Where is the turbocharger installed?

1 Answers
DelDaniela
07/30/25 7:39am
Normally, the turbocharger of a car is located near the exhaust manifold. You can check by opening the engine hood. Some cars have the exhaust manifold at the front, while others have it at the rear. Here is more information about turbochargers: 1. A turbocharger consists of two parts: one is the intake turbine, and the other is the exhaust turbine. The exhaust turbine is connected to the exhaust manifold. When the engine reaches a certain speed, the exhaust has enough energy to drive the exhaust turbine to rotate. The exhaust turbine is connected to the intake turbine via the same shaft. Once the exhaust turbine starts rotating, the intake turbine also begins to rotate, compressing air and blowing it into the cylinders. 2. Turbocharging technology can increase the amount of air entering the engine without increasing the engine displacement, thereby enhancing the engine's power.
Was this review help?
11
0
Share
More Forum Discussions

How to Deal with Stains on Car Paint?

It is particularly important to promptly address stains on car paint. If detected early, they can be wiped off directly with a cloth. However, if paint or grease stains have been present for a long time, the paint surface may develop wrinkles, bubbles, cracks, or the so-called "orange peel" effect. In such cases, simply waxing is no longer sufficient. It is necessary to use sandpaper specifically designed for car cleaning to remove the paint or grease stains, followed by waxing to restore the shine of the car surface. Below are solutions for yellowing white car paint: 1. Wash the car frequently: Most cars are parked outdoors, exposed to wind, rain, and sunlight, which can oxidize the paint. Rainwater contains a large amount of acidic substances that can be corrosive. If not cleaned in time, the car will lose its shine and yellow more quickly. White cars are more susceptible to yellowing compared to other colors, so frequent washing is essential. 2. Waxing: Another reason white cars are prone to yellowing is that the paint surface has many tiny gaps, which are difficult to see with the naked eye but can absorb dust particles from the air, accelerating paint oxidation. Therefore, the best solution is to apply wax, which forms a protective film on the paint surface, effectively preventing yellowing. 3. Glaze sealing maintenance: Cars are inevitably prone to scratches, which can leave marks. Repainting can easily result in mismatched paint colors. Therefore, it is advisable to perform a glaze sealing treatment to maintain the paint's shine.
3
1
Share

How long after failing the driving test subject 2 can you retake it?

If you fail the subject 2 driving test, you need to wait ten days before you can reschedule. For the subject 2 test, if you fail the first attempt, you are allowed one retake. If you do not take the retake or fail the retake, the current test session is terminated, and the applicant must reschedule the test after ten days. Below are some important notes for the subject 2 driving test: 1. Fasten your seatbelt: Buckle up immediately after getting in the car. Make sure not to fasten it backward or to the passenger seat, as the system will directly deem the test a failure. Do not unfasten the seatbelt during the entire test. 2. Adjust the seat and mirrors: After entering the car, adjust the seat and mirrors, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the test: There is no time limit for reversing into the parking space, but you must not stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial. 4. The hill start time limit is 30 seconds: The time allowed for hill starts is 30 seconds, with a voice prompt every 10 seconds. Exceeding 30 seconds will result in an automatic failure.
2
4
Share

What Causes the Jerking Sensation When Shifting Gears in a Car?

Car gear shifting has a jerking sensation due to improper driver operation and mismatched engine speed with gear position. Below is a related introduction about jerking during car gear shifting: Improper driver operation: The intensity of the jerking sensation during gear shifting is closely related to the driver's control skills. If the timing of gear shifting is not well grasped, there will naturally be a jerking sensation. Gear position switching, including automatic transmission cars, has protection and interlock mechanisms. If switching from D gear to R gear or P gear is done incorrectly, it can be dangerous during driving. However, switching between D gear and N gear can be done freely, including while driving. Mismatch between engine speed and gear position: The jerking sensation during gear shifting is mainly caused by the mismatch between the car's engine speed and wheel speed. The main function of the transmission is to change the speed ratio between the engine and the wheels, expanding the range of speed changes to adapt to speed variations in different environments. Therefore, the transmission can reduce this jerking sensation to a certain extent, making the power output smoother. Generally, the better the transmission and engine are matched, the smaller this jerking sensation will be.
4
3
Share

What do you need to prepare for a driver's license inspection?

To inspect a driver's license, you need to bring the driver's license, ID card, four one-inch white-background color photos, and a physical examination certificate from a county-level or above institution. According to the driver's license application regulations, drivers aged 60 or above, or those holding licenses for large buses, trailers, city buses, medium-sized buses, large trucks, trolleybuses, or tramcars must undergo an annual physical examination. Below are the precautions for license renewal: 1. Less than one year expired: The license can be renewed normally if it has been expired for less than one year. 2. One to three years expired: If the license has been expired for more than one year but less than three years, it will be canceled, but you can renew it by passing the subject one test. 3. More than three years expired: If the license has been expired for more than three years, it will become invalid and cannot be renewed.
19
0
Share

How to Earn Points for a Deducted Driver's License on the Phone?

You can log in to the Traffic Management 12123 app, register and bind your account, then proceed with learning under the 'Learn to Reduce Points' option. For the first time within a point period where 12 points are deducted, you can study on your phone. However, you still need to visit the traffic police station for processing, as your driver's license will be temporarily suspended. On the phone, you need to study for three hours daily for seven consecutive days. After completing the study, you must schedule an appointment at the traffic police station to take the subject one test. Below are some precautions regarding the use of a driver's license: 1. Driver's licenses have an expiration date: A driver's license is only valid for legal road use within its expiration period. Driving with an expired license without renewal is considered illegal. 2. Avoid accumulating 12 points within 12 months: A driver's license has 12 points that can be deducted within a 12-month period. It is crucial to avoid accumulating 12 points within this timeframe; otherwise, you will need to attend a learning session at the local vehicle management office and take an exam afterward. If you fail the exam, you must retake it until you pass before you can retrieve your driver's license.
8
3
Share

Can a motor vehicle make a U-turn when entering the left lane?

Whether a motor vehicle can make a U-turn when entering the left lane depends on the signs at the intersection. For example, U-turns are not allowed at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections prone to danger. U-turns can be made at locations without no U-turn or no left-turn signs or markings, but they must not hinder the passage of other normally moving vehicles and pedestrians. Below are precautions for making U-turns: 1. U-turns are allowed when there are no prohibition signs: Generally, when there is no no U-turn sign, U-turns can be made as long as they do not affect normally moving vehicles and safety is ensured. Typically, the central median barrier will change from a solid line to a dashed line near the intersection. 2. U-turns can be made on yellow grid lines: U-turns can be made on yellow grid lines without a central barrier. Yellow grid line areas indicate no parking and are usually set up at intersections prone to temporary parking blockages or entrances/exits of important institutions.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.