Where is the USB port located in the Odyssey?

What is a Manual Transmission?

Manual transmission (MT), also known as manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear meshing device inside the transmission, thereby altering the gear ratio to achieve speed variation. The working principle and advantages of manual transmission are as follows: Working Principle of Manual Transmission: By using the shift fork, the transmission ratio (gear ratio) of the meshing gears is changed, thereby altering the driving torque to suit different operating conditions. Advantages of Manual Transmission: In terms of purchase price, for the same brand and model, manual transmission cars are cheaper than automatic transmission cars. In terms of maintenance costs, manual transmission cars are significantly cheaper to repair than automatic transmission cars. Since automatic transmission technology is a foreign product, domestic research and development on automatic transmission cars are not yet mature, resulting in higher maintenance costs compared to manual transmission cars. In terms of driving pleasure, manual transmission cars allow drivers to truly experience the joy of driving and the fun of controlling the car. Automatic transmission cars lack these sensations, as you can drive away simply by engaging the gear. Apart from the steering wheel, brake, and accelerator, everything else is controlled by the computer, giving the feeling that the car is controlling the driver.

12

4

Share

How Many Times Do You Need to Retake the Reverse Parking Test After Failing the Four Items Twice?

Four items and two failures require one retake of the reverse parking test. The four items in Subject Two refer to right-angle turns, reverse parking, curve driving, and parallel parking. The details are as follows: Reverse Parking: Main points for deduction in reverse parking: driving over the line during reverse parking, the car not entering the parking space, exceeding the time limit, and not following the designated route. After the new regulations were implemented, a time limit of 210 seconds was added for reverse parking. Exceeding this time results in a failing score. Parallel Parking: The main points for deduction in parallel parking involve the turn signal, maintaining a 30cm distance from the side, and driving over the line. Right-Angle Turns: The main points for deduction in right-angle turns involve the turn signal and driving over the line. Curve Driving: This item is relatively simple, with the main point for deduction being driving over the line with the wheels.

8

4

Share

What car brand is JCW?

JCW stands for JOHN-COOPER-WORKS, which is the high-performance version of Mini. Here are the detailed specifications: 1. This car is equipped with a 1.6L direct injection engine, featuring turbocharged intake, with 4 cylinders arranged in an L-shape, a maximum engine speed of 6000rpm, producing a maximum horsepower of 211Ps and a peak torque of 260N·m. 2. JCW is the high-performance version of Mini, with different engine tuning for stronger power, which is the highlight of JCW models. 3. All new models are equipped with a high-power 1.6T turbocharged engine, with front-wheel-drive models tuned to 155kW and a peak torque of 260Nm, which can reach 280Nm in overboost mode. 4. All-wheel-drive models are tuned to 160kW with a peak torque of 280Nm, reaching 300Nm in overboost mode. 5. In terms of transmission, all five new models are matched with a more user-friendly 6AT transmission, with no manual transmission option available. 6. The handling differences between models are minimal, with front MacPherson independent suspension and rear multi-link independent suspension. 7. Both front and rear tires share the same specification: 225/45R18.

2

0

Share

What is the reason for the Volkswagen Lavida occasionally stalling without any fault codes?

The engine's anti-theft system or idle system may have issues. Two possibilities: There might be a problem with the engine's anti-theft system, causing the car to automatically shut off after two seconds of starting; or there could be an issue with the engine's idle system, preventing it from properly controlling the vehicle's operation. Identification method: When this problem occurs, start the car and hold the throttle to see if the car can run normally. If it can, then it's an idle system problem; if not, then the anti-theft system is at fault. Inspection methods: Check whether the battery voltage is normal and inspect related circuits, including the starter. Check if the fuel tank has fuel, whether the fuel pump is working properly, and if the fuel line is clogged due to the use of poor-quality gasoline. Check if the spark plugs and ignition coils are functioning normally, and perform resistance tests. Inspect whether the air intake is normal, if there are any blockages or leaks, and if the throttle body is too dirty.

1

0

Share

Why did BAIC Huansu stop selling?

BAIC Huansu stopped selling due to poor sales. Here are the specific details about BAIC Huansu: Powertrain: The Zhangi series is equipped with a 1.5-liter turbocharged engine. The engine code is 4A91T, with a maximum power of 100kW and a maximum torque of 200 Nm. The maximum power speed is 5500 rpm, and the maximum torque speed ranges from 2000 to 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head. It is paired with a 5-speed manual transmission. Suspension: The front suspension of this model uses a leaf spring non-independent suspension, and the rear suspension also uses a leaf spring non-independent suspension.

5

3

Share

How to Use the One-Button Start in the Binyue?

The correct method to start the Binyue: 1. First, press the one-button start key. 2. After the ACC light turns on, press the start key again. 3. At this point, the one-button start key light will illuminate, indicating that the car has started. 4. After the car completes its self-check, press the brake and then press the one-button start key to fully start the car. Introduction to the Binyue: 1. The Geely Binyue is equipped with a 1.5T three-cylinder engine, delivering a maximum power of 177 horsepower, paired with a 7-speed wet dual-clutch transmission, achieving a 0-100 km/h acceleration time of 7.9 seconds. 2. The car has a body length of 4330mm, width of 1800mm, height of 1609mm, and a wheelbase of 2600mm. 3. The Binyue features the GKUI Geely Smart Ecosystem and T-BOX remote control system, allowing drivers to use voice commands to control the air conditioning, sunroof, navigation, and more. It also supports remote car start, air conditioning activation, and window control via a mobile app. 4. The overall style of the car leans towards sporty and fashionable, with a double waistline design on the side of the body that visually elongates the car, giving it a strong sense of line dynamics.

4

1

Share

Where is the USB port located in the Odyssey?

What is a Manual Transmission?

How Many Times Do You Need to Retake the Reverse Parking Test After Failing the Four Items Twice?

What car brand is JCW?

What is the reason for the Volkswagen Lavida occasionally stalling without any fault codes?

Why did BAIC Huansu stop selling?

How to Use the One-Button Start in the Binyue?

Can China III Motorcycles Still Be Transferred and Licensed?

Where is the air pump located in the Mercedes-Benz GL450?

Will Insurance Not Cover Modified Front Splitters?

Why Does the RPM Increase When Downshifting?