Where is the urea filter element located for replacement?

1 Answers
VanSienna
07/30/25 8:05am
The urea filter element is replaced inside the urea tank. Below is an introduction to the urea filter element: 1. Replacement frequency: The car urea filter element is estimated based on mileage, generally requiring replacement every 50,000 to 60,000 kilometers. It is necessary to replace the urea filter element regularly. The dirt-holding capacity of the urea filter element is limited, so even when using genuine urea solution, regular replacement is required. Once the filter element loses its filtering effect, impurities in the urea can cause system failures. 2. Recommendation: It is recommended to use genuine urea solution and replace the urea filter element regularly to ensure the proper functioning of the aftertreatment system, prevent engine torque limitation, and maintain normal vehicle operation.
Was this review help?
18
3
Share
More Forum Discussions

Why Can't the Sunroof of BMW 5 Series Open?

There are many reasons why the sunroof of a BMW 5 Series car cannot open, with the most common being the following four: 1. Sunroof circuit malfunction; 2. Damage to the sunroof drive motor; 3. Severe lack of lubrication in the sunroof track, causing the sunroof seal to stick to the car body; 4. Presence of foreign objects in the sunroof slot. Here is some related information about the BMW 5 Series: 1. Vehicle positioning: The BMW 5 Series is a mid-size luxury sedan under BMW, and it is a C-class sedan. 2. Power aspects: The domestically produced BMW 5 Series uses two engines: one is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. 3. Suspension type: The BMW 5 Series uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
7
4
Share

Can a Mainland Driver's License Be Used in Taiwan?

Mainland driver's licenses cannot be used in Taiwan. Here are the specific reasons: 1. Mutual Non-Recognition of Each Other's Driver's Licenses: Primarily because Mainland China is not a signatory to the Geneva Convention, and both sides do not recognize each other's driver's licenses. Therefore, a Mainland driver's license is not valid in Taiwan. Many so-called international driver's permits are merely translations of the Mainland China driver's license, and Taiwan does not recognize these translated versions either. 2. Taiwan's Regulations: According to current regulations in Taiwan, even if a Mainland driver's license is converted into a so-called international driver's permit, driving with it is considered unlicensed and subject to fines. In cases of drunk driving or accidents, not only will there be no insurance compensation, but the driver will also face legal liabilities. This could even affect the emergency contact's future entry to Taiwan. The only way to rent or drive a car in Taiwan is to first obtain a driver's license from a third region (such as Hong Kong, the United States, or many other countries and regions worldwide) and then obtain an international driver's permit issued by that third region (e.g., the United States).
18
0
Share

What are the methods to remove ice from car windows after they freeze?

Here are the solutions for dealing with frozen car windows in winter: 1. Turning on the heater: There are two types of air conditioning systems, manual and automatic: For manual air conditioning, first turn the temperature knob to the lowest position in the red zone and set the heater to the hottest setting. Then, rotate the air distribution mode button to the windshield defrost position. Next, turn off the recirculation button and set the fan speed to 4 or higher—the higher the speed, the faster the ice will melt. For automatic air conditioning, simply select the front window defrost button on the center console, and the system will automatically adjust to the highest temperature and maximum fan speed. 2. Ice removal tools: If you live in a particularly cold area where the windshield freezes every morning, consider purchasing ice removal tools such as an ice scraper. These tools can be quicker and more effective. 3. De-icer: Car window de-icer is a specialized antifreeze concentrate designed to thaw frozen windows and wipers without damaging the car's surface. It can effectively prevent window freezing even without using the car's heater. If ice has already formed, simply spray the de-icer onto the inner surface of the car window and wipe it clean.
10
0
Share

How to Charge a Motorcycle When the Battery is Dead?

When a motorcycle's battery is dead, you can remove the battery from the vehicle and charge it using a dedicated charger. If you don't have a charger, you can take it to a professional motorcycle repair shop for charging. Before charging, first remove the battery from the motorcycle and inspect it. If there is obvious sulfation, deposits accumulated below the electrodes, or cracks and leakage on the battery's surface, the battery should be replaced. If your motorcycle battery is dead, you can use the following methods to charge it: 1. Self-charging while riding: By pushing the motorcycle or using other methods to start the engine, the motorcycle's magneto can generate electricity and automatically charge the battery. The motorcycle magneto, also known as the motorcycle generator, is a small alternator that uses permanent magnets to create a magnetic field. The generated current is then rectified through a rectifier circuit to power the motorcycle's lights, battery, etc. 2. Using a charger: Standard 12V DC chargers cannot charge a motorcycle battery because their output current is too low. Nowadays, there are many smart dedicated chargers on the market that can automatically identify 12V and 24V batteries and come with multiple protection features, making them suitable for charging motorcycle and car batteries. You can use such chargers to replenish the power of your motorcycle battery.
13
2
Share

What Causes the Chassis Noise in BMW 3 Series?

Here are the reasons and solutions for the chassis noise in BMW 3 Series: 1. Disc Brake: This is caused by damage, deformation, or detachment of the brake shoe support plate, damping spring plate, or guide plate of the disc brake, which increases the clearance between the brake shoe and the caliper support frame, resulting in mutual impact and noise. You can go to a repair shop to fix the deformed parts or replace the detached ones. 2. Front Suspension Ball Joint: The gap between the ball joint and the ball joint seat becomes larger, causing severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, you can only go to a repair shop for replacement in this case. 3. Front Wheel Shock Absorber: Vehicles often drive on rough roads and are poorly maintained, leading to oil leakage and damage of the shock absorber. At a repair shop, the severity of the damage will determine whether it needs repair or replacement. 4. Drive Shaft Universal Joint: The noise from the constant velocity universal joint is due to excessive clearance or jamming. The main cause of noise from the universal cross shaft is the lack of lubrication or delayed maintenance. In this case, you should go to a repair shop for lubrication or repair.
7
0
Share

What is the fuel consumption per 100 kilometers for a 1.3L engine?

A car with a 1.3L engine is expected to consume approximately 6.5 liters of fuel per 100 kilometers. The fuel consumption per 100 kilometers refers to the average fuel consumption of a car when driving on the road, measured per 100 kilometers. It is an indicator of a car's fuel efficiency. The engine displacement only reflects the characteristics of the engine, while the overall fuel consumption of the vehicle may differ. Here are several methods to reduce fuel consumption while driving: 1. Strengthen car maintenance: Car adjustments and maintenance affect engine performance and driving resistance. Car owners should regularly perform routine maintenance at a repair shop, such as checking tire pressure, wheel alignment, adjusting brake pad and drum clearance, lubricating chassis points, changing oil on schedule, and checking filters. Additionally, choose the least viscous oil specified in the manual, as higher viscosity increases friction and fuel consumption. 2. Avoid prolonged engine idling: The fuel consumption of an idling engine is much higher than during normal driving. Therefore, if the vehicle is not moving for an extended period, such as when parked and waiting, it is best to turn off the engine. During cold starts, warming up the car should not exceed 1 minute, and maintaining low-speed driving for a few minutes is sufficient.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.