Where is the turn signal located on the car?

1 Answers
LaRobert
07/30/25 12:45am
The turn signals are located on both the upper and lower sides of the front and rear of the vehicle. Below are some usage scenarios related to turn signals: 1. Pulling over: When needing to pull over, the driver should activate the right turn signal in advance and observe the traffic dynamics on the right rear side of the car before pulling over. 2. Starting off: When leaving a parking space, the driver should activate the left turn signal in advance and observe the traffic dynamics on the left rear side of the car before moving into the lane. 3. Intersections: When approaching most intersections, the driver should activate the turn signal in the intended direction of travel at a distance of 30-10 meters from the intersection. 4. Overtaking: When overtaking on roads without a solid center line marking, the driver should activate the left turn signal and sound the horn.
Was this review help?
14
4
Share
More Forum Discussions

What is the real fuel consumption of the 2.7 Prado?

2.7 Prado fuel consumption is 13.8L/100km. Power performance: The Prado is the latest model in Toyota's Land Cruiser (Land Cruiser Prado) series. This newly developed next-generation off-road vehicle is equipped with a newly developed Toyota six-cylinder electronically injected 1GR-FEV6 engine, with a displacement of 3956cc. It offers excellent power performance and meets the latest European Ш emission standards, making it highly environmentally friendly. Suspension and design: The vehicle features a highly robust frame and reinforced suspension system, providing considerable off-road capability and passability. It boasts a brand-new exterior design, high-quality interior, and effective sound insulation.
16
0
Share

How often should the transmission fluid be changed for the 2018 New LaCrosse?

For the 2018 New LaCrosse, it is generally recommended to change the transmission fluid every 3 years or approximately 60,000 kilometers. The replacement cycle varies for different models. Below are the recommended intervals for transmission fluid changes: Manual Transmission: Manual transmission fluid is generally recommended to be changed every 3 years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be changed every 2 years or approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be changed every 2 years or approximately 60,000 kilometers. The methods for changing transmission fluid are as follows: 1. Drain the fluid by loosening the drain plug at the bottom of the transmission, then refill it. 2. Remove the transmission oil pan to drain and refill the fluid: This method is more thorough than the first, as it removes impurities from the bottom of the oil pan. 3. Use a circulation machine for automatic transmission fluid change: A smart circulation machine can perform a dynamic fluid change, filtering and cleaning sludge and impurities inside the automatic transmission.
14
5
Share

Does the 2018 CR-V base model have a maintenance light reset button?

It has a maintenance light reset button. You can use the function buttons on the steering wheel to reset it. Turn the CR-V's power to ON mode. Continuously press the (Display/Information) button until "Maintenance" appears on the display. Press the Enter button, and then the engine oil monitor will appear on the screen. Finally, hold the Enter button for about 10 seconds, and the maintenance light will be successfully reset. Other methods to reset the maintenance light: You can use the personalization function to reset it. First, ensure the CR-V's power mode is in ON mode, the vehicle is completely stopped, and the gear is in P. Press the information display button on the left side of the steering wheel, then select the clock vehicle settings display, where you will see the "Vehicle" option. Then press vehicle maintenance, and the information reset will be completed. You can also use the function buttons on the steering wheel to reset it. Turn the CR-V's power to ON mode. Continuously press the (Display/Information) button until "Maintenance" appears on the display. Press the Enter button, and then the engine oil monitor will appear on the screen. Finally, hold the Enter button for about 10 seconds, and the maintenance light will be successfully reset. Alternatively, you can turn off the ignition switch and insert the ignition key into the slot below the tachometer to reset. Press and hold the button below the instrument panel on the right side of the steering column for 3 seconds to complete the reset. Hold the SELECT and RESET buttons on the right side of the combination meter, turn on the ignition switch, release the buttons after 10 seconds, and the reset will be completed.
17
1
Share

Where is the air conditioning switch located in the 2007 Audi model?

2007 Audi model's air conditioning switch is located on the car's air conditioning panel, and the AUTO button serves as the heating switch. The usage method for the 07 Audi model's air conditioning is as follows: Turning on the air conditioning: After starting the vehicle, locate the AUTO button. If the light is off, it means the air conditioning is in the off state. Press it to activate the automatic air conditioning. After turning on the air conditioning, press the fan button to activate the fan for airflow. After turning on the air conditioning, find the temperature control knob. Turning it to the left (blue direction) cools the air, while turning it to the right (red direction) heats the air. Adjust the airflow direction of the fan according to the needs of the driver and passengers. In winter, you can also press the seat heating button to make the seats more comfortable. Maintenance methods for Audi air conditioning: Replacing the dust filter: Routine air conditioning system cleaning includes replacing the filter, using cleaning agents, and dismantling for cleaning. Replacing the dust filter is the simplest method, which is cost-effective and ensures smooth air intake. Car owners with basic mechanical knowledge can perform this cleaning themselves. In most small cars, the dust filter is located under the front windshield, covered by the rain gutter.
16
3
Share

Does the 2010 Hyundai IX35 have Bluetooth functionality?

2010 Hyundai ix35 comes with Bluetooth functionality, and its Bluetooth switch is located on the central control display. The method to connect Bluetooth for Hyundai ix35 is as follows: Find the Bluetooth settings interface on the central control display and turn on the Bluetooth function. At the same time, enable the Bluetooth function on your phone and set it to "Visible to All" or make it discoverable. You can either search for the car's Bluetooth on your phone or search for your phone's Bluetooth via the car's Bluetooth system. Once found, proceed with pairing and connection, completing the pairing with the default or set password. Upon successful connection, the car's Bluetooth settings will display a successful pairing notification, and you can then use Bluetooth for calls or music. Reasons for Bluetooth connection failure: Unstable Bluetooth signal from either the phone or the car's system—restart the system and reconnect. The car's Bluetooth has reached its connection limit—delete some connected devices from the car's Bluetooth settings. The phone is too far from the car's Bluetooth—move the phone closer to the central control screen for better signal. The phone's Bluetooth is already connected to another nearby Bluetooth device—disconnect it. Faulty Bluetooth device in either the car or the phone—visit a repair shop for inspection and repair.
11
4
Share

Is the 2011 ix35 still worth buying?

2011 ix35 is not worth buying, because the used cars of this year are already over 10 years old, and the performance and value of the car are very low. Overview: Hyundai ix35 is an SUV model. Hyundai ix35 will serve as the successor model of Tucson, officially introduced for domestic production in 2010. Beijing Hyundai stated that the domestic version of ix35 will no longer use "Tucson" as the model name. Design: The exterior design of ix35 was completed at the R&D center in Frankfurt, Germany, so the appearance of ix35 has a distinct European style, fashionable and avant-garde, strong and dynamic. To summarize the design language of ix35 with the official slogan, it's fluidic sculpture.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.