Where is the USB port in the Volkswagen Lamando?

2 Answers
Cox
07/30/25 2:34am
The location of the USB port in the Volkswagen Lamando varies by trim level. For the Fashion and Comfort trims, it is located below the center console screen, while for the Luxury and GTS trims, it is inside the front armrest box. Here are the details: 1. In-car USB port: This is designed for audio data transmission, primarily for connecting USB drives to play music. Most vehicle USB ports provide a current of 5V/0.5A. In comparison, the standard charging current for smartphones is 5V/1A, and for tablets, it is 5V/2A. 2. Load resistance: A car designed for a top speed of 200 KM/h can safely operate at 100 KM/h without issues. Similarly, a car designed for 50 KM/h follows Ohm's Law (I=U/R), where the current is determined by voltage and load resistance. In this context, the smartphone acts as the load resistance.
Was this review help?
8
5
Share
Ortega
08/16/25 8:45am
As a frequent driver of Volkswagen models, I must say the most common location for the Lamando's USB port is in that small storage compartment below the center console – just glance down and you'll spot it right next to the gear shift. Some higher-trim versions may have a second port tucked along the inner wall of the armrest box, with newer models particularly favoring this discreet design. I remember spending ages searching when first driving a friend's Lamando, only to realize it's perfectly visible when leaning forward from the driver's seat. Pro tip: use a short cable to avoid tangling with the handbrake during charging, and regularly clean dust buildup around the port. For older models, check near the cigarette lighter; if all else fails, start the engine and test cable connections to locate the illuminated port.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Are 10mm Wrenches Always Used for Removing Car Batteries?

Original vehicle battery terminal bolts typically require a 10mm wrench. Expanded information about car batteries is as follows: 1. Definition: The normal service life ranges from 1 to 8 years, largely depending on the vehicle's condition. With proper alternator charging and no electrical leakage to ground, the battery can generally last over 3 years. 2. Working Principle: It uses lead plates filled with sponge lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy converts to chemical energy, while discharging converts chemical energy back to electrical energy. When discharging, metallic lead serves as the negative electrode, undergoing oxidation to form lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction to also form lead sulfate.
16
3
Share

Does prolonged parking with the car turned off in N gear harm the vehicle?

Prolonged parking with the car turned off in N gear does not harm the vehicle. However, parking in N gear carries the risk of the car rolling away, whereas in P gear, the internal locking mechanism can prevent the car from rolling even if the handbrake is forgotten or the brake pedal is not pressed. Below is relevant information: 1. The function of N gear: The N gear in an automatic transmission car is the same as the neutral gear in a manual transmission car. When shifted into N gear, the engine and transmission are separated. When towing, the gear can be placed in N gear, but automatic transmission cars are not allowed to be towed for extended periods. 2. Why it doesn't harm the vehicle: In N gear, the transmission gears are disengaged, allowing the input and output shafts to rotate freely. This is the safest state for the transmission, even safer than P gear, as P gear locks the transmission output shaft.
14
5
Share

What are the routine inspection items for diesel fuel?

Routine inspection items for automotive gasoline and diesel fuel include: density, distillation range, copper strip corrosion, mercaptan sulfur, vapor pressure, oxidation stability, benzene content, oxygen content, sulfur content, water and mechanical impurities, actual gum, carbon residue, octane number, cetane number, etc. There are also special items such as diesel lubricity, polycyclic aromatic hydrocarbons detection, and quinizarin content detection in "red oil". Additional information: 1. Petroleum product testing scope: Includes analysis and testing of automotive gasoline, automotive diesel, naphtha, solvent oil, methanol gasoline, biodiesel, aviation kerosene, fuel oil, lubricating oil, grease, paraffin, asphalt, petroleum coke products, and crude oil evaluation. 2. Petrochemical product testing scope includes: petroleum benzene, petroleum toluene, para (ortho, meta) xylene, mixed aromatics, methyl tert-butyl ether, methanol, ethanol, isopropanol, butanol, ethylene glycol, diethylene glycol, acetone, butanone, ethyl acetate, isopropyl acetate, methyl acetate, vinyl acetate, acrylic acid, acrylate, acetonitrile, acrylonitrile, etc. Routine inspection items include: purity analysis, impurity analysis, distillation range, density, acidity, color, and metal element analysis.
3
2
Share

What is the tire model and size for a 4x2 truck?

4x2 trucks typically use tires with the model and size 12.00R22.5. Below is relevant information about automotive tire models and sizes: 1. Tire model: The tire model represents the ratio between the tire sidewall height and the tire section width. For example, in a 215/60/R17 tire, the first three digits indicate the tire section width; the middle two digits represent the aspect ratio; the letter denotes the radial structure of the tire, and the last two digits indicate the rim diameter. 2. Tire classification: Tires are categorized by usage, including load-bearing tires, passenger vehicle tires, and mining tires, among others. Load-bearing tires must indicate the ply rating in addition to the size specifications marked on the sidewall. The ply rating of load-bearing tires does not refer to the actual number of layers but rather to the load-bearing performance of tires made with high-strength material cords, which is equivalent to the number of cotton cord layers in tires made with cotton cords.
14
5
Share

What is a Crankshaft Pulley?

The crankshaft pulley is one of the critical components of an engine. It bears the force transmitted from the connecting rod and converts it into torque, which is then output through the crankshaft to drive other engine accessories. Below is a detailed introduction to the automotive crankshaft pulley: 1. Working Principle of the Crankshaft Pulley: The crankshaft is subjected to centrifugal forces from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, causing it to endure bending and torsional loads. 2. Quality Requirements for Automotive Crankshaft Pulleys: Crankshaft pulleys used in automotive engines must possess sufficient strength and stiffness. The journal surfaces need to be wear-resistant, operate uniformly, and maintain good balance to adapt to the complex working principles and environments of automotive engines.
13
0
Share

What does the three-electric warranty mean?

Three-electric warranty refers to the warranty regulations and policies covering the motor, battery, and electronic control system of electric vehicles. The following is a detailed introduction about electric vehicles: 1. Overview: Electric vehicles (BEV) refer to vehicles that use on-board power as the power source, drive the wheels with motors, and meet all the requirements of road traffic and safety regulations. Due to their relatively smaller impact on the environment compared to traditional vehicles, their prospects are widely optimistic. 2. Classification: Electric vehicles can be divided into three categories: battery electric vehicles (BEV), hybrid electric vehicles (HEV), and fuel cell electric vehicles (FCEV). The technology of pure electric vehicles is relatively simple and mature, and they can be charged wherever there is a power supply.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.