Where is the USB port located in the Camry?

3 Answers
StMichael
07/29/25 9:56am
The USB port in the Camry is located below the center console, next to the cup holder. There is a cover that can be opened to reveal the USB interface. Generally, devices other than computers only support USB drives formatted in FAT32, and the USB drive must be a single partition with no hidden partitions present. The Camry is a mid-size sedan under GAC Toyota, with dimensions of 4885 mm in length, 1840 mm in width, and 1455 mm in height, and a wheelbase of 2825 mm. In terms of appearance, the Camry elevates the essence of modern aesthetics to a higher level under the development concept of being dynamic yet dignified. With a three-dimensional design philosophy, the use of concave and convex surfaces is more reasonable, especially the double concave design at the front and rear, which combines dignified nobility with an aggressive impact, making the Camry look perfect from any angle.
Was this review help?
18
3
Share
Laurie
08/13/25 12:09pm
I drive a 2021 Camry, and the USB port location is quite convenient—it's deep inside the center console on the driver's side. Just open the large lid, and you'll see it. Plug in a USB drive directly to play music or charge. It's easy to find without bending over too much, and you can operate it effortlessly while driving. The location may vary in different model years of the Camry. For example, older models before 2018 might have it in a small drawer under the dashboard or in a storage compartment near the gear shift. You can ask the salesperson when purchasing the car. It's best to use a USB drive formatted in FAT32 to avoid file reading issues. The design is quite user-friendly—I often use it to play music while driving, and it also helps with charging during navigation. It works very smoothly.
Was this review help?
20
3
Share
Expand All
MacAlivia
10/06/25 8:42am
As someone who frequently repairs cars, the location of the Camry's USB port depends on the specific model year. For post-2020 models, most are inside the center armrest—lift the compartment lid and look toward the front, where there’s a clear USB label. For 2015–2019 models, they’re often found under the dashboard or in the glovebox corner; some even have hidden ports near the steering wheel. When troubleshooting wiring issues, I often locate it—a well-placed port saves repair time. Ensure a secure connection when plugging in a USB drive for data transfer or charging to avoid disruptions. Owners should check the manual first, as layouts may differ between trims like Luxury and standard editions.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.