Where is the USB port in the Envision?

2 Answers
McSawyer
07/28/25 10:03pm
The USB port in the Envision is located inside the center armrest. The functions of the USB port include: 1. Charging mobile devices; 2. Connecting external storage devices to play music; 3. If the navigation system supports connectivity, it can also synchronize with communication devices. Taking the 2021 Envision as an example, it is a midsize SUV with the following dimensions: length 4694mm, width 1839mm, height 1686mm, and a wheelbase of 2750mm. The fuel tank capacity is 66 liters. The 2021 Buick Envision features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
17
2
Share
OPaige
08/12/25 2:37am
I've been using the Envision for several months now, and at first, I was a bit confused about finding the USB port. Later, I discovered it's conveniently located inside the center armrest. When you lift the armrest lid, there's a USB-A port on the inner side towards the front, sometimes accompanied by a 12V power outlet. During a road trip with a friend, he was in a hurry to charge his phone as soon as he got in the car. I demonstrated plugging in the phone, and it immediately started navigation and playing music—the process was super simple. The armrest design is quite thoughtful; closing the lid doesn't pinch the cables, avoiding any distraction while driving to fumble around. If it's a newer Envision model, there might be an additional one under the center console, but the one in the armrest is the most commonly used. Once you remember its location, plugging in your devices before starting the journey makes the trip smoother and worry-free.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What is the reason why the rear light of Corolla is always on and cannot be turned off?

First, check whether the switch has been triggered, and then consider the issue of the car light circuit failure. Here is some additional information: 1. Three modes of car lights: ON is the always-on mode. When this switch is turned on, the ceiling light will stay on and will not turn off even after the car is locked. DOOR mode means the light will only turn on when the door is opened. OFF is the off mode. Selecting this mode will keep the ceiling light off and it will not light up. 2. Other reasons: If the always-on mode is accidentally activated, the rear seat light will stay on after the vehicle is turned off. If the rear seat light remains on even after the switch is turned off, it could also be due to the vehicle door not being closed properly when getting out of the car, which can cause the interior light to stay on.
17
2
Share

Should I Replace One or Both Front License Plates If One Is Lost?

If the front license plate is lost, you should replace both. Below are the functions of license plates: 1. Identifying the vehicle's region: The primary function is to determine the vehicle's region of registration. 2. Facilitating inquiries: The license plate can also be used to look up the vehicle's owner and registration details. In most countries, any vehicle driven on public roads must display license plates, with strict regulations on size, font, and color. Additionally, in some countries, motorcycles and exempted vehicles may only need to display one license plate.
12
5
Share

Will a novice be penalized for stalling at a traffic light and not moving?

Failure to proceed when the light turns green will result in penalties and fines. According to regulations: a red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Driving against traffic signal instructions will incur a fine and a deduction of 3 points. When encountering traffic congestion at an intersection ahead, motor vehicles must wait in line outside the intersection and must not enter it. Below are common traffic violations: 1. Running a red light: This is the most common violation. Since the new traffic regulations were implemented, running a red light results in an immediate deduction of 6 points. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will face a fine and 15 days of detention. Driving without a license or with a revoked license will result in 15 days of detention and a fine. 3. Overloading or overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. Exceeding these thresholds will result in higher fines. 4. Drunk driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence will also result in a 3-month suspension and a fine. 5. Speeding: Exceeding the speed limit by more than 50% will result in a fine and revocation of the driver's license.
3
4
Share

Must the driver's license photo have a white background?

The background color of the driver's license photo should be white. Specific requirements: the background color must be white, no red clothing (affects stamping), women should not wear earrings, no photos with draped hair during shooting, men's hair should not be too long, the headshot must be clear with a natural expression. The photo size should be 32mm×22mm, with a head width of 14mm-16mm and a head length of 19mm-22mm. Documents required for applying for a driver's license: 1. The "Motor Vehicle Driver's License Application Form" filled out as per regulations; 2. Medical institutions at or above the county level designated by the provincial health bureau or military; 3. Original and photocopy of the applicant's identity proof; 4. Original and photocopy of the applicant's foreign driver's license (if applicable); 5. Six photos of the driver.
9
2
Share

What is the Dynamic Power Distribution System?

The Dynamic Power Distribution System is a set of dynamic power distribution systems developed by BMW. BMW's Dynamic Power Distribution System can accurately distribute driving force between the two rear wheels according to the needs of the rear axle, adjust the vehicle's posture to improve stability, thereby providing higher safety. Here are the relevant details: 1. When the vehicle turns right: The left rear wheel will transmit more power to the road, so the Dynamic Power Distribution System will allocate more driving force to the left rear wheel. 2. When the vehicle turns left: The Dynamic Power Distribution System will deliver more driving force to the right rear wheel, so in this case, the right rear wheel will transmit more power to the road. 3. When the vehicle is driving straight: The Dynamic Power Distribution System will deliver the same amount of power to both rear wheels, thereby achieving optimal traction.
1
5
Share

What are the effects of filling a car designed for 95-octane gasoline with 92-octane fuel?

Filling a car designed for 95-octane gasoline with 92-octane fuel does have effects. If you occasionally use the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can lead to the following impacts: For vehicles designed for lower octane fuel, accidentally using higher octane gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles designed for higher octane fuel, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane number, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. Mild knocking only increases noise without obvious engine damage, but noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in severe cases. Besides checking the recommended gasoline grade in the vehicle's manual, you can also find it on the fuel filler cap. Generally, the gasoline grade can also be determined by the engine's compression ratio: vehicles with compression ratios between 8.6-9.9 should use 92-octane gasoline, while those between 10.0-11.5 should use 95-octane. However, with modern technologies, compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play roles. Generally, higher octane gasoline has higher octane numbers and better anti-knock properties. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.