Where is the USB port in the GLC260?

1 Answers
McWalter
07/30/25 3:58am
The GLC260 has three USB ports, with two located inside the center armrest and one at the rear air conditioning vent. These USB ports allow you to connect a USB drive to the vehicle, enabling the car's multimedia entertainment system to play songs from the drive. Additionally, you can connect external devices like smartphones for phone mirroring and connectivity purposes, and they can also power devices such as dash cams. The location of USB ports may vary depending on the vehicle model, but they are typically found on the central dashboard, inside the center armrest, or near the rear air vents. Owners are advised to consult the vehicle's user manual to locate the USB ports before use.
Was this review help?
10
0
Share
More Forum Discussions

What are the tire specifications for the Toyota Yaris L?

The tire specifications for the Toyota Yaris L are divided into 175/65R14 and 185/60R15. The first numbers 175 and 185 represent the tire width in millimeters (175mm and 185mm). The numbers 60 and 65 indicate the aspect ratio of the tire's cross-section (60% and 65%), meaning the height of the cross-section is 60% or 65% of the width. The numbers 14 and 15 represent the rim diameter in inches (14 inches and 15 inches). The letter "R" in the middle stands for radial tire. The Toyota Yaris L uses Bridgestone (ECOPIA) tires, equipped with aluminum alloy rims, and the spare tire is a non-full-size specification. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack. Place the jack under the vehicle frame near the tire you intend to replace, ensuring the jack contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also have the following common markings: Tire cord material: Indicated by Chinese Pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
19
0
Share

How to Clean Asphalt Splashed on a Car?

Cleaning asphalt splashed on a car depends on the situation. Here are specific cleaning methods: 1. For minor cases: If the asphalt splashed on the car is not severe, you can use high-pressure water to rinse it directly. For stubborn areas, repeated cleaning may be necessary. 2. For severe cases: If the asphalt is severe, it is recommended to purchase a specialized 'tar cleaner' from an auto parts store and apply it appropriately during car washing. However, ensure thorough rinsing after using the cleaner, as its odor and chemical properties may potentially cause some damage to the vehicle.
6
3
Share

Why Does a Motorcycle Stall When Throttling on a Cold Start?

Motorcycle stalling when throttling on a cold start may be due to the engine idle speed being too low or a malfunction in the carburetor. Below is an introduction to motorcycles: 1. Definition: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars, known for its lightweight, agility, and speed. It is widely used for patrolling, passenger and cargo transport, and as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. 2. Engine Characteristics: (1) The engine is either a two-stroke or four-stroke gasoline engine. (2) It uses air cooling, which can be natural or forced air cooling. (3) The engine operates at high speeds. (4) The engine's crankcase is integrated with the clutch and transmission, making the structure compact.
17
5
Share

What are the differences between the D-MAX and Lingtuo pickups?

The differences between the Lingtuo and D-MAX are as follows: 1. Different displacement: The Lingtuo engine has a displacement of 2.5T; the D-MAX engine has a displacement of 2.5L. 2. Different air conditioning: The Lingtuo and D-MAX are equipped with different air conditioning systems. The Lingtuo has electric air conditioning, while the D-MAX has manual air conditioning. The similarities between the Lingtuo and D-MAX are as follows: 1. Same dimensions: Both the Lingtuo and D-MAX have a body length, width, and height of 5295mm, 1860mm, and 1775mm respectively, with a wheelbase of 3095mm and a maximum payload capacity of 485kg. 2. Same drive system: Both vehicles feature a front-engine, rear-wheel-drive layout, with a double-wishbone independent front suspension and a leaf spring non-independent rear suspension.
7
5
Share

Is There a Difference Between Hydraulic Brakes and Disc Brakes?

Hydraulic brakes and disc brakes are different. Below are the relevant introductions to hydraulic brakes and disc brakes: 1. Brake lever structure: The lever of a cable disc brake operates by pulling a cable, and you can see the cable inside. In contrast, the lever of a hydraulic disc brake operates by compression and is enclosed. 2. Transmission method: Hydraulic brakes use the pressure of liquid oil to drive the hydraulic transmission device—the piston. The piston is pushed by pressure, thereby squeezing the connected brake pads to clamp the brake disc, achieving the braking effect. This is known as hydraulic disc braking, which uses hydraulic transmission for braking. 3. Replacement method: Hydraulic brakes require oil changes, but they won't function without oil. Disc brakes require brake pad replacements.
13
5
Share

What to Do If You Lose the Card on the Highway?

Here are the steps to take if you lose the card on the highway: 1. Register Information and Pay for the Card: Before exiting the highway, the toll station will ask the driver to register personal and vehicle information, and then issue a replacement highway toll card, with a fee of approximately 50 yuan (fees may vary by region). 2. Toll Settlement: For the toll fee, the station will determine the starting point of the driver's journey using surveillance footage, the vehicle's license plate number, etc., and charge the corresponding toll based on the actual entry point. 3. Unidentifiable Entry Point: If the toll station cannot identify the actual entry point, the toll will be calculated based on the farthest possible entry point within the connected toll network.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.