Where is the USB port located on the Baojun 310?

2 Answers
SanAnastasia
07/24/25 2:21am
The USB port of the Baojun 310 is located next to the cigarette lighter. Simply open it to see the USB interface. The car USB can be used to read USB drive information for the car entertainment system, charge mobile phones, and other functions. When a USB drive is inserted into the car's USB port, the interface will automatically recognize the contents of the USB drive, allowing for direct use provided the format is correct. How the USB port works: The in-car power supply (DC-12V or DC-24V) is converted to DC-5V, and then the DC-5V output is used to charge corresponding devices via the unified USB interface. Since different devices have varying power requirements, the power output of car USB chargers also varies significantly, primarily differing in the current output. Precautions for using the USB port: Charging should only be done when the car engine is running to avoid damage to devices due to unstable power supply. Avoid connecting too many devices at once, as overloading may damage the car battery and alternator.
Was this review help?
15
1
Share
HeidiLynn
08/10/25 9:58pm
Regarding the USB port location of the Baojun 310, I noticed while driving that it's inside a small storage compartment beneath the center console area, just a bit in front of the gear lever—quite easy to spot. I usually use it to charge my phone and connect a USB drive for music playback, which is pretty convenient. However, its position is somewhat low, requiring you to bend down to plug or unplug devices, which might be a minor drawback. I've also encountered issues with the port becoming loose, so I recommend handling it gently, regularly cleaning out dust to ensure good contact. Additionally, the location may vary slightly across different trim levels; my friend's base model has the USB port inside the glove compartment. If you can't find it, check the illustrations in the vehicle manual or post a photo on a forum to ask other owners. All in all, though small, this feature is crucial for daily driving, especially during long trips when keeping your devices charged is essential.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

How many kilometers can a car tire generally last?

Generally, car tires can last about 80,000 kilometers. If the mileage has reached 80,000 kilometers, it is recommended to replace the tires. If the mileage is lower, for example, only 30,000 to 40,000 kilometers after 6 years, a basic inspection of the tires is necessary. Check if there are obvious cracks on the tire sidewalls. If cracks are present, the tires should be replaced promptly. If the car is only driven at low speeds on city roads, the tires can continue to be used, but not for more than 7 years, as prolonged use can lead to tire aging. Note: Choose the right tires: When replacing tires, it's important to select the appropriate ones. The specifications of the new tires should match those of the other tire on the same axle, including speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. Replace the valve stem as well: After replacing the tires, the aging cycles of the new tires and valve stems differ. During the lifespan of the new tires, the valve stems may develop issues, which are not easily noticeable. Therefore, it's best to replace the valve stems at the same time as the tires.
12
0
Share

Why does the ABS warning light stay on after installation on a motorcycle?

The reason why the ABS warning light stays on after installation on a motorcycle may be due to faults in components such as the wheel speed sensor, ABS wiring, ABS pump, pressure regulating solenoid valve, or the ABS computer. How ABS works: During braking, the ABS quickly determines the wheel lock-up state based on speed signals from each wheel speed sensor, closing the normally open input solenoid valve on the wheel that begins to lock up to maintain braking force. If the wheel continues to lock up, the normally closed output solenoid valve opens, allowing brake pressure on that wheel to rapidly decrease through a direct connection to the brake fluid reservoir, preventing complete wheel lock-up due to excessive braking force. This keeps the braking state at the optimal point (20% slip rate S), achieving the best braking performance and maximum driving safety. The role of ABS: It maximizes the effectiveness of the brakes, reducing braking time and distance. It effectively prevents vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. It allows steering during emergency braking, providing excellent steering control. It avoids severe friction between the tires and the ground, reducing tire wear.
8
4
Share

Why Do 4S Stores Not Allow Customers to Watch During Maintenance?

The reason why 4S stores do not allow customers to watch during maintenance is that the natural environment during vehicle repair and maintenance is not particularly clean. The maintenance area is where vehicles come and go. If the owner is accidentally hit by a car in the workshop, the responsibility is unclear. Maintenance Environment: If a mechanic accidentally dirties their clothes during maintenance, it would be unpleasant. Owners are not allowed into the workshop to avoid interfering with the maintenance work. It can be said that 4S stores are currently the most reliable in after-sales maintenance, and there will be no tampering with the vehicle during the process, so owners can basically relax and drink tea in the lounge. Of course, there are exceptions. Maintenance Location: For the safety of the owners, 4S stores will not allow them to enter the maintenance area and will direct them to the lounge to rest. The primary reason most 4S stores prohibit owners from entering the maintenance area is for their own safety. 4S stores follow standardized service procedures, which include directing customers to the lounge, reflecting the high-quality service of 4S stores. Owners can also enjoy good rest and entertainment during maintenance and repairs. Additionally, there are many small vehicles inside the workshop, making it a hazardous environment.
19
3
Share

What Causes Difficulty in Starting a Motorcycle Carburetor When Cold?

Motorcycle difficulty in starting when cold but normal when warm can be attributed to the following reasons: Poor fuel quality: Often, low-quality fuel has poor volatility, especially in winter when temperatures are low. During cold starts, the engine block temperature is low, making fuel atomization difficult. This affects the proper mixing of fuel injected into the cylinder with air, leading to starting difficulties or even failure to start. Lower temperatures: The colder it is, the more fuel is required for a cold start, and carbon deposits can significantly affect the ease of cold starting. Carbon deposits in various parts of the engine can adversely affect its normal operation. For example, excessive carbon deposits in the combustion chamber can increase the compression ratio, creating multiple hot spots that lead to pre-ignition and knocking, reducing the engine's lifespan. Carbon deposits on the valve and its seat surfaces can cause the valve to close improperly, leading to gas leakage, difficulty in starting the engine, reduced power, and increased susceptibility to valve burning. Spark plug issues: Delayed replacement of spark plugs is another common factor. Cold starts require higher ignition energy, and after a certain mileage, the electrode gap of the spark plug widens. If it exceeds the standard, the spark energy produced will significantly weaken, making it difficult to ignite the air-fuel mixture in the cylinder (commonly known as misfiring), naturally making it very hard to start.
11
2
Share

Can someone else's driver's license be used for point deduction now?

Points cannot be deducted using someone else's driver's license; otherwise, the "one vehicle, multiple licenses" point deduction system will automatically trigger an alert. If one driver's license is used to handle violations for multiple vehicles or one vehicle uses multiple driver's licenses to handle violations beyond a certain number of times, the system will automatically alert the traffic police department. Additionally, the non-on-site violations processed by the involved party will be uploaded to the Ministry of Public Security's supervision platform. This effectively prevents the misuse of driver's licenses to handle violation records. Article 60 of the "Public Security Administration Punishment Law" stipulates a detention of five to ten days and a fine ranging from 200 to 500 yuan for the following acts: individuals under legal control, deprived of political rights, on probation, temporarily serving sentences outside prison, or under criminal compulsory measures who violate laws, administrative regulations, or the supervision and management regulations of relevant State Council departments. The traffic police department reminds: if the same driver handles violations for more than three different license plate vehicles not owned by themselves within one year, or if more than three drivers handle violations for the same license plate vehicle, they will be listed as key suspects for substitution in violation handling. Their traffic violation handling services will be suspended, and the suspected substitution behavior will be investigated. The processing period for traffic violations depends on the penalty notice, with the following scenarios: If a vehicle commits a violation and is caught by traffic police on the spot, the police will issue a penalty notice immediately. Such notices must be paid at a designated bank within 15 days. Failure to pay within 15 days will result in a 3% late fee per day, but the total late fee cannot exceed the penalty amount. After a traffic accident, the police determine responsibility based on the overall situation. The party at fault must pay the penalty within 15 days. For violations captured by traffic cameras, such as speeding, running red lights, crossing solid lines, illegal turns, or driving in the wrong direction, which are found online or at the traffic police station, there is no strict time limit for processing. However, they must be resolved before the vehicle's annual inspection; otherwise, the inspection will not be approved. If a vehicle is parked illegally and receives a ticket from the traffic police, the penalty can be temporarily ignored and processed together before the vehicle's inspection.
19
0
Share

What is the difference between Blue Shell and Gray Shell fully synthetic oils?

Blue Shell and Gray Shell fully synthetic oils differ in terms of composition, replacement intervals, and application scope. Gray Shell oils are all fully synthetic, while Blue Shell oils include both fully synthetic and semi-synthetic varieties. The fully synthetic Gray Shell oil has a higher grade than the semi-synthetic Blue Shell oil, making Gray Shell oil slightly more expensive than Blue Shell oil.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.