Where is the USB port located in the Trumpchi GA4?

2 Answers
OAlivia
07/30/25 1:56am
The USB port is located inside the center armrest, where you can insert and use it. Inserting a USB drive to play music is just selecting the audio source. If you were listening to music from the USB drive during your last drive, it will continue to play from the USB drive when you start the car again, and the song name will be displayed in a message window on the central control screen. Here is some relevant information about the Trumpchi GA4: 1. System Configuration: The Trumpchi GA4 is equipped with the Bosch 9.1 version ESP (Electronic Stability Program) vehicle electronic stability control system, HHC (Hill Hold Control) hill start assist system, EPB (Electric Parking Brake) electronic parking brake, and Auto Hold automatic parking function, among other intelligent safety driving assistance systems. These systems help maintain stable control of the vehicle during driving, significantly reducing the likelihood of wheel slippage on slippery roads. They provide timely feedback and take measures to address obstacles ahead, proactively eliminating potential safety hazards and ensuring vehicle safety at all times. The 360° panoramic parking imaging system, unique in its class, provides comprehensive monitoring of driving conditions, displaying a bird's-eye view of the 360° environment on the central control screen. This solves the problem of poor visibility in rainy weather, allowing for clear vision and safe driving even in the rain. 2. Safety Configuration: The Trumpchi GA4 also features comprehensive and robust passive safety configurations: it adopts the GAC high-strength body design and is built to meet the C-NCAP 5-star collision standard. The proportion of high-strength steel above 600MPa reaches 55%, with the passenger compartment strength reaching 1500MPa, far surpassing domestic models in the same class. It is also equipped with six airbags, rare in its class, along with front and rear pre-tensioned force-limiting seat belts, doubling driving safety.
Was this review help?
9
2
Share
LukasAnn
08/15/25 7:51am
I've been driving the Trumpchi GA4 for several years and find the USB port quite handy. It's usually located in the center console area between the driver and front passenger seats, inside a small storage compartment near the air conditioning controls below. Just plug in a data cable to easily connect a USB drive for music or charging. I think the placement is well-designed - easily reachable without obstructing vision, making it safe to change songs while driving. If you have a newer model, there might be an additional port inside the center armrest for passengers. Don't forget to check the glove compartment too, as some cars hide it there. Before inserting a USB drive, remember to format it first - I learned this the hard way when mine wasn't recognized initially. Playing curated music collections during drives delivers excellent sound quality, and you can charge your phone directly too, which is perfect for long trips. Once you're familiar with its location, you'll never waste parking time fumbling around again.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What does the car A/C mode mean?

Car A/C mode refers to air conditioning cooling. More information about the A/C button is as follows: 1. The A/C button is the air conditioning cooling button. When pressed, the car air conditioning starts working, and the air blown by the blower is cold. 2. The A/C button can control the switch of the compressor. The compressor is one of the main components of the car air conditioning cooling system, which can compress and deliver refrigerant vapor. 3. The A/C button is the control button to start the air conditioning compressor. The purpose of starting the air conditioning compressor is to cool. In winter, when the temperature is lower and the interior temperature drops faster, there is no need to turn on the A/C button.
6
0
Share

Why do cars need regular maintenance?

Vehicle maintenance is to ensure that the vehicle is always in optimal working condition. Regular vehicle inspections can detect faults early and prevent problems before they occur. Each time you bring your car in for maintenance, the standard maintenance process includes tire tread inspection, chassis inspection (brake pads, brake discs, suspension arms, underbody, fluid leaks, etc.), lighting inspection, and engine fluid level inspection. The purpose of these inspections is to prevent problems before they arise. Below is an introduction to the relevant maintenance items: 1. Gasoline filter, air filter, and cabin air filter: Generally replaced every 20,000 kilometers. 2. Coolant (antifreeze) is recommended to be replaced every 20,000 kilometers. Insufficient coolant concentration can cause the engine to overheat. 3. Spark plugs are recommended to be replaced every 30,000-40,000 kilometers. Worn-out spark plugs can lead to insufficient power or engine vibration. 4. Transmission fluid is generally replaced every 50,000-60,000 kilometers. Some transmissions are maintenance-free for life and only require fluid top-ups as needed. Insufficient transmission fluid can cause gear shifting issues or even prevent shifting. There are multiple types of ATF (Automatic Transmission Fluid), and different types cannot be mixed. Before replacement, please refer to the owner's manual.
2
0
Share

What to Do When a Key Breaks in the Lock?

Here are the solutions for when a key breaks inside the lock: 1. If the key breaks inside the lock and you have no tools at hand, immediately call a locksmith, though you will need to pay a fee. 2. Borrow a pair of pliers from a neighbor, provided that a small part of the broken key is still sticking out. Gently grip it with the pliers and carefully pull the broken key out. 3. If you have a small, pointed tweezer, insert it into the lock to remove the broken key. 4. Apply some 502 glue to the broken end of the key and quickly press it against the key inside the lock. Wait for five minutes, then gently pull—the broken key might come out with it.
3
1
Share

Where to Add Windshield Washer Fluid for Yuan?

Windshield washer fluid for Yuan is added under the hood. First, open the hood, locate the windshield washer fluid filler port, and pour the fluid directly into it. The performance characteristics of automotive windshield washer fluid are as follows: 1. Windshield cleaning performance: Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving cleaning and stain removal. 2. Anti-freeze and anti-fog performance: It can significantly lower the freezing point of the liquid, thus providing anti-freeze effects and quickly dissolving frost. A single-molecule protective layer forms on the glass surface, preventing the formation of fog droplets and ensuring the windshield remains clear and transparent with a clear view. 3. Lubrication performance: It has relatively high viscosity, providing lubrication to reduce friction between the wiper and the glass, preventing scratches.
10
0
Share

What does the brake pedal mean?

Here is the relevant introduction about the brake pedal: 1. As the name suggests, the brake pedal is the pedal that limits power, i.e., the pedal of the foot brake (service brake), used for deceleration and stopping. The brake pedal, also known as the "foot brake pedal," is generally operated by the right foot. The brake pedal is located at the bottom of the driver's compartment, to the left of the accelerator pedal, and serves as the control device for the service brake. 2. It is one of the five major control components in automobile driving and is used very frequently. How well the driver controls it directly affects driving safety. There is a small pedal connected to the brake lever above the brake, hence this pedal is also called the "brake pedal." There is also a small pedal above the clutch, called the clutch pedal. The clutch is on the left, and the brake is on the right (aligned with the throttle, with the throttle on the right).
12
0
Share

Usage Method of Piston Ring Pliers

Usage Method of Piston Ring Pliers: 1. Piston ring pliers are a specialized tool designed for installing and removing piston rings. When using the pliers, clamp the ring opening with the jaws of the pliers, then gently and evenly squeeze the handles to slowly contract the pliers. This action gradually expands the piston ring, allowing it to be removed from or installed into the piston ring groove. 2. When using piston ring pliers, apply force evenly to avoid breaking or damaging the piston ring due to excessive force, and to prevent hand injuries.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.