Where is the USB port in the new Bora?

2 Answers
Yolanda
09/01/25 7:49am
The USB port in the new Bora is located in the center console. The USB port inside the new Bora is designed for audio data transmission, so the port current is only 5V/0.5A. More details are as follows: 1. The USB port in the Volkswagen new Bora is intended for audio data transmission. The car's USB ports can have currents of either 5V/2.1A or 5V/0.5A. Many mobile phones require an input current of 5V/1A. A 5V/2.1A car USB port can certainly meet this requirement, providing 1A current to mobile phones and 2A current to tablets. 2. If the port is 5V/0.5A, it is clear that the current will not meet the standard. In this case, charging a mobile phone will not only take a long time but also cause the phone to overheat.
Was this review help?
4
5
Share
DelAlexander
09/14/25 3:32am
The USB port location of the new Bora is actually quite easy to find. In my experience, it's usually hidden inside the center armrest box of the driver's seat. You can see it as soon as you lift the armrest lid. There's typically a dedicated port there for charging your phone or other devices, which comes in handy when your navigation phone runs out of battery while driving. If you're not familiar with it, don't worry - you can take your time to explore when parked, or refer to the diagrams in the owner's manual or watch video demonstrations online. Some models may have it designed near the cigarette lighter on the center console, but for most Volkswagen Bora models, it's in the armrest box, which also prevents messy cables from interfering with driving. Remember to regularly check and clean the port from dust to ensure good contact and extend its lifespan.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

How to Turn on the High Beam Lights for the Nissan Qashqai?

Nissan Qashqai high beam lights can be turned on as follows: 1. It is generally not recommended to use high beams when driving in the city because urban areas usually have good lighting conditions. The high angle of the high beams can easily dazzle oncoming drivers and pedestrians, affecting their visibility and posing safety risks. It is also considered impolite driving behavior. 2. However, flashing the high beams at night can serve as an alternative to honking to alert pedestrians and other vehicles without creating excessive noise. 3. High beams can be used on highways or in rural areas without streetlights to improve visibility. When encountering oncoming traffic, it is advisable to switch to low beams for safety and courtesy. 4. Using high beams at low speeds may affect the battery's lifespan since the engine's power generation is insufficient, leading to a negative charging state. Additionally, using high beams at low speeds at night increases fuel consumption, which is not cost-effective, especially with high fuel prices.
18
4
Share

How to Control Vehicle Speed Using the Clutch?

There are four main methods to control vehicle speed using the clutch. Below is a detailed introduction to clutch-based speed control: 1. Listen to the Engine: After starting the vehicle, the engine idles at a high-pitched sound. When the clutch reaches the engagement point, the engine RPM noticeably drops, and the sound becomes deeper. 2. Feel the Pedal: At the engagement point, the transmission system requires "full engagement" due to friction, causing a slight upward push sensation on the clutch pedal. 3. Sense the Vehicle Body: When the engagement point is reached, partial connection of the transmission system provides some starting power, causing the vehicle body and gear lever to vibrate slightly. 4. Monitor RPM: Engine RPM shows significant changes during clutch operation, so observing the tachometer can help coordinate clutch usage for speed control.
15
5
Share

What to Do in Case of a Vehicle Accident?

In the event of a vehicle accident, you should stop immediately and handle the situation based on whether there are any casualties. The details are as follows: 1. If there are casualties: The driver should immediately provide first aid to the injured and quickly report to the traffic police on duty or the traffic management department of the public security authority. If the scene is altered due to rescuing the injured, the original positions should be marked. Passengers, drivers of passing vehicles, and pedestrians should assist as needed. 2. If there are no casualties: If the parties involved have no disputes over the facts and causes, they can leave the scene immediately, restore traffic, and negotiate compensation for damages on their own. If they do not leave the scene immediately, they should quickly report to the traffic police on duty or the traffic management department of the public security authority.
10
4
Share

Should You Pay First or Inspect the Car First When Buying a New Car?

When purchasing a car, it is generally required to pay a deposit first. Upon taking delivery of the vehicle, you should first inspect and test-drive the car to ensure there are no issues before paying the remaining balance. The process of taking delivery involves inspecting the car first; do not rush to make the payment before thoroughly checking the new car. Once payment is made, it signifies that all procedures are essentially completed, and if any issues are discovered during the inspection, it may be difficult to request a refund or exchange. Below is an introduction to the inspection process: 1. Vehicle documentation: The purchase invoice, certificate of conformity, vehicle type approval certificate, vehicle registration certificate, warranty certificate, owner's manual, and new vehicle delivery checklist should all be handed over to the owner upon delivery. If the dealership is responsible for license plate registration and insurance, you should also obtain the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory insurance label from the salesperson. 2. Vehicle inspection: Exterior: Check if the car's paint is intact, verify the production date on the vehicle identification plate, check the production date of the window glass, look for severe tire wear, ensure the engine compartment is clean, and confirm the trunk is tidy and clean. Interior: Check if the doors open and close smoothly, inspect for any damage or severe stains on the interior, test the vehicle lights, air conditioning, windshield wipers, windows, dashboard, audio system, and other functions to ensure they are operating normally.
18
4
Share

What is the solution when the warn warning light is on?

warn warning light on the solution is: 1. You can use a diesel vehicle computer diagnostic tool to monitor the engine system and clear the fault code. If the light goes off, there is no problem; 2. If the light remains on, read the fault code and repair the vehicle based on the information obtained. Here is some related information about other warning lights on the vehicle: 1. When driving, owners should learn to distinguish the colors of warning lights. If a red warning light comes on, it indicates a danger signal, and the vehicle should be pulled over immediately; 2. A yellow indicator light represents a warning, indicating that a certain part of the vehicle's light is damaged or there is an issue with the engine exhaust system; 3. A green indicator light represents a functional indicator of the vehicle, allowing for safe driving.
4
4
Share

What does 'Check Exhaust System' mean?

Check Exhaust System refers to a malfunction in the emission system, which may trigger an alarm signal due to a dirty three-way catalytic converter or oxygen sensor; it could also be caused by poor gas combustion leading to system alerts. Alarm signal caused by dirty three-way catalytic converter and oxygen sensor: A car's exhaust pipe consists of three sections: the front pipe (header), mid-pipe, and tailpipe. The three-way catalytic converter is located in the front pipe, which is also known as the exhaust manifold. In most cars, the exhaust manifold can be seen by opening the engine hood. The three-way catalytic converter may fail after prolonged use, and if it fails, it could cause the engine warning light to illuminate. The role of the oxygen sensor in the exhaust system: Most cars have two oxygen sensors—one located behind the exhaust manifold and another behind the three-way catalytic converter. The oxygen sensor detects the oxygen content in the exhaust gases and relays this signal back to the ECU.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.