Where is the USB port in the 2020 Magotan?

1 Answers
DelRonan
07/29/25 10:44pm
The location of the USB port in the 2020 Magotan: It is inside the glove compartment on the passenger side. There is a pull-down strap inside; when you pull it down, you can see the USB port inside. Taking the Magotan 2020 280TSI DSG Comfort model as an example, its dimensions are 4865mm in length, 1832mm in width, and 1471mm in height, making it a 4-door, 5-seater sedan. The car is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power output of 110kW and a maximum torque of 250Nm. The top speed is 208km/h, featuring front-wheel drive and a unibody structure.
Was this review help?
16
0
Share
More Forum Discussions

Will External Tire Pressure Monitoring Cause Air Leaks?

External tire pressure monitoring may cause air leaks if the valve stem has chips or wear. Replacing the valve stem can resolve this issue. The principle of the external sensor involves using a pushpin to open the valve core, allowing the sensor to measure the internal tire pressure. The sensor cleverly utilizes the threads of the dust cap for secure attachment to the valve stem. With an external sensor, it must be removed each time the tire is inflated and reinstalled afterward. After reinstallation, apply soapy water to the joint between the sensor and the valve stem to check for air leaks. If the sensor protrudes from the tire after installation, avoid passing over obstacles to prevent scraping and potential air leaks. The external sensor is made of metal and high-strength plastic through die-casting, ensuring a strong and precise fit.
11
3
Share

Where is the coolant located in a Mercedes-Benz?

The coolant in a Mercedes-Benz is located behind the left headlight in the engine compartment. After starting the engine, let it idle for 2 to 3 minutes. If the coolant level drops, top it up until it reaches the Max mark. Coolant, also known as antifreeze coolant, primarily functions to prevent freezing, cooling, corrosion, and scaling. The color of the coolant is designed to distinguish it from other liquids, making leaks easier to detect. Taking the Mercedes-Benz C-Class as an example, this car is a mid-sized sedan under the Mercedes-Benz brand. In terms of power, the vehicle is equipped with three types of engines: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.
3
0
Share

What is the normal charging current for a car battery?

The charging current of a car battery is related to its capacity, usually one-tenth of the battery capacity. For example, a battery with a specification of 12V20aH has a normal charging current of 1.5A to 2.5A. Currently, chargers on the market can automatically adjust the output current based on the battery's condition, thereby reducing damage to the battery. Normally, it takes 4 to 5 hours to fully charge the battery. A battery is a type of cell, also known as a storage battery. Its working principle is to convert chemical energy into electrical energy. The commonly referred-to battery is a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte.
20
1
Share

How to Check if There is a GPS in the Car?

Methods to check if there is a GPS in the car: Use a GPS signal detector for detection. Since the tracker, like a mobile phone, requires a SIM card to receive and send information, it operates at a certain frequency when active. At this time, you can use the GPS detector to scan around the car, and the GPS location can be quickly identified. Alternatively, you can visually inspect common hiding spots such as the front and rear bumpers, inside the trunk, the glove compartment, under the passenger seat, the side compartment, the door compartments, or the car chassis. A GPS tracker utilizes GPS satellite positioning terminals to accurately locate remote targets, enable real-time tracking, remote monitoring, and provide anti-theft and anti-hijacking features.
18
1
Share

How many years of holding an A3 driver's license are required to upgrade to an A2 license?

More than three years. Below are the specific details: Introduction: The conditions for upgrading from A3 to A2 are that the driver must have held a medium-sized bus or large truck driving qualification for more than three years, or have held a large bus driving qualification for more than one year, and must not have accumulated 12 penalty points in any of the last three scoring cycles before applying. Notes: To apply for an A2 driving qualification upgrade, the driver must have held an A1 license for more than one year, must not have accumulated 12 penalty points in any of the last three scoring cycles before applying, or must have held a B2 or B1 license for more than three years. Additionally, the driver must be between 24 and 50 years old.
7
1
Share

What is the engine model of the Tayron 1.4?

The engine models for the Tayron 1.4 are EA211 and EA888. Introduction to engine models: Engine models are designated by manufacturers in accordance with relevant regulations or industry practices to indicate key information about the engine. This includes the manufacturer, specifications, performance, features, technology, intended use, and production batch of the engine. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer's name, model, and production number. How to check the engine number: The engine number can be found on the vehicle registration certificate, vehicle license, purchase invoice, factory certificate of compliance, operating license for commercial vehicles, vehicle purchase tax payment certificate, public security registration records, vehicle insurance card, or directly on the engine itself (typically on the engine nameplate).
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.