Where is the trunk switch of the Buick Excelle?

1 Answers
DeDaniel
07/30/25 7:42am
The trunk switch of the Buick Excelle is located on the remote key and the side door trim panel in the driver's compartment. Press the remote key twice in succession to open the trunk, or press the button on the side door trim panel in the driver's compartment to open the trunk. Additionally, in models with non-foldable rear seats, there is an emergency trunk release handle under the middle cover panel behind the rear seats. Open the cover panel and pull the rope handle inside to release the trunk. Below is an introduction to the Buick Excelle: 1. The all-new Excelle adheres to Buick's "dynamic and fluid" design language, drawing inspiration from the classic elements of the Riviera concept car. Its body styling exudes a sporty yet stable appearance, showcasing the Excelle's grand, simple, elegant, and dynamic style. The new wing-shaped chrome-plated front grille, combined with black piano vertical grilles and high-gloss chrome-plated wing grilles, naturally draws the visual focus of the front to the emblem. At the same time, the wing grille extends horizontally to the headlights on both sides, enhancing the horizontal visual effect and overall cohesion of the front. 2. The new powertrain system includes a 1.3T+48V mild hybrid engine and the classic 1.5L DVVT four-cylinder engine, comprehensively balancing power, fuel efficiency, and an excellent driving experience. The diverse options cater to the needs of different consumers, delivering an efficient and agile driving experience.
Was this review help?
3
2
Share
More Forum Discussions

How to Load Discs into an Infiniti 6-Disc CD Changer?

To load discs into an Infiniti 6-disc CD changer, first press the eject button, then press the right-side numeric buttons 1-6. If there is a disc in the pressed button's position, it will eject one disc; if not, it will perform an opening action. Insert the discs sequentially. Below are the operation steps when there are no discs in the disc tray: 1. Sequential loading: Press and hold the LOAD button (for 3 seconds) to load discs in sequence. 2. Single disc loading: Briefly press the LOAD button, and the indicator light for button 1 will slowly flash for 3-4 seconds, then change to rapid flashing, indicating the disc tray is ready to accept a disc. During this time, push in the disc, and the disc tray will perform the loading action.
19
3
Share

Why can't the sunroof of an Audi Q5 be closed?

Audi Q5 sunroof may not close due to system operation issues, you can try repeatedly closing the sunroof while driving. The Audi Q5 is equipped with a panoramic solar sunroof, and in actual driving, there may be situations where the sunroof cannot be closed. Here are the solutions for when the Audi Q5 sunroof fails to close: 1. System operation issue, try repeatedly closing the sunroof while driving. 2. Press the sunroof tilt button, pull it down and forward. Then set in the MMI: long press the lock button to close the windows. 3. It may be due to excessive resistance causing the motor to overheat and trigger protection, which is common after summer exposure. Parking in a shaded area for a while may help. Consider adding lubricant or adjusting the sunroof.
2
2
Share

Battery Model of Zotye T600

The battery model used in the Zotye T600 is 55d23l. Below is some relevant information about the Zotye T600: 1. The Zotye T600 is a mid-size SUV under the Zotye brand. 2. It is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. Here are the details about the 1.5-liter and 1.8-liter turbocharged engines: 1. The 1.5-liter turbocharged engine delivers 162 horsepower and a maximum torque of 215 Nm, with a maximum power output at 5500 rpm and a maximum torque range from 2000 to 4400 rpm. This engine features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission (6AT). 2. The 1.8-liter turbocharged engine produces 177 horsepower and a maximum torque of 245 Nm, with a maximum power output at 5800 rpm and a maximum torque range from 2000 to 4000 rpm. This engine also features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed dual-clutch transmission (DCT) or a 7-speed dual-clutch transmission.
2
4
Share

How to Remove Fog Inside the Car on Rainy Days?

Fogging on rainy days is caused by the car window temperature being below zero or a temperature difference between the two sides of the window. There are five solutions: spraying anti-fog window spray, using air conditioning cooling, using air conditioning heating, using anti-fog wipes, and employing rain deflectors to assist in defogging. The detailed methods are as follows: 1. Spray Anti-Fog Spray: Spray a small amount of anti-fog spray onto the car window and wipe it clean to remove dirt and stains. While polishing the glass, it forms a thin transparent protective film that effectively prevents water vapor from condensing into fog on the glass, especially suitable for cold winters. 2. Air Conditioning Cooling: There are two reasons for window fogging in winter: low temperature and high air humidity. Using the cooling effect of air conditioning to reduce air humidity can remove window fog. Owners can turn on the air conditioning to blow cold air toward the front windshield and use the dehumidification function to eliminate fog. 3. Air Conditioning Heating Method: In winter, blowing hot air onto the glass with the heater can quickly raise the temperature of the front glass and reduce the temperature difference between the inner and outer surfaces, preventing excessive fogging on the front windshield. 4. Anti-Fog Wipes: Generally divided into ordinary anti-fog wipes and anti-fog wet wipes. The difference is that ordinary anti-fog wipes can only be used when fog has already formed on the windshield, while wet wipes can be used directly to prevent fogging. 5. Rain Deflector Assistance Method: Rain stains on side mirrors that are exposed for a long time are often difficult to clean. For defogging purposes, many owners of models without side mirror heating functions choose to install rain deflectors on their side mirrors.
5
2
Share

How to Adjust the Rearview Mirror on the Bin Yue?

When the ignition switch is in the "ON" position, move the "Left/Right Mirror Selection" switch to the left or right side, and use the "Mirror Adjustment" switch to adjust the mirror. Below are the types of rearview mirrors explained: 1. Interior Rearview Mirror: The interior rearview mirror allows the driver to confirm the rear view without significantly changing the forward line of sight while driving. 2. Exterior Rearview Mirror: Passenger vehicles typically mount the exterior rearview mirrors on the doors. 3. Undercarriage Mirror: The undercarriage mirror enables the driver to see areas beyond the front and rear wheels under the car body through the mirror directly in front of the driver's seat. It helps the driver check for people or obstacles near the wheels and the side of the car when reversing or starting forward, preventing injuries, damage to objects, or vehicle harm, providing convenience and safety for the driver.
1
0
Share

What is the original battery model for the Peugeot 408?

Peugeot 408 is originally equipped with a Camel L2-400 battery. Camel batteries are a relatively old brand with a service life of approximately two years. Below are some precautions for battery usage: 1. If a battery is left unused for a long time, it will gradually self-discharge until it becomes unusable. Therefore, it is advisable to start the car periodically to charge the battery. Another method is to disconnect the two electrodes from the battery. Note that when removing the positive and negative electrode cables from the terminals, the negative cable should be disconnected first, or the connection between the negative terminal and the car chassis should be removed. Then, disconnect the other end marked with the positive sign (+). Batteries have a limited lifespan and need to be replaced after a certain period. When replacing, follow the same order as above, but when reconnecting the cables, the order is reversed: connect the positive terminal first, then the negative. 2. When the ammeter indicates insufficient charge, recharge the battery promptly. The battery's charge level can be displayed on the dashboard. If you find the battery insufficient while driving and the engine cannot start, as a temporary measure, you can seek help from another vehicle to jump-start your car by connecting the negative terminals and positive terminals of both batteries together.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.