Where is the USB port located in the Lynk & Co 03?

1 Answers
ValerieAnn
07/30/25 10:39am
The USB port in the Lynk & Co 03 is located under the interior cover panel in front of the gear shift lever. When opened, you can see the USB port and the cigarette lighter. The Lynk & Co 03 has only two USB ports in the center armrest that can read USB drives; the rest are charging ports. These are universal USB ports for connecting USB drives, MP3 players, and other USB devices. The Lynk & Co 03 is the first sedan product under the Lynk & Co brand and the first sedan built on the CMA (Compact Modular Architecture) platform. In terms of exterior design, the Lynk & Co 03 continues to use the brand’s signature design language, featuring a distinctive double-layer front fascia. Positioned as a trendy sports sedan, it comes in six variants across three design styles: Pure, Hybrid, and Dynamic.
Was this review help?
13
0
Share
More Forum Discussions

How Long Does It Take to Charge the BYD Qin?

The BYD Qin takes 5 to 6 hours to charge fully. After a full charge, it can travel up to 700km in hybrid mode and 70km in pure electric mode. Taking the 2020 BYD Qin as an example, it is a compact car with body dimensions of 4675mm in length, 1770mm in width, and 1500mm in height, a wheelbase of 2670mm, a trunk capacity of 450 liters, and a curb weight of 1630kg. The 2020 BYD Qin features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a permanent magnet motor that delivers a maximum power of 100kW and a maximum torque of 180Nm, paired with a single-speed fixed gear ratio transmission.
4
5
Share

What are the causes of door squeaking in the Baojun 310?

The causes of door squeaking in the Baojun 310 are: 1. Presence of foreign objects inside the door trim panel; 2. Loose trim panel or audio system; 3. Rust on the door hinges; 4. Aging of the door sealing strips; 5. Poor contact, excessive gap, or insufficient lubrication in the door lock mechanism. Taking the 2020 Baojun 310 as an example, it is a compact car with body dimensions of 4032mm in length, 1680mm in width, and 1450mm in height, a wheelbase of 2550mm, a fuel tank capacity of 30 liters, and a curb weight of 985kg.
1
2
Share

How to Start a Rolls-Royce?

Rolls-Royce starting procedure is as follows: 1. Press the start button for vehicle self-check; 2. Depress the brake pedal and press the one-touch start button to ignite; 3. Engage the foot brake, shift to D gear, then release the handbrake. Rolls-Royce models include: Phantom, Cullinan, Ghost, Wraith, and Dawn. Taking the 2019 Rolls-Royce Phantom as an example, it is a full-size luxury sedan with dimensions: length 5770mm, width 2018mm, height 1648mm, wheelbase 3552mm, and curb weight 2700kg.
4
5
Share

What is the suitable engine oil model for Hyundai Verna?

The suitable engine oil model for Hyundai Verna is 5w30. Engine oil plays roles in lubricating and reducing friction, assisting in cooling, sealing and preventing leaks, preventing rust and corrosion, and damping vibrations. Taking the 2020 Hyundai Verna as an example, it belongs to the compact car category with body dimensions of 4300mm in length, 1705mm in width, and 1460mm in height, a wheelbase of 2570mm, a fuel tank capacity of 43 liters, and a curb weight of 990kg. The 2020 Hyundai Verna features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 95PS, a maximum power of 70kW, and a maximum torque of 132.4Nm, paired with a 5-speed manual transmission.
5
1
Share

What does MT mean for vehicles?

MT in vehicles stands for manual transmission. The principle of a manual transmission vehicle is that the power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. The steps to start a manual transmission car are: 1. Sit in the car and start the engine; 2. Press the clutch and shift into first gear; 3. Slowly release the clutch while gently pressing the accelerator; 4. Fully release the clutch, and the car starts moving. Precautions for starting a manual transmission car: 1. Do not release the clutch too quickly; lift it slowly; 2. Press the accelerator only after the engine and drive shaft are connected; 3. Gently press the accelerator during the semi-engagement phase, then release the clutch; 4. Release the handbrake before starting.
12
4
Share

How to Disassemble a Beam Wiper Blade?

The method to disassemble a beam wiper blade is: 1. Take out the new beam wiper blade and prepare for replacement; 2. Press firmly on the middle connector clip position of the beam wiper blade with your hand; 3. While holding the clip position, lift the upper cover of the middle connector with your hand and check if the wiper blade is intact; 4. Lift the front wiper blade and inspect the old wiper blade; 5. Press firmly on the middle clip with your hand; 6. While holding the clip, lift the upper cover of the wiper blade with your hand to remove the old wiper blade; 7. Use the U-shaped hook to secure the new wiper blade in place. The function of the wiper blade is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.