···
Log in / Register

Where is the USB port in the 2021 Audi A6?

4 Answers
DelNora
07/28/25 11:37pm
The USB socket in the Audi A6 is located at the lower part of the central multifunction display. Below is some relevant information about the Audi A6: 1. Introduction: The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon versions. The Audi A6 incorporates Audi's high-tech exclusive technologies, further enriches its luxurious configurations, and endows it with outstanding sports characteristics. From design to performance, it embodies perfect quality. Its features include being more luxurious, dynamic, and mature. 2. Rear: The upper part of the rear has been changed from a smooth streamline shape to slightly raised edges, which function as a spoiler. This design provides sufficient downforce when the car is driven at high speeds, thereby enhancing the vehicle's handling and safety under high-speed conditions. It also gives the rear a more rugged and sporty appearance.
Was this review help?
5
1
Share
DiLeila
08/12/25 2:54am
I've been driving a 2021 Audi A6 for two years, and the USB port is conveniently located inside the center armrest. Just open the large armrest with the Audi logo between the front seats, and you'll see a USB port with a dust cover when you look down. There's also space next to it for the cable to pass through. For higher trim models, there are two additional ports for passengers under the rear air conditioning control panel. It's best not to use overly large USB drives—32GB or smaller is most reliable. When playing music, remember to select the USB input source in the MMI system. If you can't find it, there might be a spare port hidden in the corner of the storage compartment under the center console, but the one in the armrest is the most convenient.
Was this review help?
18
5
Share
Expand All
McSpencer
10/01/25 6:02am
The USB port for the 21 Audi A6 is mainly located inside the center armrest. Lift the cover and you'll find a Type-A port with a rubber cap at the front left – just plug in to play music. Some configurations may have an additional port in the glove compartment, but you'll need to check the manual to confirm. When using it, remember to format to FAT32, as NTFS may not be recognized. Personally, I've had no issues playing FLAC lossless music from a car-mounted hard drive, and the port provides enough power to run a 2.5-inch external HDD. For versions equipped with four-zone air conditioning, there are two additional USB-C ports below the rear air vents, but these are for charging only and cannot read USB drive data.
Was this review help?
19
1
Share
Expand All
EmmaDella
11/14/25 7:49am
As an A6L owner, let me tell you: the USB port is located in the groove on the driver's side when you lift the armrest console, covered by a dust plug. After inserting the USB drive, the media option automatically pops up on the central control screen, supporting MP3/WAV/FLAC formats. Tests show that a 256GB solid-state USB drive reads smoothly, but mechanical hard drives may experience lag. The port behind the rear center armrest is only for power supply, and the 12V power outlet in the storage compartment cannot transfer data either. Remember to eject the device before turning off the engine, as directly pulling it out may cause file corruption.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Where to Collect the Inspection Exemption Label for Vehicles?

Vehicle inspection exemption labels can be obtained at the local vehicle management office or through the Traffic Management 12123 App without any fees. Below is some information about the inspection exemption label for vehicles: 1. Vehicle Management Office: If applying at the vehicle management office, the vehicle owner needs to bring the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy of the vehicle, and other relevant documents. Before processing, all traffic violation fines must be settled. 2. 12123 App: On the homepage of the Traffic Management App, find the 'Apply for Inspection Exemption Label' option, click on it, and then select the vehicle status option. Click 'Query,' and a prompt box for handling the annual inspection service will appear. Read the prompt information carefully, confirm, and click 'Continue Processing.' Fill in the vehicle information as required, review the prompt information, confirm, and click 'Next' to complete the application for the inspection exemption label.
17
3
Share

How to install the alternator belt on a Mercedes-Benz GLA?

Installation method for the alternator belt on a Mercedes-Benz GLA: 1. Loosen the generator fixing screw and the belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt on and align it properly; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Mercedes-Benz GLA is a compact SUV introduced by Beijing Benz, with dimensions of 4427mm in length, 1834mm in width, and 1610mm in height, and a wheelbase of 2729mm. It is equipped with a 1.3T turbocharged engine, delivering a maximum power of 100kw, and matched with a 7-speed dual-clutch or 8-speed dual-clutch transmission.
11
0
Share

Can a C1 License Drive Yellow License Plate Vehicles?

C1 license cannot drive yellow license plate vehicles, it only permits driving blue license plate vehicles. Yellow license plate vehicles typically refer to heavy-duty or large vehicles, which require a B-class license or above to operate. The C1 license is designated for small and micro passenger vehicles, as well as light, micro, and small special-purpose vehicles. The full name of a driver's license is the motor vehicle driving license, which is a legal document issued by the administrative authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
14
0
Share

How much engine oil should be added to a Mondeo?

Mondeo requires 4.5 liters of engine oil. If it's a major overhaul without activation, approximately 5 liters are needed. The specific steps for adding engine oil are as follows: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Open the hood; 4. Unscrew the engine oil cap and add the engine oil; 5. The oil level should be between the upper and lower marks on the dipstick. The Mondeo is a mid-size car introduced by Changan Ford, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with either a 1.5T or 2.0T turbocharged engine, with maximum power outputs of 134kw and 152kw respectively, paired with a 6-speed automatic transmission.
14
2
Share

How to Obtain the Vehicle Environmental Protection Label?

Vehicle environmental protection labels can be obtained at the vehicle management office. Owners need to bring their vehicle license, motor vehicle registration certificate, and their own ID card. The steps are as follows: 1. Submit the required documents at the issuance window of the vehicle management office; 2. The vehicle management office will review the documents; 3. Upon successful review, the vehicle management office will issue and print the classification label; 4. The applicant fills out the registration form; 5. The applicant receives the label and retrieves their valid documents. The vehicle environmental protection label is a classification label for motor vehicle emission standards issued by the state, categorized into yellow and green labels. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
15
2
Share

What to do if a car window can only go down but not up?

Solutions for a car window that can only go down but not up include: 1. Initialize the window, which is usually caused by a malfunction in the window control system; 2. Remove dirt from the window lift channel by inserting a chopstick wrapped in a wet towel into the guide channel and moving it up and down to clean; 3. Apply lubricant or replace the window seal. Most cases where the car window cannot move up or down are due to mechanical jamming, and applying some lubricant after cleaning the guide rails should resolve the issue. Car window regulators can be structurally categorized into arm-type regulators and flexible-type regulators. Arm-type regulators include single-arm regulators and double-arm regulators, while flexible-type regulators include cable-type regulators, belt-type regulators, and flexible-shaft-type regulators.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.