Where is the USB port of Baojun 730 located?

2 Answers
VonDonovan
07/25/25 7:04am
The USB port of Baojun 730 is located in the storage compartment under the center console. You can see it by opening the cover. Here is some information about the USB port: 1. The car USB port can be used to read USB drive information for the car entertainment system, charge mobile phones, etc. After inserting the USB drive into the USB port, you can play the songs in the USB drive by opening the music player in the car entertainment system. 2. Besides the USB port, the cigarette lighter can also be used to charge mobile phones, but a power converter is needed. Precautions for using the car charger: 1. Do not use the car charger in a humid environment. 2. Do not store the car charger in a humid environment. 3. The suitable temperature for use is 0-45℃. 4. Keep it away from children. 5. Avoid lightning strikes. 6. Unplug the charger in time after charging.
Was this review help?
3
5
Share
MacAlexandra
08/10/25 6:24pm
I used to drive a Baojun 730, and the USB port was located right below the center console, very close to the audio buttons, making it easy to find. I often plugged in a USB drive to listen to music or play navigation sounds—it was within easy reach, so I didn’t have to bend down while driving, which would be dangerous. If you can’t find it at first, you can check the front storage compartments or the armrest box after parking, as some models place it there. Remember to keep the port clean, as too much dust may cause poor contact. The support for MP3 format is quite handy, but avoid using outdated file types. After using it for so long, I think the location is well-designed and user-friendly, not obstructing the driving view. It’s safer to plug and unplug when parked.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Why does the car shake a little when starting?

The degree of shaking during car startup has become an important indicator to measure the level of a car. If you notice severe shaking, it indicates an abnormal condition in the vehicle, and you should stop and inspect it promptly to avoid more serious dangers. Below are the reasons for car startup shaking: 1. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes starting difficult, and it becomes easier only after the carbon deposits have absorbed enough gasoline to reach saturation. 2. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction force for combustion, enriching the air-fuel mixture. The engine's combustible mixture alternates between lean and rich, causing idle shaking after a cold start. Solution: Clean the fuel system and check if the idle air control valve has carbon buildup; it should be thoroughly cleaned.
7
3
Share

What to Do When the Transmission Fails?

Transmission oil temperature should not exceed 120 degrees, with 80 or 90 degrees being optimal. Prolonged exposure to temperatures higher than this can accelerate the degradation of the transmission oil's composition and usability. When the oil temperature reaches 143 degrees, the transmission oil is likely to lose its lubricating properties, which can cause internal transmission components to fail due to excessive friction and overheating. Below is additional information about transmissions: 1. As one of the "three major components" in a vehicle, the quality of the transmission directly affects the car's handling and safety. If the transmission fails, it can easily lead to traffic accidents. Many transmission failures are caused by high temperatures and overheating, requiring immediate cooling. 2. According to data analysis, over 90% of automatic transmission failures are due to high temperatures and overheating. Excessive transmission oil temperature can lead to a series of transmission problems, and in severe cases, it can cause transmission damage or even traffic accidents.
7
1
Share

What are the differences between the Haval Chitu and First Love?

Haval First Love and Chitu are very close in size, with identical wheelbases. The difference in dimensions between the two models mainly lies in the body width, which is primarily due to the kit and does not affect the overall class and interior space. Below are the differences between Haval First Love and Chitu: 1. In terms of body dimensions, the Haval Chitu measures 4470/1898/1625mm in length, width, and height, with a wheelbase of 2700mm. Its dimensions are roughly equivalent to the Haval First Love, positioning it as an entry-level compact SUV. The First Love measures 4472/1841/1619mm in length, width, and height, with a wheelbase of 2700mm, positioning it as a compact SUV. 2. In terms of power, the Haval Chitu is equipped with a 1.5T engine, available in high and low power tuning versions, with maximum power outputs of 184 horsepower and 150 horsepower respectively. It is paired with a 7-speed wet dual-clutch transmission. The Haval First Love is equipped with a 1.5T engine, delivering a maximum output power of 110kW (150 horsepower). It is paired with a 7-speed dual-clutch transmission.
5
2
Share

What does the Volkswagen EPC display indicate as a fault?

Volkswagen EPC display indicates an electronic throttle fault. The reasons for the EPC display are as follows: 1. Dirty throttle body with excessive carbon deposits. 2. Intake system failure, such as leaks or blockages. 3. Use of substandard fuel. Solutions are as follows: 1. Clean carbon deposits from relevant parts. 2. Use qualified fuel and clean the throttle body. Related information is as follows: 1. The dimensions of the Volkswagen Polo are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. It is equipped with a 5-speed manual transmission and has a top speed of 190 km/h. 2. The fuel tank capacity of the Volkswagen Polo is 42.5L, with a maximum horsepower of 113 hp, and the tire specification is 185/65R15.
1
5
Share

What does OBD on a car mean?

OBD on a car stands for On-Board Diagnostics, a system that continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a fault occurs in the system, the malfunction indicator lamp or check engine warning light will illuminate, and the powertrain control module will store the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly identify the nature and location of the fault. OBD monitors systems and components such as the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, etc., in real-time.
17
3
Share

Is car film applied from the outside or the inside?

Car film is applied on the inside. Car film includes front windshield film, rear windshield film, window film, and sunroof film, all of which are applied to the inner side of the windows. Car film refers to applying a thin layer of material, also known as solar film or heat insulation film, to the front and rear windshields, side windows, and sunroof of a vehicle. Additional information: 1. Avoid opening windows and washing the car within three days after applying the film. Try to minimize opening windows for a week to prevent moisture from causing displacement, peeling, or detachment of the film. 2. Do not turn on the rear window defogger for a week, as moisture can also negatively affect the defogger lines.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.