Where is the USB port for Lexus ES300 car USB drive?

1 Answers
MacJesse
07/30/25 6:16am
Lexus ES USB ports are located inside the center console and in front of the gear shift lever. Here are the relevant details: Interface function: The USB port in cars mainly serves to utilize the vehicle's standard power supply, using USB as an interface to charge electrical devices or as a fixed power interface for electrical equipment. Precautions: Charging should only occur when the car engine is running to avoid damage to electrical devices caused by unstable vehicle power supply. Do not connect too many electrical devices to prevent excessive load that could damage the car battery and alternator. Do not use during thunderstorms to avoid lightning strike accidents. Avoid using USB ports in humid environments. If there is rust or water stains, it may cause the USB drive to fail to connect properly.
Was this review help?
18
1
Share
More Forum Discussions

How to Maintain Straight Driving for Beginners?

Methods for beginners to maintain straight driving: Hold the steering wheel steadily and straight, find suitable reference points on the road to assist in keeping the vehicle straight for a long time, and look far ahead to make it easier to drive straight. Precautions for beginners driving are as follows: 1. Check the vehicle before hitting the road, including whether the tire pressure is sufficient, and the condition of the onboard tools. Although the chance of using onboard tools is small, if they are lost or damaged, they should be purchased in time. 2. Beginners should stabilize the speed at around 60, which is also beneficial for control. 3. Observe the rearview mirrors more often. Rearview mirrors can broaden the field of vision, but there are also blind spots. Beginners should accumulate more experience during driving.
2
3
Share

What is the cover in front of the car called?

The cover at the front of the car is called the engine hood, also known as the engine cover. More information about the engine hood is as follows: 1. The engine hood (also known as the engine cover) is one of the most noticeable body components and is frequently inspected by car buyers. The main requirements for the engine hood are heat insulation, sound insulation, lightweight, and high rigidity. 2. When opened, the engine hood usually flips backward, though a small portion may flip forward. 3. To prevent accidental opening due to vibration while driving, the front of the engine hood is equipped with a safety latch locking mechanism. The locking switch is located under the dashboard inside the cabin. When the car door is locked, the engine hood should also be locked simultaneously.
12
3
Share

What does the Hill Descent Control system mean?

Hill Descent Control, also known as the slope control system, is an automatic control system used for downhill driving. Here is more information about the Hill Descent Control system: 1. The principle of the HDC system is to combine engine braking with the ABS anti-lock braking system to maintain a state of "low speed without losing tire grip" when the vehicle is descending a steep slope. 2. The braking device automatically controls each wheel to move forward slightly faster than the walking speed, allowing the driver to focus entirely on steering. In short, it enables the vehicle to safely navigate steep slope conditions under controlled circumstances.
5
4
Share

What does the Buick Excelle Mild Hybrid mean?

Buick Excelle Mild Hybrid refers to the mild hybrid model equipped with a 48V mild hybrid system. Here are the relevant details: 1. The main component of the 48V mild hybrid system is a 48V motor. The Buick Excelle is equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.3-liter turbocharged engine. 2. The 1.3-liter turbocharged engine has a maximum power speed of 5500 rpm and a maximum torque speed range of 1800 to 4400 rpm; the 1.5-liter naturally aspirated engine has a maximum power speed of 6000 rpm and a maximum torque speed of 4400 rpm. The Buick Excelle uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear, which can improve the wheel's ground contact performance and grip.
4
2
Share

What is the range of the Jetour X70SEV?

Jetour X70SEV version has a range of 401 kilometers as given by the Ministry of Industry and Information Technology. However, the actual range may be lower in real-world usage because the Ministry tests the range under relatively ideal conditions. The range of pure electric vehicles is affected by many factors in actual use. Here are some relevant details: 1. The Jetour X70SEV is a pure electric vehicle, featuring a single motor configuration. The motor is front-mounted, making the vehicle front-wheel drive. The motor has a maximum power of 125 kW and a maximum torque of 300 Nm. 2. The Jetour X70SEV uses lithium iron phosphate batteries across all models, which is rare among pure electric vehicles. Most pure electric and plug-in hybrid vehicles use ternary lithium batteries, which have higher energy density and are lighter in weight. 3. The front suspension of the Jetour X70SEV uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension improves wheel contact with the ground, enhancing traction and, consequently, the vehicle's handling performance.
11
1
Share

Why Does the Wiper Make Noise?

Reasons for wiper noise are as follows: 1. Wiper aging: The wiper is made of rubber, and prolonged exposure to sunlight, wind, and rain can easily cause aging issues. Generally, the lifespan of a wiper is about one to two years. If the noise is due to aging, the wiper needs to be replaced. 2. Foreign objects between the wiper and the windshield: This issue is also quite common, mainly caused by small sand particles or other debris. Not only can it cause noise, but it may also scratch the windshield. In this case, simply removing the foreign objects will solve the problem. 3. Damage to the wiper linkage mechanism: This type of fault code issue arises when the motor, linkage mechanism, or other components malfunction, rust, or deform, all of which can lead to noise and other problems.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.