Where is the trunk switch of the Changan Alsvin located?

Should You Look at Horsepower or Torque for Hill Climbing?

The hill-climbing capability of a car mainly depends on torque and the RPM at which peak torque is achieved. The lower the RPM at which peak torque is reached and the higher the torque value, the better the hill-climbing performance and the greater the initial acceleration G-value. A car's hill-climbing ability is evaluated by its maximum climbable gradient, which refers to the steepest slope it can overcome in first gear on a good road surface when fully loaded. The maximum climbable gradient represents the vehicle's hill-climbing capacity and is one of the indicators used to evaluate a car's dynamic performance. Below are the factors that influence the maximum climbable gradient: 1. Torque: Torque ensures the engine doesn't stall during climbing and is related to engine power and load conditions (empty or fully loaded). 2. Friction: Friction prevents slipping while ascending the slope.

16

0

Share

What stickers are required on car windows?

There are three types of stickers required on car windows: the annual inspection sticker, the environmental protection sticker, and the compulsory traffic insurance sticker. Here is relevant information about the compulsory traffic insurance sticker: 1. Sticker is no longer mandatory: It should be noted that before the cancellation of the compulsory traffic insurance sticker, the environmental protection sticker for vehicles had already been abolished, and the annual inspection sticker has also been digitized. Therefore, it is no longer mandatory for vehicle owners to display stickers on their vehicles. 2. Digitalization trend: Digitalization is a major trend, which not only reduces costs, saves resources, and eliminates the hassle of tearing off/attaching stickers for vehicle owners, but also does not obstruct the driver's view, ensuring driving safety. Additionally, it can improve work efficiency to some extent, making it a win-win situation.

8

3

Share

How to Deal with Engine Carbon Deposits?

Engine carbon deposit cleaning methods are as follows: First, use a carburetor cleaner to clean the throttle valve. Then, open the oil cap, pour the entire can of cleaner in, close the oil cap, and idle the engine for 10 minutes before shutting it off. Finally, pour the intake system cleaner into the liquid storage tank of a dedicated cleaning device, connect it to the intake system, and start the engine to use vacuum to draw the cleaner into the intake pipeline for cleaning purposes. Here are some relevant information about carbon deposits: 1. Definition: Carbon deposits refer to sludge-like colloidal substances produced when fuel and oil vapor that leaks into the combustion chamber cannot be completely burned. These deposits accumulate over time and, under the repeated high temperatures of the engine, eventually form carbon-like substances. They can be found on components such as intake and exhaust valves, spark plugs, fuel injectors, and the top of pistons. 2. Types of Carbon Deposits: Carbon deposits can be categorized into valve and combustion chamber deposits and intake pipe deposits.

3

2

Share

Which light is the overtaking light?

Overtaking light refers to the light that activates when the high beam is pressed down and automatically turns off when released. Below are precautions for overtaking with a vehicle: 1. Observe traffic conditions: Before overtaking, observe the road conditions ahead and try to choose flat, straight roads. Also, check the situation of the lane you intend to use by looking in the left rearview mirror to see if there are any vehicles overtaking from behind. Wait for the vehicle behind to complete its overtaking maneuver before proceeding with your own. 2. Light usage: When conditions for overtaking are met, turn on the left turn signal, then alternate between high and low beams and honk to alert the vehicle in front. Once you confirm that the vehicle ahead has signaled to yield, you can steer to the left. 3. Driving in the borrowed lane: If you are already in the borrowed lane, downshift and press the accelerator deeply to increase engine RPM and boost power. The reason for downshifting is that when accelerating, downshifting and pressing the accelerator provides a quicker response, allowing for faster speed increase.

18

0

Share

How many parts does the Subject 3 driving test consist of?

Two parts, namely the road driving skills test and the safety and civilized driving knowledge test. Below are the key challenges in the Subject 3 test: 1. Speed and gear mismatch: Errors such as high gear with low speed or low gear with high speed should be avoided during the test. Before shifting gears, ensure the speed is adjusted to match the gear, then proceed with the shift. 2. Deviation in straight-line driving: Many trainees slow down excessively due to concerns about not driving in a straight line, which is not advisable. This actually increases the likelihood of the vehicle deviating from its path. Maintain a reasonable and steady speed instead. Although significant steering wheel adjustments are not allowed during straight-line driving, minor adjustments (around 5 degrees) are permissible if the vehicle was not properly aligned before the test or if deviations are noticed during driving. 3. Parking more than 30cm from the curb: The Subject 3 test explicitly requires that the distance from the curb when parking should not exceed 30cm.

3

4

Share

What does Super Select 4WD mean?

Super Select 4WD is an electronically assisted SS4-II system. Below is relevant information about Super Select 4WD: 1. Advantages: The Super Select 4WD system allows the vehicle to freely switch between 2H and 4H gears at speeds up to 100 km/h. When in the 4H position, it functions similarly to a full-time four-wheel-drive vehicle, providing better traction and driving force. In the 2H position, pure rear-wheel drive improves fuel economy to some extent, giving drivers greater flexibility in their choices. 2. Historical Background: Super Select 4WD is Mitsubishi's patented technology with a history spanning many years. Since its debut in the early 1990s, it has been successively equipped on third-generation models (such as V73, V77) and fourth-generation models (such as V93, V87, V97). The Super Select 4WD has evolved from the first-generation purely mechanical SS4 system to the current electronically assisted SS4-II system.

11

4

Share

Where is the trunk switch of the Changan Alsvin located?

Should You Look at Horsepower or Torque for Hill Climbing?

What stickers are required on car windows?

How to Deal with Engine Carbon Deposits?

Which light is the overtaking light?

How many parts does the Subject 3 driving test consist of?

What does Super Select 4WD mean?

Is there traffic restriction in Shenzhen on weekends?

Do You Need to Turn on the Width Indicator Lights When Driving at Night?

Can a 5-seater car accommodate 4 adults and 2 children?

How to Open the Cover of a Maintenance-Free Battery?