a logo of four interlinked rings representing the four merged companies, marking the first appearance of the four-ring emblem in the world. 2. Automotive Brand: Audi is an internationally renowned luxury car brand, with its headquarters located in Ingolstadt, Germany.
20
5
Share

Why don't 4S shops use torque wrenches?

4S shops do not use torque wrenches because the torque is not accurate. They can only tighten by the number of turns. The following is an introduction to torque wrenches: 1. Introduction: A torque wrench, also known as a torque spanner, moment wrench, or torque tool, is a type of wrench generally divided into two categories: electric torque wrenches and manual torque wrenches. 2. Principle: Torque is the product of force and distance. When tightening threaded fasteners such as screws, bolts, and nuts, it is necessary to control the applied torque to ensure the fastener is secure without damaging the threads due to excessive torque. Hence, a torque wrench is used for this operation. 3. Application: Torque wrenches are used to tighten bolts. High-strength bolts can be divided into two types: twist-off type and large hexagon type. According to national standards, the twist-off type high-strength bolts include M16, M20, M22, and M24.
8
4
Share

What is the fuel consumption per kilometer for the Polo 1.6 automatic?

According to official data, the POLO 1.5L model accelerates from 0 to 100 km/h in 12 seconds. Factors affecting the vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Vios FS has a maximum torque of 138 Nm and accelerates from 0 to 100 km/h in 11.2 seconds. The POLO 1.5L has a torque of 145 Nm and accelerates from 0 to 100 km/h in 12 seconds. Transmission efficiency: The transmission is the medium for power transfer and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The POLO 1.5L is equipped with a manual-automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Vios FS has a power-to-weight ratio of 99 Hp/T and accelerates from 0 to 100 km/h in 11.3 seconds. The POLO 1.5L has a power-to-weight ratio of 99 Hp/T and accelerates from 0 to 100 km/h in 12 seconds.
13
4
Share

Why Do 4S Stores Charge License Plate Fees?

4S stores charge license plate fees because the commission earned from selling a car is limited. Below is an introduction to vehicle license plates: 1. Introduction: A license plate, commonly known as a vehicle plate, is a board made of materials such as aluminum, sheet iron, plastic, or paper, which is mounted on the front and rear of a vehicle. It displays the vehicle's registration number, registration region, and other relevant information. 2. Function: License plates serve to number and register vehicle information. Their primary purpose is to identify the region to which the vehicle belongs and to trace the vehicle's owner and registration details through the plate. 3. Temporary License Plates: Temporary license plates are issued by the vehicle management department of the public security bureau when a car has not yet been officially registered due to pending procedures. The use of temporary plates is subject to time and regional restrictions.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.