Where is the trunk switch of the Sylphy located?

3 Answers
AaronFitz
07/29/25 6:20pm
Sylphy's trunk switch is located in the following two positions: 1. On the dashboard: The Sylphy's trunk can be opened by pressing the release switch on the driver's dashboard. 2. Internal trunk lid release: The release handle is located in the middle under the trunk. Access the release handle from the rear seats and pull it firmly until unlocked. Here are more details about the Sylphy: 1. Body dimensions: The Sylphy measures 4641mm in length, 1815mm in width, 1450mm in height, with a wheelbase of 2712mm. 2. Powertrain: The Sylphy is equipped with a China VI emission-compliant 1.6L naturally aspirated engine, delivering maximum power of 99kW (135 horsepower) and peak torque of 159Nm, mated to a CVT transmission.
Was this review help?
4
1
Share
SanLeo
08/14/25 11:01am
I'm quite familiar with the location of the Sylphy's trunk switch, as I often help friends move using their cars. Generally, the standard position is on the driver's side door panel, near the window, where there's a noticeable button—just press it to open the trunk, which is quite convenient. However, the location may vary depending on the model year. For example, older Sylphy Classic models might have the button on the door, while newer Sylphy Intelligent versions may integrate it into the key fob—holding down the trunk icon on the remote key for a few seconds can also unlock it. I recommend checking the door panel button first; if you can't find it, try the key. For premium trims, the external trunk handle can also be pressed to open, though the button is the most common. The design is very user-friendly, easily reachable with a simple stretch. Most drivers adapt quickly, but first-time users should consult the owner's manual to avoid confusion during trips. Safety reminder: Always operate the switch after the car is parked, as it may auto-lock during driving to prevent accidental opening. Keep a small lock chain handy in case of malfunctions.
Was this review help?
16
2
Share
Expand All
Freya
10/14/25 5:30am
Driving the Sylphy for daily commuting, the trunk switch position is super convenient, right on the button of the driver's side door handle. Just press it to open, making it especially quick for me to load my backpack and luggage for work. There's also a trunk button on the key fob—hold it for two seconds to automatically unlock, which is super handy in parking lots. The switch location might vary slightly between different models; on my new Sylphy, it's on the door panel and responds with just a light touch. Female drivers should be careful not to drop the key—having an interior switch is the most practical. The position is obvious, and it's easy to learn and handle. The trunk can also be opened directly by pressing the external handle, which is useful in emergencies. The switch design is reasonable, and combined with the light indicator, it's even easier to find. It's also quick to use in rainy weather. I recommend trying it out a few times to get used to it and avoid fumbling during gatherings. Operate safely—open the trunk when parked to prevent items from slipping out.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How often should the spark plugs be replaced on an A4?

Typically, the spark plugs in an Audi A4 need to be replaced every 40,000 to 60,000 kilometers. How spark plugs work: Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, igniting the air-fuel mixture in the engine's combustion chamber. Steps for replacing spark plugs: Open the hood, lift the plastic engine cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the correct firing order, then reattach the cover.
5
3
Share

How Often Should a Volkswagen Vehicle Undergo Its First Maintenance?

Volkswagen vehicles typically require their first maintenance between 3,000 to 5,000 kilometers, with specific intervals varying by model as designated by the manufacturer. Below are the detailed explanations: First Maintenance Timing: The first maintenance for a new car is recommended within 3-5 months or upon reaching 3,000 to 5,000 kilometers, whichever comes first, based on either the mileage or the stipulated maintenance period. First Maintenance Items: The service includes tightening components in the vehicle's front engine compartment and inspecting and securing all mechanical connection nuts throughout the car. It also involves checking tire tread and pressure, removing small stones and debris from the tires, replacing the engine oil and oil filter, conducting a software check on the vehicle's electronic systems, inspecting and adjusting all lights, and examining the suspension and braking systems.
13
1
Share

What is the wading depth of the Jimny?

The wading depth of the Jimny is 190mm. The wading depth of the Jimny is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Jimny is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the automatic start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose the entry point carefully. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly. Instead, choose an alternative route.
18
5
Share

Where is the rear fender located on a car?

The rear fender is the exterior body panel that covers the wheel, located above the right rear wheel of the car. The fender is also known as the wing panel. Its function is to prevent sand, gravel, and mud kicked up by the wheels from splashing onto the underside of the vehicle during driving. Therefore, the materials used must be resistant to weather aging and have good formability and processability. Some cars have front fenders made of a certain elastic plastic material, which provides cushioning and enhances safety. The term "fender" originates from the shape and position of this component on older car bodies, resembling a bird's wing. It refers to a covering part on motor vehicles and non-motor vehicles. Based on installation location, fenders are categorized into front fenders and rear fenders. Design principle of fenders: Since the front wheels have steering functionality, the design must ensure maximum space for wheel movement. Designers use "wheel travel diagrams" based on selected tire models and sizes to verify the dimensions of the fender design. Rear fenders do not face wheel contact issues, but for aerodynamic considerations, they are slightly arched and protrude outward. Functions of fenders: Besides preventing mud and stones, fenders also reduce wind resistance generated during driving, contributing to the car's stability. Fenders also protect the chassis. During vehicle use, fenders are highly susceptible to damage, with cracking being the most common issue. Daily maintenance and replacement considerations: The side panels are not a single unit. Although exterior panels are less critical in collisions, they affect the overall aesthetics of the vehicle and cannot be simply repaired with filler paste. Gas shielded welding generates significant heat, which can burn off the factory-applied anti-corrosion coating. Areas not visible from the inside generally do not receive anti-corrosion treatment, and if done, it may not match the factory standard, potentially leading to rust. Replacing the rear fender may cause misalignment with the rear door lock, as manual welding and measurement cannot achieve the same precision as factory installation.
2
1
Share

Is It Normal for a Dual-Clutch Transmission to Make Metal Clashing Noises When Shifting?

It is normal for a dual-clutch transmission to produce metal clashing sounds under certain conditions. Definition of Dual-Clutch Transmission: A dual-clutch transmission is a relatively simple automatic transmission in structure. Its design is similar to that of a manual transmission, with the only difference being that it has an additional set of clutch and gear-shift control mechanism. Function of Dual-Clutch Transmission: One set of the dual-clutch transmission's clutches is responsible for controlling the odd-numbered gears, while the other set controls the even-numbered gears. The dual-clutch transmission offers fast shifting speeds and relatively high transmission efficiency.
17
3
Share

Is the domestic Ninja 150cc sufficient for daily use?

Domestic Ninja 150cc is sufficient for daily use. Performance characteristics: The performance characteristics of the Ninja engine, its lightweight handling, extremely light clutch pull, and relatively relaxed ergonomics together create an optimal environment for novice riders to easily get started without experiencing discomfort or pressure. The increase in horsepower also satisfies some experienced riders. Ninja fuel consumption: The motorcycle consumes 3 liters of fuel per 100 kilometers. The fuel consumption of a motorcycle is not only related to the motorcycle itself but also closely connected to the driver's driving habits and road conditions.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.